KYK Hisha User manual

KYK HISHA
DISTRIBUTOR MANUAL
Gregory Krasutski, 2015

Table of Contents
1. Open Inlet pH Settings 3
2. Adjust Inlet pH 4-5
Gregory Krasutski, 2015 2

Open Inlet pH Settings
To open the settings tap and hold “Clean/Set” for 7 sec until you
hear the sound signal two times
Gregory Krasutski, 2015 3

Adjust Inlet pH
After you open the settings LED light no. 3 is ON.
LED light no. 3 means that inlet pH is set to 7.3
It is the default inlet pH value.
Gregory Krasutski, 2015 4
Tap “Alkali 3” to increase inlet pH, tap “Purified” to decrease
Tap and hold “Clean/Set” to save your settings
no. 3 no. 4 no. 4
blinking
no. 2
no. 1
no. 1
blinking
pH 7.3 pH 7.7 pH 8.0pH 7.0pH 6.7pH 6.4