4. Specifications.
Наименование параметра
■■■■■
■■■
5. Switching on the device.
Attention! The use of the device in open spaces during snowfall or rain is prohibited. If the device is brought
from the street into a warm room, do not turn it on for a time sufficient for the evaporation of condensate from the
device.
Attention! Match the voltage supplied to the TEST PORT with the maximum specifications of the device shown in
the table.
6. Instrument Screen.
Indicator A of the built-in battery status, which, depending on the battery status, can be displayed as:
Indicator B displays the mode in which the navigation buttons (8) are located:
Plot
Span
Freq
Mkr 1 … Mkr 4
Amp
Calibration type designation C:
No Cal
Cal
Cal. Int
Cal. Ext
Frequency reference D:
Start
Stop
Type of graph displayed on the screen of the device E:
Smh
Pol
Ph
Mag
LMag
SWR
DTF
Loss
