
Please read the entire instruction manual before using the
product and then save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data.
SAFETY
- Before mounting and maintenance please make sure
that the electrical supply has been switched off to avoid
electric shock.
- The lamp must be earthed.
- Replace any cracked protective shield. It shall be
exclusively replaced by the manufacturer or his service
agent or a similar qualied person to avoid the hazard.
- If the external wire or power cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualied
person to avoid the hazard.
- Never let children play with the product.
- Ensure cable is not touching any sharp objects and the
mains plug connector is adequately protected against rain
or moisture.
- Do not touch the housing or glass of the oodlight when it
is switched on – risk of burn injury.
The light tting must not be replaced by
anyone other than a qualied electrician.
CAUTION: The light source of lamp cannot be replaced,
please replace a whole new lamp if the light source
broken.
ASSEMBLY
1. Remove the xing bracket off the lamp (see Fig.1)
2. Drill the holes for xing bracket at the marked position.
Screw the expansion screws into the wall. Install the xing
bracket onto the wall with suitable screw. (see Fig.2)
3. Fix the lamp to the xed bracket. (see Fig.3)
4. Connect the power cable to main outlet (see Fig.4)
OPERATION
1. The lamp is only suitable for mounting on the wall.
The installation height must be less than 3m (see Fig.5)
2. The lamp can be tilted down 90° and upward 45°.
(see Fig.5)
SPECIFICATIONS
Voltage:.......................220-240V, 50/60 Hz
Power: ........................100 W
Light source: .............. Epistar LED
Luminous ux: ............ 9000 lm
Colour temperature:.... 5000 K
IP class:...................... IP65
Protection class: ......... Class 1
(this light tting must be earthed)
Cable: ........................0,5 m rubber cable with earthed plug
....................................(H05RN-F 3 × 1,0 mm²)
Dimension:..................240×60×330 mm
Weight: .......................2,95 kg
440677_manual.indd 6 16.05.2019 13.24