Kyocera Iburst utd User manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 1 -

Hirao Yamamoto

Koyama

Designed

Checked

Approved

June

.

08

.2006

Date

1

.01

Revision

Q

38

T

-

EE

-

00

1

Reference

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 2 -

Revision Record

Revision

Author Date Detail

1.00 Hirao May.10.2006 First Release

1.01 Miyasaka June.08.2006 Correct some ritings

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 3 -

CONT NTS

CONT NTS CONT NTS

CONT NTS

Safety Precautions on iBurst Terminal

Safety Precautions on iBurst TerminalSafety Precautions on iBurst Terminal

Safety Precautions on iBurst Terminal................................

................................................................

..........................................

....................

.......... 4

44

4

Chapter 1 Introduction

Chapter 1 IntroductionChapter 1 Introduction

Chapter 1 Introduction ................................

................................................................

..................................

....

.. 8

88

8

Components List

Components ListComponents List

Components List ................................

................................................................

................................................

................................

................ 9

99

9

Pictures of Accessories

Pictures of AccessoriesPictures of Accessories

Pictures of Accessories ................................

................................................................

.......................................

..............

....... 9

99

9

Outlook of iBurst Terminal

Outlook of iBurst TerminalOutlook of iBurst Terminal

Outlook of iBurst Terminal ................................

................................................................

..............................................................

............................................................

.............................. 10

1010

10

Indicators

IndicatorsIndicators

Indicators ................................

................................................................

..........................................................

....................................................

..........................11

1111

11

Requirements on your PC

Requirements on your PCRequirements on your PC

Requirements on your PC ................................

................................................................

................................ 12

1212

12

Outlook to use the iBurst Terminal

Outlook to use the iBurst TerminalOutlook to use the iBurst Terminal

Outlook to use the iBurst Terminal................................

................................................................

..................................................

....................................

.................. 12

1212

12

Chapter 2 Setup Procedure

Chapter 2 Setup ProcedureChapter 2 Setup Procedure

Chapter 2 Setup Procedure................................

................................................................

..........................................................

....................................................

.......................... 13

1313

13

iBurst Software Installation

iBurst Software InstallationiBurst Software Installation

iBurst Software Installation .............................................................................................................. 14

Installation for Windows XP

Installation for Windows XPInstallation for Windows XP

Installation for Windows XP ................................

................................................................

............................................................

........................................................

............................ 14

1414

14

I

II

Installation for Windows 2000

nstallation for Windows 2000nstallation for Windows 2000

nstallation for Windows 2000 ................................

................................................................

.........................................................

..................................................

......................... 17

1717

17

Installation for Windows Me

Installation for Windows MeInstallation for Windows Me

Installation for Windows Me ................................

................................................................

............................................................

........................................................

............................ 20

2020

20

Installation for Windows 98S

Installation for Windows 98SInstallation for Windows 98S

Installation for Windows 98S ................................

................................................................

.........................................................

..................................................

......................... 39

3939

39

Installation for Mac OS X

Installation for Mac OS XInstallation for Mac OS X

Installation for Mac OS X................................

................................................................

.................................

..

. 59

5959

59

Connection stablishment

Connection stablishmentConnection stablishment

Connection stablishment ................................................................................................................. 63

Connection stablishment for Windows XP

Connection stablishment for Windows XPConnection stablishment for Windows XP

Connection stablishment for Windows XP ................................

................................................................

.....................................

..........

..... 63

6363

63

Connection stablishment for Windows 2000/Me/98S

Connection stablishment for Windows 2000/Me/98SConnection stablishment for Windows 2000/Me/98S

Connection stablishment for Windows 2000/Me/98S ................................

................................................................

...................................................

......................................

................... 68

6868

68

Connection stablishment for Mac OS X

Connection stablishment for Mac OS XConnection stablishment for Mac OS X

Connection stablishment for Mac OS X ................................

................................................................

.........................................

..................

......... 70

7070

70

Chapter 3 Utility Software

Chapter 3 Utility SoftwareChapter 3 Utility Software

Chapter 3 Utility Software ................................

................................................................

..........................................................

....................................................

.......................... 74

7474

74

Using Utility Software

Using Utility SoftwareUsing Utility Software

Using Utility Software........................................................................................................................ 75

Using Utility Software for Windows

Using Utility Software for WindowsUsing Utility Software for Windows

Using Utility Software for Windows................................

................................................................

.................................................

..................................

................. 75

7575

75

Using Utility Software for Mac OS X

Using Utility Software for Mac OS XUsing Utility Software for Mac OS X

Using Utility Software for Mac OS X ................................

................................................................

...............................................

..............................

............... 81

8181

81

Status Indication over thernet

Status Indication over thernetStatus Indication over thernet

Status Indication over thernet ........................................................................................................ 88

Chapter 4 MTU Optimizer Software & Network Property

Chapter 4 MTU Optimizer Software & Network PropertyChapter 4 MTU Optimizer Software & Network Property

Chapter 4 MTU Optimizer Software & Network Property ................................

................................................................

..........................................

....................

.......... 93

9393

93

MTU Optimizer Software & Network Property

MTU Optimizer Software & Network PropertyMTU Optimizer Software & Network Property

MTU Optimizer Software & Network Property................................................................................ 94

Chapter 5 Uninstal

Chapter 5 UninstalChapter 5 Uninstal

Chapter 5 Uninstallation

lationlation

lation................................

................................................................

.............................................................

..........................................................

............................. 97

9797

97

iBusrt Software Uninstallation

iBusrt Software UninstallationiBusrt Software Uninstallation

iBusrt Software Uninstallation.......................................................................................................... 98

Uninstallation for Windows XP/2000

Uninstallation for Windows XP/2000Uninstallation for Windows XP/2000

Uninstallation for Windows XP/2000 ................................

................................................................

...............................................

..............................

............... 98

9898

98

Uninstallation for Windows Me/98S

Uninstallation for Windows Me/98SUninstallation for Windows Me/98S

Uninstallation for Windows Me/98S ................................

................................................................

.............................................

..........................

.............101

101101

101

Uninstallation for Mac OS X

Uninstallation for Mac OS XUninstallation for Mac OS X

Uninstallation for Mac OS X ................................

................................................................

...........................................................

......................................................

...........................108

108108

108

Chapter 6 Trouble shooting

Chapter 6 Trouble shootingChapter 6 Trouble shooting

Chapter 6 Trouble shooting................................

................................................................

.........................................................

..................................................

.........................110

110110

110

Windows

WindowsWindows

Windows..............................................................................................................................................111

USB connection with Windows Me/98S

USB connection with Windows Me/98SUSB connection with Windows Me/98S

USB connection with Windows Me/98S ................................

................................................................

........................................

................

........ 111

111111

111

Illegal hang

Illegal hangIllegal hang

Illegal hang-

--

-up when

up whenup when

up when install iBurst Terminal.

install iBurst Terminal. install iBurst Terminal.

install iBurst Terminal. ................................

................................................................

................................ 114

114114

114

Illegal hang

Illegal hangIllegal hang

Illegal hang-

--

-up when set up dialer

up when set up dialerup when set up dialer

up when set up dialer................................

................................................................

..................................................

....................................

..................116

116116

116

PC hang

PC hangPC hang

PC hang-

--

-up when eject iBurst Terminal from Win98 USB port.

up when eject iBurst Terminal from Win98 USB port.up when eject iBurst Terminal from Win98 USB port.

up when eject iBurst Terminal from Win98 USB port. ................................

................................................................

.....................................

..........

..... 118

118118

118

Mac

MacMac

Mac ..................................................................................................................................................... 119

Data rate

Data rateData rate

Data rate................................

................................................................

.........................................................

..................................................

......................... 119

119119

119

Chapter 7 Information

Chapter 7 InformationChapter 7 Information

Chapter 7 Information ................................

................................................................

...............................................................

..............................................................

............................... 120

120120

120

FCC Compliance Statement

FCC Compliance StatementFCC Compliance Statement

FCC Compliance Statement............................................................................................................. 121

FCC RF Radiation xposure Statement

FCC RF Radiation xposure StatementFCC RF Radiation xposure Statement

FCC RF Radiation xposure Statement ......................................................................................... 121

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 4 -

Safety Precautions on iBurst Terminal

Safety Precautions on iBurst TerminalSafety Precautions on iBurst Terminal

Safety Precautions on iBurst Terminal

• Things you must know

• When using the product, use it correctly according to the safety precautions.

• The product uses particular radio frequency band tuned for the network operator.

• The safety precautions, hardware, software, and the design of the product may be changed

in the future without any announcement to the customers.

• About use restriction

• The product is designed as an OA apparatus for home use. Please use it neither in the

medical apparatus directly to affect a human life, nor the system of which very high

reliability is required.

• Do not use the product in the zone where the wireless machines are forbidden, such as an

airplane and a hospital. An electric device and medical apparatus are affected and it

becomes the cause of the accident.

• About Qualification

• Our company does not take any responsibility about the damage produced by use under

the conditions such as natural disasters, earthquake, flood, fires, misuse by intent or

carelessness or other than the responsibility of our company.

• Our company does not take any responsibility about the damage produced by external

factor, failure, malfunction, and fault of product, such as loss of enterprise profits,

enterprise discontinuation, change and disappearance of the contents of memory etc.

• Our company takes no responsibility about the damage produced by not keeping the

written contents of an owner's manual.

• Our company takes no responsibility about the damage produced from incorrect operation

in combination with the connection apparatus and software in which our company is not

participating etc.

• iBurst ™ is a registered trademark of ArrayComm, Inc.

• Mac OS X is a registered trademark of Apple Computer, Inc.

• Windows is a registered trademark of Microsoft Corporation.

• In addition, the name of the software carried in this document and peripheral equipment is

each company’s trademark, or a registered trademark.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 5 -

• For your safety

-------- Danger

Danger Danger

Danger --------

----------------

--------

( If used improperly, may cause death or serious injury. )

• Do not use with an abnormal condition, such as with emission of smoke or odor. It may

cause fire or electric shock.

• Do not insert metal or flammable materials into the product interior through the air vents.

Pull out power plug from the outlet in case that foreign material into the product interior.

It may cause fire or electric shock.

• Do not disassemble or remodel the product. It may cause fire or electrical shock.

• Do not use or place the product at places with high humidity such as in the bath room or

near the humidifier. It may cause fire or electric shock. And do not touch the product with

wet hands.

• Do not use the product with power supply other than AC100 to 240V. It may cause fire or

electric shock.

• Do not plug too many leads into a single socket with extensions such as table taps, divided

outlets, and divided sockets. It may cause fire or electric shock. Moreover, make sure that

the total current does not exceed the capacity of the power supply. Otherwise, may cause

fire or electrical shock.

• Do not damage, break, modify, bend, pull, twist, or bundle the AC cord. In addition, if a

heavy material is placed onto the cord or it is heated, the cord may break and cause fire or

electric shock.

• Securely insert the plug into the outlet. If a metal object edges the teeth of the plug, it may

cause fire or electric shock. When pulling out the plug from the outlet, be sure to hold onto

its head. Pulling the cord can damage itself.

• When you change the installation place of the product, pull out the plug from the outlet

and confirm that PC is completely separated from it. Otherwise, the cord may be damaged

and cause electric shock or fire.

• Before inserting the plug into the outlet, check that there is no dust on its edge and head.

As dusts can easily enter between the plug and the outlet, they may cause fire or electric

shock. Pull out the plug from the outlet, at least once in a half year or a year, and

clean/maintenance.

• Use the AC/DC adapter enclosed with the product. Usage of other AC/DC adapters may

cause fire or electric shock.

• Do not place things or put cloth on the top of the plug. It may heat and break the plastic

and/or the rubber, causing fire or electric shock.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 6 -

------- Warning

Warning Warning

Warning --------

----------------

--------

( If used improperly, may cause disability or physical damage. )

• Do not give a shock strong against the product, such as dropping and throwing. It becomes

the cause of failure. Moreover, do not ride on the product. It may become the cause of an

injury.

• Do not put the product under direct sunshine or near equipment with high temperature

such as a stove and a heater. It may raise the temperature of the interior and cause fire.

• Do not put the product at places with an extreme fluctuation of temperature, such as near

the air conditioner or a heater. The dew condensation may occur in the interior and cause

fire, electrical shock, and malfunction.

• Do not put the product at places with oil and steams such as in the kitchen. In addition, do

not put it at dusty places and places where metal powder and toxic gas occur. It may cause

fire or electric shock.

• Do not place the product on unstable places such as on an unsteady desk or slanted

surfaces. In addition, do not put any object on the product. It may loose balance and

tumble, or fall and cause injury.

• When the thunder occurs in near, do not use the product and its peripheral equipment. It

may become the cause of an electric shock.

• If the air vents are blocked, the interior may be heated and cause malfunction. Please do

not use the products in the following manners;

Put on carpet or bedclothes.

Cover with tablecloths.

Put at places with bad ventilation, such as on a book shelf, in the drawer, or in the

closet.

• If suspending the use for a long time, pull out the plug from the outlet.

• Do not use the AC cord with an extension cord. It may cause fire.

• For maintenance, pull out the AC plug from the outlet for safety. Do not wipe the product

with benzene, thinner, or alcohol. It may cause the product to decolorize or deform. If the

product be stained, put some neutral detergent on a dry cloth and wipe gently.

• Do not connect electricity supplied LAN cable to the product. It may cause smoke or fire.

• Do not touch the connector pins directly with your hands. Static electricity may affect the

components. As static electricity is created from both the cloth and the human body, before

putting or removing the product, release static electricity by touching a metal object such

as a small cabinet.

• Do not use it in the intense place of vibration. It becomes the cause of failure.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 7 -

-------- Caution

CautionCaution

Caution --------

( If treated improperly, the equipment may not perform or work properly. )

• Do not put the product at low temperature. The product may not function properly.

• Do not put the product on the top of magnetic objects and places where electromagnetic

waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV,

radio, fluorescent light, inverter air conditioner, and electric kitchen appliances). The

product will not be able to make communication properly if effected by magnetism or

electronic noise. Putting the product near TV or radio may cause RF receive error.

• The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot

spring.

• Data communication will be disabled or a data file may corrupt if the PC is turned off or

the product is separated from the PC during the communication. Important data must be

verified against the original data.

• For fixing the product, use the enclosed fixture.

• When connecting the product onto PC, use the enclosed USB cable or LAN cable.

• Both a USB and an thernet interface cannot be used simultaneously in case a UTD

model.

• When using UTD model, Please put the antenna at vertical position as shown in the below

diagrams so that the unit could acquire proper antenna characteristics.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 8 -

Chapter 1 Introduction

Chapter 1 IntroductionChapter 1 Introduction

Chapter 1 Introduction

7

This chapter

This chapter This chapter

This chapter describes what shoul

describes what shouldescribes what shoul

describes what should be confirmed

d be confirmed d be confirmed

d be confirmed before

before before

before

using iBurst

using iBurst using iBurst

using iBurst Terminal

TerminalTerminal

Terminal.

..

.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 9 -

Components List

Components List Components List

Components List

The table below shows the list of components. Please confirm items in the package.

UTD model

Component

ComponentComponent

Component

Notes

NotesNotes

Notes

Q’

Q’Q’

Q’ty

tyty

ty

iBurst Terminal Unit of UTD model

Refer to the pictures shown in next page.

1

AC/DC Adapter Input: 100 - 240V AC/ 50 - 60Hz/ 300mA

Output: 9V DC/ 1.2A

Cable Length of output side: 2m

1

Power Cable Length: 2m 1

USB Cable Type: USB1.1

Length: 1m

1

10-Base-T thernet Cable Type: Straight through/ Category 5

Length: 2m

1

UTU model

Component

ComponentComponent

Component

Notes

NotesNotes

Notes

Q’

Q’Q’

Q’ty

tyty

ty

iBurst Terminal Unit of UTU model

Refer to the pictures shown in next page.

1

USB Cable Type: USB1.1 (Mini B for UTU side)

Length: 1m

1

Pictures o Accessories

AC/DC Adapter

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 10 -

Outlook of iBurst Terminal

Outlook of iBurst Terminal Outlook of iBurst Terminal

Outlook of iBurst Terminal

UTD model

USB port

10Base-T port

only on UTD model

Back side view

Antenna

Power Indicator

Link/Communication Indicator

PC Connection Indicator

DC Power Input

Power switch

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 11 -

Indicator

IndicatorIndicator

Indicators

s s

s

The table below describes meaning of each indicator.

Indicator State Meaning

Power Indicator OFF Turned OFF

Blue Turned ON

Blinking

Fault

Link/Communication Indicator OFF Turned OFF

Amber No signal receiving

Yellow Weak signal receiving

Blinking when communicating.

Green Strong signal receiving

Blinking when communicating.

PC Connection Indicator OFF Any port not active

(Only on UTD model) Amber USB port

Green 10Base-T port

UTU model

USB port

External antenna port

Power Indicator

Link/Communication Indicator

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 12 -

Requirements on your PC

Requirements on your PCRequirements on your PC

Requirements on your PC

• PC/AT Compatible PC with WindowsXP/2000/Me/98S ; or

version 10.1.5 or later version of Mac OS X except Mac Intel model.

• 1 USB1.1 port or a later version of USB port.

NOTE: In case of using USB connection.

• 1 10Base-T thernet port or compatible.

NOTE: In case of using 10Base-T thernet connection with a UTD model.

Outlook to use the iBurst Terminal

Outlook to use the iBurst Terminal Outlook to use the iBurst Terminal

Outlook to use the iBurst Terminal

A UTD model has 1 USB port and 1 10Base-T thernet port and a UTU model has only 1 USB port.

The USB port, or 10Base-T thernet port, shall be connected with your PC. Before connecting the

USB interface, you have to install iBurst software which includes device drivers. If you want to

utilize 10Base-T connection, you don’t have to install the software in case Windows XP or Mac OS

X. Please read through every sections related with the operating system for details.

USB Connection

10Base-T Ethernet Connection

USB port

Back side o UTD

10Base

-

T port

USB Cable

Category 5 Cable

(Straight cable)

UTU

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 13 -

Chapter 2 Setup Procedure

Chapter 2 Setup ProcedureChapter 2 Setup Procedure

Chapter 2 Setup Procedure

Thi

ThiThi

This chapter describes how to install

s chapter describes how to install s chapter describes how to install

s chapter describes how to install iBurst software,

iBurst software,iBurst software,

iBurst software, then

then then

then

guides you how to make a network connection so as to use

guides you how to make a network connection so as to use guides you how to make a network connection so as to use

guides you how to make a network connection so as to use

data communication service.

data communication service.data communication service.

data communication service.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 14 -

iBurst Software Installatio

iBurst Software InstallatioiBurst Software Installatio

iBurst Software Installation

n n

n

This section shows the procedure to install iBurst software on your PC for utilizing iBurst

Terminal. The procedure shall be done once before using it.

Installati

InstallatiInstallati

Installation for Windows XP

on for Windows XPon for Windows XP

on for Windows XP

NOTE:

If you are going to connect the iBurst Terminal with your PC only through an thernet cable, not

through a USB cable, you don’t need to install/uninstall any iBurst software. In such case, you

can skip this section and you need only to create a dial-up connection setting described at from

page 62. You can see indications of the iBurst Terminal over thernet. See page 87 for the

method.

1. Make sure to disconnect the iBurst Terminal with your PC.

ATTENTION:

Don

DonDon

Don’

’’

’t connect the iBurst Terminal with your PC through a USB cable until completion of

t connect the iBurst Terminal with your PC through a USB cable until completion of t connect the iBurst Terminal with your PC through a USB cable until completion of

t connect the iBurst Terminal with your PC through a USB cable until completion of

installation.

installation.installation.

installation.

2. Turn your PC on.

3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or

execute the appropriate installation software.

4. iBurst Terminal Setup starts. Click the [Next >] button.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 15 -

5. Select [I accept the terms the license agreement], click the [Next >] button.

6. Click the [Next >] button after appearing dialog window as shown below.

NOTE: To install to a different folder, click [Browse…] and specify another folder.

7. Click the [Next >] button.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 16 -

8. The following dialog window will appear, and installation of software begins.

9. When the installing process finishes, the dialog window shown below will appear. Select “Yes, I

want to restart my computer now” and click the [Finish] button in the dialog window.

10. After finish of restarting, connect the iBurst Terminal with your PC’s USB port.

The iBurst Terminal will be recognized and will be ready to use automatically.

NOTE: If the PC request to restart again, click [Yes] to restart the PC.

NOTE: To connect to the Internet, refer to page 62.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 17 -

Installation for Windows 2000

Installation for Windows 2000Installation for Windows 2000

Installation for Windows 2000

1. Make sure to disconnect the iBurst Terminal with your PC.

ATTENTION:

Don

DonDon

Don’

’’

’t connect the iBurst Terminal with your PC through a USB cable until completion of

t connect the iBurst Terminal with your PC through a USB cable until completion of t connect the iBurst Terminal with your PC through a USB cable until completion of

t connect the iBurst Terminal with your PC through a USB cable until completion of

installation.

installation.installation.

installation.

2. Turn your PC on.

3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or

execute the appropriate installation software.

4. iBurst Terminal Setup starts. Click the [Next >] button.

5. Select [I accept the terms the license agreement], click the [Next >] button.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 18 -

6. Click the [Next >] button after appearing dialog window as shown below.

NOTE: To install to a different folder, click [Browse…] and specify another folder.

7. Click the [Next >] button.

8. The following dialog window will appear, and installation of software begins.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 19 -

9. When the installing process finishes, the dialog window shown below will appear. Select [Yes, I

want to restart my computer now] and click the [Finish] button in the dialog window.

10. After finish of restarting, connect the iBurst Terminal with your PC’s USB port.

The iBurst Terminal will be recognized and will be ready to use automatically.

NOTE: If the PC request to restart again, click [Yes] to restart the PC.

NOTE: To connect to the Internet, refer to page 67.

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 20 -

Installation for Windows M

Installation for Windows MInstallation for Windows M

Installation for Windows Me

e e

e

Since t

Since tSince t

Since the installation disk of

he installation disk of he installation disk of

he installation disk of Windows Me

Windows MeWindows Me

Windows Me

may

maymay

may b

b b

be

e e

e required while

required while required while

required while driver installation, please

driver installation, please driver installation, please

driver installation, please

prepare

prepare prepare

prepare the CD or copy the

the CD or copy the the CD or copy the

the CD or copy the CD

CDCD

CD

into

intointo

into a hard disk in your PC

a hard disk in your PC a hard disk in your PC

a hard disk in your PC for it.

for it.for it.

for it.

1. Make sure to disconnect the iBurst Terminal with your PC.

ATTENTION:

Don

DonDon

Don’

’’

’t connect the iBurs

t connect the iBurst connect the iBurs

t connect the iBurst Terminal with your PC through a USB cable until completion of

t Terminal with your PC through a USB cable until completion of t Terminal with your PC through a USB cable until completion of

t Terminal with your PC through a USB cable until completion of

installation.

installation.installation.

installation.

2. Turn your PC on.

3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or

execute the appropriate installation software.

4. iBurst Terminal Setup starts. Click the [Next >] button.

5. Select [I accept the terms the license agreement], click the [Next >] button.

Kyocera iBurst UTD User manual

Popular Touch Terminal manuals by other brands