KYORITSU KEW Smart User manual

KEW Smart for KEW3552BT
Instruction manual
How to connect with KEW3552BT
Connection and Disconnection
Connect KEW 3552 BT with your PC: P.2
Disconnection P.6
Data saving
How to save the measured data
P.8
Items shown in the Saved data list P.10
Auto-save P.11
Creating/ editing files
Menu P.13
Creating a new file P.15
To show another file P.18
Editing the saved data
Add/ alter file descriptions P.19
Edit comments on records P.20
Deleting the saved data
Delete one record. P.22
Select and delete multiple records P.24
Delete all records P.27
Download all data from KEW 3552 BT P.28
Delete all the KEW 3552 BT internal data P.29
Other features
Show the saved data P.31
Open a map based on the location info. P.32
Display layout change P.33
Link with other apps P.35
File transfer to PC
On Android device: P.36
On iOS device: P.37
Troubleshooting
P.38
Management of KEW 3552 BT internal memory
1

Connection and Disconnection
Operating environment
System requirements:
・OS
・Android "5.0" to "7.0"
・iOS
"10.0.0"
or later
・Devices:
・Smartphone
・Tablet
・Required functions/ authorizations:
・Bluetooth LE
・Location services
・File writing/ reading
Android is a trademark or registered trademark of Google Inc.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries.
The Android robot is reproduced or modified from work created and shared by
Google and used according to terms described in the Creative Commons 3.0
Attribution License.
iOS
2

Connection and Disconnection
Connect KEW 3552 BT with your PC:
STEP 1
Power on KEW 3552 BT
1Turn the Function switch and select any desired range.
* Please refer to the instruction manual for KEW 3552 BT for details.
Function switch
STEP 2
1
Open “Settings” on your device.
CAUTION: Setting application depends on the device you’re using.
For details, please refer to the manual of the device you’re using.
2Turn on the Bluetooth function.
3Turn on the location services.
iOS
Privacy > Location Services
STEP 3
Start “KEW Smart for KEW 3552 BT”.
1
Tap the icon and get the application started.
←App icon for “KEW Smart for KEW 3552 BT”
Turn on the necessary functions on your device. (If those have been turned
off.)
Follow the procedures below and turn on the required functions mentioned above; if any of them
are off.You can proceed to STEP 3 if all the functions are “On”.
3

Connection and Disconnection
STEP 4
Verify that the access is authorized. (required only for the first time)
This authorization check is required when:
- the settings or data of the application is restored to default, or
- the app is re-installed.
If the access right has been already confirmed, you can proceed to STEP 5.
1Several authorization checks are performed when the app gets started. Select Allow for all.
Android
Access to files:
Access to device location:
iOS
Location Services:
* This confirmation message appears just once before shifting to the setting screen.
Don't Allow Allow
Access authorization required to use Bluetooth LE
function and to add and save data with location info.
Authorization required to use Bluetooth LE function and
to add location info. to the saved data.
Access authorization required to save/ read measured
data.
4

Connection and Disconnection
STEP 5
Search KEW 3552 BT you want to connect:
1Tap the Search button to search KEW 3552 BT in close proximity.
Begins searching…
2Select the target KEW 3552 BT from the list shown in the app.
* Serial no. is marked on the rear side of the product.
Tap the Serial No. to cancel the
selection.
Founded KEW 3552 BT is/ are
listed and shown in the app.
5

Connection and Disconnection
STEP 6
Connection
1Tap the button to establish connection.
Begins connection…
2Confirm that the connection has been successfully established.
Disconnect button appears. Connect button appears.
Displayed message: Displayed message:
Connected to "KEW3552BT-xxxxxxxx"
Connection error
Connected:
Filed:
6

Connection and Disconnection
Disconnection
STEP 1
Disconnect your KEW 3552 BT from the app.
1Tap button to disconnect.
Disconnecting...
2Now the selected KEW 3552 BT is disconnected.
The button switches to Connect button.
Message - Disconnected - appears.
Bluetooth is automatically disconnected when the
connected KEW 3552 BT is powered off. On an Android
device, connection process automatically resumes
when powering on the previously connected KEW 3552
BT.
7

Data saving
How to save the measured data
STEP 1
Connect KEW 3552 BT with your PC.
1Refer to the "Connection and Disconnection" pages to see how to connect the device.
STEP 2
Start measurement.
1Press the Test button on KEW 3552 BT (or Remote switch) and start a measurement.
Test button
2
Measured result is shown in the app screen.
8

Data saving
STEP 3
Save the measured data.
1Tap the [SAVE] button.
Tap the [SAVE] button.
Measured data is
saved and displayed.
After tapping [SAVE]
button,
9

Data saving
Items shown in the Saved data list
Title
Detail
Title
No.
* No. 1000 is the max.
Date
Function
Value Results obtained from KEW 3552 BT
Location
Comment 1
Any texts can be entered.
Comment 2
Tap the field to enter texts.
Serial No.
Additional info.
Serial No. of the connected KEW
3552BT
DC/AC of measured voltage, 1-min
value of insulation resistance, and
PI/DAR value
Detail
Data no. is assigned to the saved data.
(starting with no.1)
"VOLT": Voltage measurement
"50V" - "1000V": Insulation resistance
measurement
"CONT": Low-resistance measurement
"ON": saved with location info. "OFF":
saved without location info.
Date and time when the data was saved.
10

Data saving
Auto-save
STEP 1
Turn on the Auto-save function.
1Long press of [SAVE] button turns on this function.
Or, tap □ Auto button.
Auto-save function
Enabled
Tap the Auto button.
Auto-save function
Disabled
11

Data saving
STEP 2
Save the measured result automatically.
1Press the Test button on KEW 3552 BT and start a measurement.
Measuring… Done
Measurement
completes.
Measured results are shown in the list.
12

Creating/ editing files
Menu
STEP 1
Open the Menu.
1Tap the Option menu button.
Option menu
button
* To open the Menu, you need to disconnect the KEW 3552 BT first.
13

Creating/ editing files
STEP 2
Menu contents
1Details
Insulation status Turn on/ off the insulation status warning buzzer in the app.
buzzer * This setting doesn’t affect nor related to the buzzer setting of
KEW 3552 BT itself.
Display item Select the items to show or hide.
File description You can add annotation in the currently open file.
The entered annotation is displayed below the file name.
Select/create file Switch and select the file to be saved or displayed.
Creating a new file is also possible.
Delete Selection screen is shown. Select the record(s) you wish to delete and
tap “DELETE”. Tap back button to cancel selecting file(s).
Delete all Clear and delete all the records contained in the currently open file.
File descriptions won’t be cleared.
Download data from KEW 3552 BT
Download the saved data from KEW 3552 BT. ⇒P.28
Delete all data in KEW 3552 BT
Clear and delete all the data saved in KEW 3552 BT. ⇒P.29
Open in another app
Open the currently open file in another application.
Title
Detail
Currently displayed file name is displayed at the lower right in the meter screen.
14

Creating/ editing files
Creating a new file
STEP 1
Open the Select/ create file screen.
1Tap "Select/create file" on the menu.
STEP 2
Open Create new screen.
1
Tap the "+" symbol to create a new file.
Tap
File name
File description
FILE1
FILE2
FILE3
15

Creating/ editing files
2A window opens to create a new file.
STEP 3
Name the new file.
1Tap OK when file name enter completes.
Cancel to create a new file.
Create a new file under this
entered name.
16

Creating/ editing files
STEP 4
Created new file is shown.
1The new file you created appears.
New file name is displayed.
17

Creating/ editing files
To show another file
STEP 1
Open Select/ create file screen.
1Tap "Select/create file" on the menu.
STEP 2
Select the desired file.
1Select and tap the desired file.
Tap the desired file.
2The selected file is shown.
Details of the selected file is shown.
File name
File description
Saved records
FILE1
FILE2
FILE3
18

Editing the saved data
Add/ alter file descriptions
STEP 1
Open the File description screen.
1Tap "File description" to show a window to enter descriptions.
2Enter any descriptions and tap “OK”.
3New or updated descriptions are saved and displayed.
Entered file description is displayed.
19

Editing the saved data
Edit comments on records
STEP 1
Open a dialog box to enter comments on record.
1Tap the desired comment column in the shown list.
Example: To enter comments on “Comment 1” for “No. 10”
Tap the comment column you wish to modify.
2A dialog box pops up.
20