Kuvings JUICE EXTRACTOR User manual

JUICE EXTRACTOR. E120511
CAREFULLY READ AND SAVE THESE INSTRUCTIONS
US/CANADA USE ONLY (110/120V)
HOUSEHOLD USE ONLY
JUICE EXTRACTOR
Kuvings US Customer Service:
Phone: [phone]
Email: [email protected]
Headquarters:
NUC Electronics CO., Ltd
679, Chimsan-3Dong, Buk-gu, Daegu, 702-053, Korea
©2012 Kuvings All rights reserved
INSTRUCTION MANUAL
Manual de Instrucciones

2 3
Notice Before Use
. Be careful of knives for they are very sharp.
. Do not push small/large feed tube pusher too strongly to protect knife.
. When you hear noise of vibration, stop machine and take out the remnants from knife and start again
. Please use small feed tube pusher only in large feed tube pusher.
General Notice Before Use
. Make sure to use appropriate voltage.
. Make sure of assembling status for main body, stainless juicing bowl, juicer cover, safety locking arm.
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions.
2. To protect against risk of electrical shock do not put main body in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking o parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped
or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair
or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by the manufacturer may cause re, electric shock or injury.
8. Do not use outdoors .
9. Do not let cord hang over edge of table or counter.
10. Always make sure juicer cover is clamped securely in place before motor is turned on. Do not unfasten clamps
while juicer is in operation.
11. Be sure to turn switch to OFF position after each use of your juicer. Make sure the motor stops completely
before disassembling.
12. Do not put your ngers or other objects into the juicer opening while it is in operation. If food becomes lodged
in opening, use food pusher or another piece of fruit or vegetable to push it down. When this method is not
possible turn the motor o and disassemble juicer to remove the remaining food.
13. Do not use the appliance if the rotating sieve is damaged.
14. When a separable pulp container is provided, Do not operate without the pulp container in place does not t,
contact a qualied electrician. Do not modify the plug in any way.
PartsImportant notes
Pusher
Juicer Cover
Juicing Screen
Stainless Juicing Bowl
Pulp Container Base
Cleaning Brush
Safety Locking Arm

4 5
How to use the juicer Assembly / Operation / Disassembly
3Put pulp container into the juicer cover outlet as shown in the drawing and
then push it until it locks into the juicer
base . Juice may leak out or excessive
vibration may occur when it’s not
tted properly.
1Put juicing bowl on the base and
insert juicing screen rmly into the
base as shown below.
2Put juicer cover on the juicing bowl and push safety locking arm rmly
inward on both sides of the base
until you hear them‘click’as
shown below.
4Please wait 3-5 seconds after turning the unit on before
inserting produce.
Push LOW button
to make natural juice with soft fruits like
watermelon, peeled oranges, etc.
Push TURBO botton
to make natural juice with hard fruits and
vegetables like apples, carrots, celery, etc.
How to assemble How to operate
How to disassemble
. For safety, always make sure the unit is unplugged before assembly or disassembly.
. When assembling the juicer, the parts must be in alignment or the arms will not lock.
. Check that the parts are aligned before locking the arms. If the parts are not aligned as
shown in the manual, forcing the arms shut may cause damage!
. For best results slowly feed large or hard ingredients with the pusher in 2-3 stages,
alternating between pushing and pausing. This technique ensures the maximum
amount of juice extraction and also prevents malfunction.
1Turn the machine o and unplug the power cord from the wall outlet. Pull out
the safety locking arm to disassemble.
Tips
2Follow the assembly steps in reverse to disassemble.
Remove the juicing screen
after disassembling the
juicing bowl from the base.

6 7
PROBLEM SOLUTION
Safety locking arms will
not lock
When assembling the juicer the parts must be in alignment or
the arms will not lock. Check that the parts are aligned before
locking the arms. The parts will only t in the orientation
shown in the manual – do not force the locking arms shut if
parts are misaligned.
Juicer vibrates excessively Stop the juicer and reassemble the juicer properly. In particu-
lar, make sure the juicing screen is properly seated and no
parts are broken.
Juice is leaking from
juice cover outlet during
juicing
Juice may leak out if the pulp container is not tted properly.
Please make sure the pulp container is locked into place.
Motor has slowed down Too much produce is being fed into the juicer at once. Let the
juicer nish processing the produce and be sure to feed more
slowly and/or smaller pieces. Also be sure to use the turbo
setting for hard fruits and vegetables. Stop the juicer and
check that the juicing screen does not have excess pulp build
up – if it does clean juicing screen and be sure to slow the rate
at which you feed produce. Alternating ingredients between
soft and hard produce items can also help.
Motor has jammed Stop the juicer immediately and dissemble and clean the juic-
ing screen. Feed less produce at once to prevent jamming.
Motor stops while juicing
or won't turn back on
after extended juicing
Allow the unit to cool down for 2 hours before resuming
operation.
Pulp is wetter than usual Stop the juicer and check that the juicing screen is not
clogged. Try juicing at a slower rate.
TroubleshootingCare
1Wash with warm water and a gentle dish detergent and wipe dry with a dishtowel.
Clean juicing screen with the supplied
brush, do not use a sponge. (Be careful
when you clean the knives)
2Wipe body clean with a damp towel and be careful not to get the body wet.
Water in the body can cause
a malfunction or electric shock!
3When you wash the juicer, do not use harsh chemicals. These chemicals may
react with and discolor the juicer.4Do not store the juicer in direct
sunlight or high humidity
. Most juicer parts are top shelf dishwasher safe, low temperature cycle recommended.
. For best results hand wash with a soft cloth using mild detergent and towel dry.
. The juicing screen is hand wash only using the included cleaning brush or similar plastic
bristled dish brush).
. When cleaning with plastic brushes please note that occasionally bristles get caught in
the strainer - make sure none are left behind before next use.
. Do not wash any juicer parts with harsh or abrasive cleaners.
. Please wipe the exterior clean using a damp soft cloth.
. Do not wash or submerge the juicer body.
Tips

MANUAL DE
INSTRUCCIONES
JUGUERA
Notes
Electrical Specication
Product Juicer
Model Number NJ-9300U, NJ-9500U, NJ-9600U NJ-9700U
Warranty 3 Year
Voltage/Hertz AC 120V, 60Hz
Power Consumption 350W
Continuous Maximum Use Less than 30 Minutes
Especicaciones Técnicas
Producto Juguera
Modelo NJ-9300U, NJ-9500U, NJ-9600U NJ-9700U
Garantía 3 año
Voltaje/Hertz AC 120V, 60 Hz
Consumo de Energía 350 W
Tiempo Máximo de Uso Continuo menos de 30 minutos