KUSSMAUL 091-12 User manual

INSTRUCTION MANUAL
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO., INC.
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796-1221
DATE: 02-10-00
FILE: 091-12-XX
TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: [phone]
AUTO CHARGE 12
AUTOMATIC BATTERY CHARGER
NOTE :
This charger is designed for
vehicles with a single
battery system
MODEL #091-12-XX

INTRODUCTION
TheAutoCharge12isBatteryChargerisacompactcompletelyautomaticchargerdesigned
forinstallationonvehicleswithasinglebatterysystem. Remotesensingpermitslonglines
betweenthechargerandthebatteriesbycompensatingforthevoltagedropinthecharging
wires. An ammeter provides continuous indication of the charger output.
ConstructionoftheAutoCharge12isextremelyruggedtowithstandtheshockandvibration
normallyencounteredbyvehiclemountedequipment.Theunitoperatescompletelyautomati-
callyandstopschargingthebatterieswhentheyarefullycharged.Thereisnotricklecharge
andthereforenodangerofoverchargingandwaterboil-off.Anyparasiticloadsonthebattery
such as radio, lights, etc., are automatically supplied with current by the charger.
INSTALLATION
TheAutoCharge12AutomaticBatteryChargershouldbeinstalledinanareawithadequate
ventilation. A power cord is supplied for connection to 115 volts 60 Hz.
1. Mount the charger using the four holes provided for this.
2. Connect the wiring from the battery to the Output Terminal Strip. Spade lugs that
have been securely crimped, or soldered, should be used.
3. Double check all wiring before proceeding.
5. Wire the A.C. power line cord to 115 volts.
6. Pilot light will light to show that the charger has power.

INSTALLATION WIRING DIAGRAM
NOTE:Thesenseleads mustbe
connected to the battery for the
charger to operate.
IMPORTANT: Wire size is for a
maximumlengthof20feet.Ifwiring
is to be longer, larger wiring is re-
quired.Additionalinformationisavail-
able on request.
WIRE SIZE CHART
CONNECTION ITEM DEFINITION WIRE SIZE
BAT- BATTERY
NEGATIVE NEGATIVE CHARGING LEAD FOR BATTERIES 12 AWG
BAT+ BATTERY
POSITIVE POSITIVE CHARGING LEAD FOR BATTERY # 1 12 AWG
SENSE
-NEGATIVE
SENSE NEGATIVE VOLTAGE SENSE LEAD. DETECTS VOLTAGE 16 AWG
SENSE
+POSITIVE
SENSE POSITIVE VOLTAGE SENSE LEAD. DETECTS VOLTAGE 16 AWG

SPECIFICATION & OUTLINE
SPECIFICATIONS:
Input: 115V 50/60Hz, 2 amps
Output: see chart
Output Current: see chart
Charge Indicator: D.C. amps +5%
Weight: 12 lbs
AUTO CHARGE
4.25
12.75
4.75
6.75
OUTLINE DRAWING
9/32" DIA. 4 HOLES
12.00
SPECIFICATION CHART
MODEL # AMPS VOLTAGE
091-12-6 12 6
091-12-12 12 12
091-11-24 6 24
091-12-32 5 32
091-12-36 4 36
091-12-48 3 48
O91-12-72 2 72
O91-12-96 1.5 96
O91-12-120 1.2 120

INSTALLATION RECORD & WARRANTY
Date Installed
Installed By
Vehicle Identification
Vehicle Owner
WARRANTY
All product of Kussmaul Electronics Company Inc. are warranted to be free
of defects of material or workmanship. Liability is limited to repairing or
replacing at our factory, without charge, any material or defects which
become apparent in normal use within 3 years from the date the equipment
was shipped.
KussmaulElectronicsCompany,Inc.shallhavenoliabilityfordamagesofany
kind to associated equipment arising from the installation and /or use of the
KussmaulElectronicsCompany,Inc.products.Thepurchaser,bytheaccep-
tanceoftheequipment,assumesallliabilityforanydamageswhichmayresult
from its installation, use or misuse, by the purchaser, his or its employees or
others.