KWIK GOAL FUSION 2B3806SW User manual

ASSEMBLY INSTRUCTIONS FOR SWIVEL WHEELS
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NZ346 Rev. 09/30/22
(A)”
Rubber Pad (8)
(Part# VZ654)
Hairpin Cotter (4)
(Part# TZ351)
Swivel Wheel (4)
(Part# VZ629)
Cable Lanyard (4)
(Part# VZ653)
12”
Parts
Any modifications to this or any Kwik Goal product will void any and all warranties.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Swivel Wheel Mounting Bracket (4)
(Part# UZ1356)
Mounting Bracket Pin (4)
Part# Dim (A) Goal Model Number
TZ347 3-5/16” 2B3306SW 2B3406SW 2B3706SW -
TZ348 5-5/8” 2B2001SW 2B3806SW 2B9006SW 2B9004SW
TZ378 4-3/16” 2B3006SW - - -
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
2019 Kwik Goal Ltd. ©

5. Always exercise extreme caution when moving goals and provide adequate
manpower to move goals of varied sizes and weights. Movable soccer goals
should only be moved by authorized personnel.
4. Always instruct players, managers, coaches, trainers, teachers, maintenance
workers and all other personnel who might come in contact with the goal,
on the safe handling of and potential dangers associated with movable
soccer goals.
6. NEVER allow anyone to climb on the net or goal framework.
7. Movable soccer goals should only be used on LEVEL fields, NEVER on a slope
or hill area.
2. Safety/Warning labels must be clearly visible.
8. Remove nets when goals are not in use.
9. Most of the tip-over injuries occurred when goals were unattended. Anchor
or chain one goal to another or to nearby fence posts, dugouts, or any other
similar sturdy fixture when not in use. If this is not practical, store movable
soccer goals in a place where children cannot have access to them.
10. Fully disassemble goals for seasonal storage.
3. Securely anchor movable soccer goals at ALL times.
IMPORTANT GOAL SAFETY INSTRUCTIONS
READ CAREFULLY
1. Check for structural integrity and proper connecting hardware before every
use. Replace damaged or missing parts or fasteners immediately.
NZ346 Rev. 09/30/22
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
2019 Kwik Goal Ltd. ©

Swivel Wheel
Mounting Bracket
5/16” X 1” Hex Bolt
5/16” Flat Washer
Swivel Wheel
5/16” Lock Nut
4. Attach swivel wheel brackets to swivel wheels.
Assembly Tools
1/2” & 3/4”
Wrenches
Phillips Screwdriver
Ratchet with
1/2” & 3/4”
Sockets
AND
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
1/2” Lock Nut (Part# TZ349) (4)
5/16“ x 1” Hex Bolt (Part# TZ330) (16)
Hardware
5/16” Flat Washer (Part# TZ4) (16)
5/16” Lock Nut (Part# TZ5) (16)
before beginning assembly.
3. Apply rubber pads to swivel wheel mounting
brackets at the center of location shown.
Peel Off Backing
Rubber Pad
Swivel Wheel
Mounting Bracket
Rubber Pad
5. Attach mounting bracket pin to swivel wheel bracket.
To tighten lock nut, insert a phillips screwdriver in
hole on mounting bracket pin. Orient hole to
bracket as shown.
Mounting Bracket Pin
1/2” Lock Nut
Swivel Wheel & Bracket
9/16
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
2B3006SW
ONLY
2B3306SW
2B3406SW
2B2001SW
2B3806SW
2B3706SW
2B9004SW
2B9006SW
Add Pad For
2B3806SW
2B3706SW
2B3306SW
NZ346 Rev. 09/30/22

6. Attach swivel wheel assembly on the outside of
goal frame by lifting goal frame at wheel locations
and insert mounting bracket pin into base
bushing. Never install pin into anchor hole.
Note: Attach one wheel at a time and secure in
place (See step 7 & 8) before attaching
remaining wheels.
7. Loop cable lanyard around handle on swivel wheel
assembly.
Swivel Wheel
Assembly Handle
Cable Lanyard
Base Bushing
Anchor Hole
(NO Bushing)
Swivel Wheel
Assembly
Mounting
Bracket Pin
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ346 Rev. 09/30/22

8. Attach hairpin cotter to cable lanyard and secure swivel wheel to goal frame with hairpin cotter as shown.
WHEELS MUST BE REMOVED
9. All 4 swivel wheel assemblies must be secured to goal
frame before attempting to move goal. A minimum
of 2 people are needed to move one goal.
GOAL MUST BE ANCHORED AT ALL TIMES
DO NOT PLAY GOAL WITH WHEELS INSTALLED
10. Grease wheels and casters as needed to keep them spinning freely.
Hairpin Cotter
Cable Lanyard
Mounting Bracket Pin
Hairpin Cotter
Cable Lanyard
Mounting Bracket Pin
WHEELS
MUST BE
REMOVED
GOAL MUST
BE ANCHORED
AT ALL TIMES
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ346 Rev. 09/30/22
Go to kwikgoal.com for additional product information.