Kyocera iBurst UTD User manual

iBurst Terminal Desktop Type(UTD) Manual
- 1 -

iBurst Terminal Desktop Type(UTD) Manual
CONTENTS
Safety Precautions on iBurst Terminal ...........................................................................3
Chapter 1 Contents of the package..................................................................................7
Components list...................................................................................................................................8
Chapter 2 Setup Procedure..............................................................................................9
iBurst Software Installation.............................................................................................................10
Installation for Windows XP .........................................................................................................10
Installation for Windows 2000 ......................................................................................................14
Installation for Windows Me.........................................................................................................17
Installation for Windows 98SE .....................................................................................................36
Installation for Mac OS X..............................................................................................................55
Connection Establishment................................................................................................................58
Connection Establishment for Windows XP.................................................................................58
Connection Establishment for Windows 2000/Me/98SE..............................................................63
Connection Establishment for Mac OS X .....................................................................................64
Chapter 3 Utility Software ............................................................................................68
Using Utility Software ......................................................................................................................69
Using Utility Software for Windows.............................................................................................69
Using Utility Software for Mac OS X ...........................................................................................75
Chapter 4 MTU Optimizer Software & Network Property ...........................................82
MTU Optimizer Software & Network Property...............................................................................83
Chapter 5 Uninstallation...............................................................................................86
iBusrt Software Uninstallation ........................................................................................................87
Uninstallation for Windows XP/2000............................................................................................87
Uninstallation for Windows Me/98SE ..........................................................................................90
Uninstallation for Mac OS X.........................................................................................................98
Chapter 6 Trouble shooting ......................................................................................... 100
Windows...........................................................................................................................................101
USB connection with Windows Me. ............................................................................................101
USB connection with Windows 98SE .........................................................................................104
Illegal hang-up when install iBurst Terminal............................................................................107
Illegal hang-up when set up dialler ............................................................................................109
PC hang-up when eject iBurst Terminal from Win98 USB port. .............................................. 111
Mac...................................................................................................................................................112
Data rate ......................................................................................................................................112
- 2 -

iBurst Terminal Desktop Type(UTD) Manual
Safety Precautions on iBurst Terminal
● Things you must know
・ When using this product, use it correctly according to the safety precautions.
・ The specification of this product has become 1.9GHz frequency bands. It cannot use on the
other frequency.
・ The safety precautions, hardware, software, and the design of the product may change in
the future without any announcement to the customers.
● About use restriction
・ This product is designed as OA apparatus for home use. Please use it neither in the
medical apparatus directly to affect a human life, nor the system of which very high
reliability is required.
・ Don’t use this product in the zone where the wireless machines are forbidden, such as an
airplane and a hospital. An electric device and medical apparatus are affected and it
becomes the cause of the accident.
●About Qualification
・ Our company does not take any responsibility about the damage produced by use under
the following conditions. Natural disasters, such as an earthquake and flood damage, fires,
other than the responsibility of our company, misuse by intent or carelessness.
・ Our company does not take any responsibility about the damage produced by external
factor, failure, malfunction, and fault of product. It may cause the loss of enterprise profits,
enterprise discontinuation, change and disappearance of the contents of memory etc.
・ Our company takes no responsibility about the damage produced by not keeping the
written contents of an owner's manual.
・ Our company takes no responsibility about the damage produced from incorrect operation
in combination with the connection apparatus and software in which our company is not
participating etc.
・iBurst TM is registered trademark of ArrayComm, Inc.
・Mac OS is registered trademark of Apple Computer, Inc.
・Windows is the registered trademark of Microsoft Corporation.
・In addition, the name of the software carried in this document and peripheral equipment is each
maker’s trademark, or a registered trademark.
- 3 -

iBurst Terminal Desktop Type(UTD) Manual
● For your safety
―― Danger ――
( If used improperly, may cause death or serious injury. )
・ Do not use with an abnormal condition, such as with emission of smoke or odor. It may
cause fire or electric shock.
・ Do not insert metal or flammable materials into the product interior through the air vents.
Pull out power plug from the outlet in case that foreign material into the product interior. It
may cause fire or electric shock.
・ Do not disassemble or remodel this product. It may cause fire or electrical shock.
・ Do not use or place the product at places with high humidity such as in the bath room or
near the humidifier. It may cause fire or electric shock. And do not touch the product with
wet hands.
・ Do not use the product with power supply other than AC100~240V. It may cause fire or
electric shock.
・ Don't plug too many leads into a single socket with extensions such as table taps, divided
outlets, and divided sockets. It may cause fire or electric shock. Moreover, make sure that
the total current does not exceed the capacity of the power supply. Otherwise, may cause
fire or electrical shock.
・ Don’t damage, break, modify, bend, pull, twist, or bundle the AC cord. In addition, if a
heavy material is placed onto the cord or it is heated, the cord may break and cause fire or
electric shock.
・ Securely insert the plug into the outlet. If a metal object edges the teeth of the plug, it may
cause fire or electric shock. When pulling out the plug from the outlet, be sure to hold onto
its head. Pulling the cord can damage itself.
・ When you change the installation place of this product, pull out the plug from the outlet
and confirm that PC is completely separated from it. Otherwise, the cord may be damaged
and cause electric shock or fire.
・ Before inserting the plug into the outlet, check that there is no dust on its edge and head.
As dusts can easily enter between the plug and the outlet, they may cause fire or electric
shock. Pull out the plug from the outlet, at least once in a half year or a year, and
clean/maintenance.
・ Use the AC/DC adapter enclosed with the product. Usage of other AC/DC adapters may
cause fire or electric shock.
・ Do not place things or put cloth on the top of the plug. It may heat and break the plastic
and/or the rubber, causing fire or electric shock.
- 4 -

iBurst Terminal Desktop Type(UTD) Manual
――Warning ――
( If used improperly, may cause disability or physical damage. )
・ Do not give a shock strong against this product, such as dropping and throwing. It becomes
the cause of failure. Moreover, do not ride on this product. It may become the cause of an
injury when a case is damaged.
・ Do not put the product under direct sunshine or near equipment with high temperature
such as stove and heater. It may raise the temperature of the interior and cause fire.
・ Do not put the product at places with an extreme fluctuation of temperature, such as near
the air conditioner or a heater. The dew condensation may occur in the interior and cause
fire, electrical shock, and malfunction.
・ Do not put the product at places with oil and steams such as in the kitchen. In addition, do
not put it at dusty places and places where metal powder and toxic gas occur. It may cause
fire or electric shock.
・ Do not place the product on unstable places such as on an unsteady desk or slanted
surfaces. In addition, do not put object on the product. It may loose balance and tumble, or
fall and cause injury.
・ When the thunder occurs in near, do not use this product and its peripheral equipment. It
may become the cause of an electric shock.
・ If the air vents are blocked, the interior may be heated and cause malfunction. Please do
not use the products in the following manners;
Put on carpet or bedclothes.
Cover with tablecloths.
Put at places with bad ventilation, such as on a book shelf, in the drawer, or in the
closet.
・ If suspending the use for a long time, pull out the plug from the outlet.
・ Don’t use the AC cord with an extension cord. It may cause fire.
・ For maintenance, pull out the AC plug from the outlet for safety. Do not wipe the product
with benzene, thinner, or alcohol. It may cause the product to decolorize or deform. If the
product be stained, put some neutral detergent on a dry cloth and wipe gently.
・ Do not connect electricity supplied LAN cable to the product. It may cause smoke or fire.
・ Do not touch the connector pins directly with your hands. Static electricity may affect the
components. As static electricity is created from both the cloth and the human body, before
putting or removing the product, release static electricity by touching a metal object such
as a small cabinet.
・ Do not use it in the intense place of vibration. It becomes the cause of failure.
- 5 -

iBurst Terminal Desktop Type(UTD) Manual
―― Caution ――
( If treated improperly, the equipment may not perform or work properly. )
・ Do not put the product at low temperature. The product may not function properly.
・ Do not put the product on the top of magnetic obejects and places where electromagnetic
waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV,
radio, fluorescent light, inverter air conditioner, and electric kitchen appliances).
The product will not be able to make communication properly if effected by magnetism or
electronic noise. Putting the product near TV or radio may cause RF receive error.
・ The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot
spring.
・ Data communication will be disabled or a data file may corrupt if the PC is turned off or
the product is separated from the PC during the communication. Important data must be
verified against the original data.
・ For fixing the product, use the enclosed fixture.
・ When connecting the product onto PC, use the enclosed USB cable or LAN cable.
・ A USB and an Ethernet interface cannot be used simultaneously.
- 6 -

iBurst Terminal Desktop Type(UTD) Manual
- 7 -
Chapter 1 Contents of the package
This chapter describes contents of the package.

iBurst Terminal Desktop Type(UTD) Manual
Components list
The following table is components list.
Table. 1 Components list
Item Component Spec Q’TY
1 UT Desktop (Set Assy.) Dimensions: 39mm (W) x 186mm (H) x 132mm (L)
Weight: Approx. 310g (Without AC/DC Adapter)
Power consumption: Max 6W
1
2 Stand Assy. Dimensions: 90mm(W) x 9mm(H) x 129mm(L) 1
3 AC/DC Adapter Input: 100 - 240V AC/ 50 - 60Hz/ 300mA
Output: 9V DC/ 1.2A
Cable Length: 2m
1
4 AC Cord Length: 2m 1
5 LAN Cable Type: Straight through/ Category 5
Length: 2m
1
6 USB Cable Type: USB1.1
Length: 2m
1
7 Wall Screw Cross Slot Screw 2
- 8 -

iBurst Terminal Desktop Type(UTD) Manual
- 9 -
Chapter 2 Setup Procedure
This chapter describes how to install iBurst software, then
guides you how to make a network connection so as to use
data communication service.

iBurst Terminal Desktop Type(UTD) Manual
iBurst Software Installation
It is necessary to run iBurst software installation only when iBurst Terminal is to be used on your
personal computer the first time. Once it has been installed, there is no necessity for this
installation operation from the next connection.
Installation for Windows XP
1 Turn on the power to the computer.
2 Insert the provided Software Utility CD into your CD-ROM drive.
Don’t insert iBurst Terminal into your PC’s USB port when installation is running.
3 iBurst Setup starts, click the [Next >] button.
4 Select [I accept the terms the license agreement], click the [Next >] button.
- 10 -

iBurst Terminal Desktop Type(UTD) Manual
5 Click the [Next >] button after appearing dialog window as shown below.
6 Click the [Next >] button.
7 The following dialog window will appear, and installation of software begins.
- 11 -

iBurst Terminal Desktop Type(UTD) Manual
8 When the installing process finishes, the dialog window shown below will appear. Select “Yes, I
want to restart my computer now” and click the [Finish] button in the dialog window.
9 After the restart, insert iBurst Terminal into your PC’s USB port.
10 If the operating system is able to recognize the inserted iBurst Terminal as a new installed
hardware, [Found New Hardware Wizard] will begin and the dialog window as shown below
will appear. Select [Install the software automatically(Recommended)] and click the [Next >]
button in the dialog window.
- 12 -

iBurst Terminal Desktop Type(UTD) Manual
11 The driver is installed on your PC.
12 After installation of the driver, the dialog window shown below will appear, click the [Finish]
button.
- 13 -

iBurst Terminal Desktop Type(UTD) Manual
Installation for Windows 2000
1 Turn on the power to the computer.
2 Insert the provided Software Utility CD into your CD-ROM drive.
Don’t insert iBurst Terminal into your PC’s USB port when installation is running.
3 iBurst Setup starts, click the [Next >] button.
4 Select [I accept the terms the license agreement], click the [Next >] button.
- 14 -

iBurst Terminal Desktop Type(UTD) Manual
5 Click the [Next >] button after appearing dialog window as shown below.
6 Click the [Next >] button.
7 The following dialog window will appear, and installation of software begins.
- 15 -

iBurst Terminal Desktop Type(UTD) Manual
8 When the installing process finishes, the dialog window shown below will appear. Select [Yes, I
want to restart my computer now] and click the [Finish] button in the dialog window.
9 After the restart, insert iBurst Terminal into your PC’s USB port.
- 16 -

iBurst Terminal Desktop Type(UTD) Manual
Installation for Windows Me
1 Turn on the power to the computer.
2 Insert the provided Software Utility CD into your CD-ROM drive.
Don't insert iBurst Terminal into your PC’s USB port when installation is running.
3 iBurst Setup starts, click the [Next >] button.
4 Select [I accept the terms the license agreement], click the [Next >] button.
- 17 -

iBurst Terminal Desktop Type(UTD) Manual
5 Click the [Next >] button after appearing dialog window as shown below.
6 Click the [Next >] button.
7 The following dialog window will appear, and installation of software begins.
- 18 -

iBurst Terminal Desktop Type(UTD) Manual
8 Click the [Finish] button.
9 Click the [OK] button.
10 After software installation is finished, insert iBurst Terminal into your PC’s USB port.
11 If the operating system is able to recognize the inserted iBurst Terminal as a new installed
hardware, [Add New Hardware Wizard] will begin and the dialog window as shown below will
appear. Select [Specify the location of the driver (Advanced)] and click the [Next >] button in the
dialog window.
- 19 -

iBurst Terminal Desktop Type(UTD) Manual
12 Select [Search for the best driver for your device.(Recommended)], then check [Specify a
location] and click the [Browse] button.
13 Select [C:¥Program Files¥iBurst Terminal¥bin], and click the [OK] button.
- 20 -