KUSSMAUL 091-12HO User manual

INSTRUCTION MANUAL
AUTO CHARGE 12HO
AUTOMATIC BATTERY CHARGER
TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: [phone]
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO., INC.
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796
BOOK# 091-12HO-1
NOTE :
This charger is designed for
vehicles with a single
battery system
MODEL #091-12HO-XX

INTRODUCTION
The Auto Charge 12HO is Battery Charger is a compact completely automatic charger
designedforinstallationonvehicleswithasinglebatterysystem. Remotesensingpermits
long lines between the charger and the batteries by compensating for the voltage drop in
the charging wires. An ammeter provides continuous indication of the charger output.
Construction of the Auto Charge 12HO is extremely rugged to withstand the shock and
vibration normally encountered by vehicle mounted equipment. The unit operates com-
pletely automatically and stops charging the batteries when they are fully charged. There
isnotricklechargeandthereforenodangerofoverchargingandwaterboil-off.Anyparasitic
loads on the battery such as radio, lights, etc., are automatically supplied with current by
the charger.
INSTALLATION
The Auto Charge 12HO Automatic Battery Charger should be installed in an area with
adequate ventilation. A power cord is supplied for connection to 115 volts 60 Hz.
1. Mount the charger using the four holes provided for this.
2. Connect the wiring from the battery to the Output Terminal Strip. Spade lugs that
have been securely crimped, or soldered, should be used.
3. Double check all wiring before proceeding.
5. Wire the A.C. power line cord to 115 volts.
6. Pilot light will light to show that the charger has power.

INSTALLATION WIRING DIAGRAM
NOTE:Thesenseleads mustbe
connected to the battery for the
charger to operate.
IMPORTANT: Wire size is for a
maximumlengthof20feet.Ifwiring
is to be longer, larger wiring is
required. Additional information is
available on request.
WIRE SIZE CHART
CONNECTION ITEM DEFINITION WIRE
SIZE
BAT- BATTERY
NEGATIVE NEGATIVE CHARGING LEAD FOR BATTERIES 12 AWG
BAT+ BATTERY
POSITIVE POSITIVE CHARGING LEAD FOR BATTERY # 1 12 AWG
SENSE
_NEGATIVE
SENSE NEGATIVE VOLTAGE SENSE LEAD. DETECTS VOLTAGE 16 AWG
SENSE
+POSITIVE
SENSE POSITIVE VOLTAGE SENSE LEAD. DETECTS VOLTAGE 16 AWG

SPECIFICATION & OUTLINE
SPECIFICATIONS:
Input: 115V 50/60Hz, 4 amps
Output: see chart
Output Current: see chart
Charge Indicator: 0-25 amps 5%
Weight: 22 lbs
SPECIFICATION CHART
MODEL # AMPS VOLTAGE
091-12HO-6 20 6
091-12HO-12 20 12
091-11HO-24 12 24
091-12HO-32 10 32
091-12HO-36 8 36
091-12HO-48 6 48
AUTO CHARGE
4.25
12.75
4.75
6.75
OUTLINEDRAWING
9/32" DIA. 4 HOLES
12.00

INSTALLATION RECORD & WARRANTY
Date Installed
Installed By
Vehicle Identification
Vehicle Owner
WARRANTY
All product of Kussmaul Electronics Company Inc. are warranted to be free
of defects of material or workmanship. Liability is limited to repairing or
replacing at our factory, without charge, any material or defects which
become apparent in normal use within 3 years from the date the equipment
was shipped.
Kussmaul Electronics Company, Inc. shall have no liability for damages of
any kind to associated equipment arising from the installation and /or use of
the Kussmaul Electronics Company, Inc. products. The purchaser, by the
acceptance of the equipment, assumes all liability for any damages which
may result from its installation, use or misuse, by the purchaser, his or its