3. OPERATION INSTRUCTIONS3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
: At this position, power is connected to start theON :Atthis position, power is connected to start theON
engine. The key cannot be taken out.engine. The key cannot be taken out.
: At this position, power is cut off and the engine
OFF
:Atthis position, power is cut off and the engine
OFF
stops. The key can be taken out.stops. The key can be taken out.
LOCK : At this position, the steering handlebar is locked.LOCK :Atthis position, the steering handlebar is locked.
The key can be taken outThe key can be taken out
Locking MethodLocking Method
Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the "LOCK" position
,the handlebar can be locked.
Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the "LOCK" position
,the handlebar can be locked.
Unlocking MethodUnlocking Method
Turn the ignition switch key right to the"OFF" and the
"LOCK" is released automatically.
Turn the ignition switch key right to the"OFF" and the
"LOCK" is released automatically.
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to the"LOCK" Position
during riding, otherwise the handlebar will be out of
control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to the"LOCK" Position
during riding, otherwise the handlebar will be out of
control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
CAUTION:
ON
OFF
OFF
－－4－－4
