KYMCO Agility City 50 Release note

DRIVER'S MANUAL
KWANG YANG MOTOR CO.,LTD.
AGILITY CITY
50/125

KWANG YANG MOTOR CO.,LTD.
NO.35 Wan Hsing Street, San Min District
Kaohsiung, Taiwan, Republic of PROC
Telephone : [phone]
FAX : [phone]
KWANG YANG MOTOR CO.,LTD.
NO.35 Wan Hsing Street, San Min District
Kaohsiung, Taiwan, Republic of PROC
Telephone : [phone]
FAX : [phone]

Dear KYMCO Motorcycle Users:Dear KYMCO Motorcycle Users:
Thank you for purchasing this KYMCO motorcycle and welcome to the familyThank you for purchasing this KYMCO motorcycle and welcome to the family
of KYMCO motorcycle riders. To enjoy safety and more pleasant riding, becomeof KYMCO motorcycle riders. To enjoy safety and more pleasant riding, become
throughly familiar with this driver's manual before your ride the motorcycle.throughly familiar with this driver's manual before your ride the motorcycle.
Your safety depends not only on your own alertness and familiarity with the moto-Your safety depends not only on your own alertness and familiarity with the moto-
rcycle but also the motorcycle mechanical condition. A pre-ride inspection beforercycle but also the motorcycle mechanical condition. A pre-ride inspection before
every outing and regular maintenance are essential. the quality of each KYMCO every outing and regular maintenance are essential. the quality of each KYMCO
motorcycle is guaranteed.motorcycle is guaranteed.
Note:1.The information and specifications stated in this manual are for Note:1.The information and specifications stated in this manual are for
reference only and subject to change without notice. reference only and subject to change without notice.
2.When starting the engine, the battery must be installed to facilitate 2.When starting the engine, the battery must be installed to facilitate
Starting and increase the engine performance. Starting and increase the engine performance.
3.Our company reserves the right to make any alteration in the design..If the product 3.Our company reserves the right to make any alteration in the design..If the product
Is not the same as Manual.please according to the actual product.
Is not the same as Manual.please according to the actual product.
We will not notice you again. We will not notice you again.

TABLE OF CONTENTS TABLE OF CONTENTS
1.PRECAUTIONS FOR A SAFE RIDING-------------------------------------1
2.ASSEMBLY PARTS----------------------------------------------------3
3.OPERATION INSTRUCTIONS--------------------------------------------5
IGNITION SWITCH/STEERING&HANDLEBAR LOCK---------------------------5
ELECTRIC STARTER BUTTON.HEADLIGHT SWITCH--------------------------6
HEADLIGHT DIMMER SWITCH-------------------------------------------7
HORN BUTTON/TURN SIGNAL SWITCH------------------------------------7
SEAT LOCK/MET-IN BOX.HELMET BUCKLE--------------------------------8
INSTRUMENTS-------------------------------------------------------9
4.PRE-RIDE INSPECTION----------------------------------------------10
ADVANCE INSPECTION.ENGINE OIL LEVEL INSPECTION/REFILLING---------10
BRAKE INSPECTION.TIRE INSPECTION---------------------------------11
FUEL LEVEL INSPECTION/REFILLING----------------------------------13
STEERING HANDLEBAR.INSTRUMENT LIGHTS INSPECTION------------------14
BRAKE LEVER FREE PLAY INSPECTION&ADJUSTMENT----------------------15
CHOKE KNOB-------------------------------------------------------16
1.PRECAUTIONS FOR A SAFE RIDING-------------------------------------1
2.ASSEMBLY PARTS----------------------------------------------------3
3.OPERATION INSTRUCTIONS--------------------------------------------5
IGNITION SWITCH/STEERING&HANDLEBAR LOCK---------------------------5
ELECTRIC STARTER BUTTON.HEADLIGHT SWITCH--------------------------6
HEADLIGHT DIMMER SWITCH-------------------------------------------7
HORN BUTTON/TURN SIGNAL SWITCH------------------------------------7
SEAT LOCK/MET-IN BOX.HELMET BUCKLE--------------------------------8
INSTRUMENTS-------------------------------------------------------9
4.PRE-RIDE INSPECTION----------------------------------------------10
ADVANCE INSPECTION.ENGINE OIL LEVEL INSPECTION/REFILLING---------10
BRAKE INSPECTION.TIRE INSPECTION---------------------------------11
FUEL LEVEL INSPECTION/REFILLING----------------------------------13
STEERING HANDLEBAR.INSTRUMENT LIGHTS INSPECTION------------------14
BRAKE LEVER FREE PLAY INSPECTION&ADJUSTMENT----------------------15
CHOKE KNOB-------------------------------------------------------16

TABLE OF CONTENTS TABLE OF CONTENTS
5.ENGINE STARTING METHODS----------------------------------------- 18
USE THE ELECTRIC STARTER BUTTON----------------------------------19
START WITH THE KICK LEVER----------------------------------------20
6.NORMAL RIDING METHOD---------------------------------------------21
7.PRECAUTIONS FOR RIDING-------------------------------------------23
8.HOW TO STOP RIDING-----------------------------------------------26
9.EASY MAINTENANCE-------------------------------------------------28
AIR CLEANER INSPECTION AND AIR CLEANER CLEANING&REPLACEMENT------28
BATTERY----------------------------------------------------------30
FUSE CHANGE------------------------------------------------------31
ENGINE OIL CHANGE------------------------------------------------32
SPARK PLUG INSPECTION--------------------------------------------34
10.IMPORTANT NOTICES-----------------------------------------------36
11.EXEXHAUST EMISSION CONTROL SYSTEM------------------------------37
12.POLLUTION-FREE PERIODIC MAINTENANCE SCHEDULE--------------------39
13.SPECIFICATIONS--------------------------------------------------40
5.ENGINE STARTING METHODS----------------------------------------- 18
USE THE ELECTRIC STARTER BUTTON----------------------------------19
START WITH THE KICK LEVER----------------------------------------20
6.NORMAL RIDING METHOD---------------------------------------------21
7.PRECAUTIONS FOR RIDING-------------------------------------------23
8.HOW TO STOP RIDING-----------------------------------------------26
9.EASY MAINTENANCE-------------------------------------------------28
AIR CLEANER INSPECTION AND AIR CLEANER CLEANING&REPLACEMENT------28
BATTERY----------------------------------------------------------30
FUSE CHANGE------------------------------------------------------31
ENGINE OIL CHANGE------------------------------------------------32
SPARK PLUG INSPECTION--------------------------------------------34
10.IMPORTANT NOTICES-----------------------------------------------36
11.EXEXHAUST EMISSION CONTROL SYSTEM------------------------------37
12.POLLUTION-FREE PERIODIC MAINTENANCE SCHEDULE--------------------39
13.SPECIFICATIONS--------------------------------------------------40

①
②
③
④
⌒1⌒⌒1⌒
1.PRECAUTIONS FOR A SAFE RIDING1.PRECAUTIONS FOR A SAFE RIDING
(1) CLOTHES(1) CLOTHES
A motorcycle rider should not wear loose or too long
clothes to avoid danger.
During riding or 10 minutes after the motorcycle is
stopped, do not touch the exhaust muffler to avoid
scalding.
When parking the motorcycle, keep it away from dry
lawn or inflammables to avoid danger.
A motorcycle rider should not wear loose or too long
clothes to avoid danger.
During riding or 10 minutes after the motorcycle is
stopped, do not touch the exhaust muffler to avoid
scalding.
When parking the motorcycle, keep it away from dry
lawn or inflammables to avoid danger.
To relax and wear comfortable clothes are the main To relax and wear comfortable clothes are the main
points for a safe riding. points for a safe riding.
To observe traffic laws, keep a cool mind, relax and be To observe traffic laws, keep a cool mind, relax and be
careful will provide you a safe riding. careful will provide you a safe riding.
Wear helmet and fasten it tightly. Wear helmet and fasten it tightly.
Have the clothes well-arranged. Fasten shirt cuffs and Have the clothes well-arranged. Fasten shirt cuffs and
Keep them from hooking the brake lever. Keep them from hooking the brake lever.
Wear low-heeled shoes for a safe riding. Wear low-heeled shoes for a safe riding.
When riding, use both hands to grasp the handlebar. It When riding, use both hands to grasp the handlebar. It
is very dangerous to hold the handlebar with one hand. is very dangerous to hold the handlebar with one hand.
CAUTION: CAUTION:

The safety of two-wheel vehicles is influenced by sitting
position. The rider should sit on the central part of the
seat cushion. If the rider sits on the rear part of the seat,
the load of front wheel will decrease. As a result, the
handlebar will swing and cause danger to the rider.
When making a turn, it will be easier for the rider to
steer the motorcycle by leaning the body inward slightly.
The motorcycle will lose its balance if the rider fails to
keep his body leaning inward.
When riding on a damaged or macadam road. Slow
down the speed and hold the handlebar tightly.
The safety of two-wheel vehicles is influenced by sitting
position. The rider should sit on the central part of the
seat cushion. If the rider sits on the rear part of the seat,
the load of front wheel will decrease. As a result, the
handlebar will swing and cause danger to the rider.
When making a turn, it will be easier for the rider to
steer the motorcycle by leaning the body inward slightly.
The motorcycle will lose its balance if the rider fails to
keep his body leaning inward.
When riding on a damaged or macadam road. Slow
down the speed and hold the handlebar tightly.
⌒2⌒⌒2⌒
(2) RIDING METHOD(2) RIDING METHOD
(3) CARRYING GOODS(3) CARRYING GOODS
Keep a good sitting posture to operate the motorcycle Keep a good sitting posture to operate the motorcycle
properly. properly.
The feel of the handlebar will be different when carrying The feel of the handlebar will be different when carrying
goods on the motorcycle. Overloading may cause the goods on the motorcycle. Overloading may cause the
handlebar to swing. Avoid riding with overload. handlebar to swing. Avoid riding with overload.
Max. loading capacity of the met-in box is 5kg. Max. loading capacity of the met-in box is 5kg.

2. ASSEMBLY PARTS2. ASSEMBLY PARTS
Rear Brake LeverRear Brake Lever
Taillight/StoplightTaillight/Stoplight
L. Rear Turn Signal Light L. Rear Turn Signal Light
Engine Serial NumherEngine Serial Numher
Main StandMain Stand
Kick LeverKick Lever
Fuel FillerFuel Filler
L. Front Turn Signal LightL. Front Turn Signal Light
Turn Signal SwitchTurn Signal Switch
Headlight Dimmer
Switch
Passing Signal Switch
Horn Button
Headlight Dimmer
Switch
Passing Signal Switch
Horn Button
⌒3⌒⌒3⌒
Met-in BoxMet-in Box

⌒4⌒⌒4⌒
Rear Brake LeverRear Brake Lever
Frame Serial NumberFrame Serial Number
R. Front Turn R. Front Turn
Signal Light Signal Light
Exhaust Muffler Exhaust Muffler
Headlight Switch Headlight Switch
Electric Starter Button Electric Starter Button
R.Rear TurnR.Rear Turn
Signal Light Signal Light
Ignition SwitchIgnition Switch
Rear CarrierRear Carrier
BatteryBattery
InstrumentsInstruments

⌒5⌒⌒5⌒
3. OPERATION INSTRUCTIONS3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
ON : At this position, power is connected to start the ON : At this position, power is connected to start the
engine. The key cannot be taken out. engine. The key cannot be taken out.
OFF : At this position, power is cut off and the engine OFF : At this position, power is cut off and the engine
Stops. The key can be taken out. Stops. The key can be taken out.
LOCK : At this position, the steering handlebar is locked. LOCK : At this position, the steering handlebar is locked.
The key can be taken out The key can be taken out
Locking Method Locking Method
Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the "LOCK" position
,the handlebar can be locked.
Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the "LOCK" position
,the handlebar can be locked.
Unlocking Method Unlocking Method
Turn the ignition switch key right to the"OFF" and the
"LOCK" is released automatically.
Turn the ignition switch key right to the"OFF" and the
"LOCK" is released automatically.
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to the"LOCK" Position
during riding, otherwise the handlebar will be out of
control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to the"LOCK" Position
during riding, otherwise the handlebar will be out of
control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
CAUTION: CAUTION:
ON ON
OFF OFF
LOCK LOCK