Kyoto Kagaku NCPR Simulator User manual

Instruction
Manual
MW32
NCPR Simulator
●Introduction
●Before you start
●
●
Training
Contents
Manufacturer’s Note P.1
DOs and DON’Ts P.1
Set includes/Conguration P.2
P.6-P.8
After training P.9
Preparation P.3-P.5
Do not mark on the model and other components
with pen or leave any printed materials contacted on
surface.Ink marks on the model cannot be removed.
Right Arm Installation Simulated Blood making
Umbilical blood preparation
Injection of the Stomach Fluid (Water)
Injection of the Simulated Blood
Airway Management
Umbilical Catheterization NG/OG Tube Feeling
Airway Suction
CPR
Training Positioning keeping/ Assessment of Anterior Fontanel
Drainage of umbilical blood and stomach uid/
replacing skin mask

The simulator is designed for training in neonatal care.Do not use for improper purpose.
Please read the instruction carefully before use.
Do not use the system in a way other than here in after prescribed by manufacturer.
Introduction Manufacturer’s Note /
DOs and DON’Ts
* Even if color on its surface might be changed across the ages,this does not aect the quality of its performance.
１
Manufacturer’s Note
DOs and DON’Ts
DOs DON’Ts
Features
Training Skills
Provides training in regards to the routine procedure for umbilical catheterization
for both the operator and assistant.
Omphalotomy/ Catheter insertion/ Ligation with clip or string/ Placement
Umbilical Catheterization
NG/OG Tube Feeding
Airway Suction
CPR
Airway Management
Training Positioning Keeping/ Assessment of Anterior Fontanel
・
・
・
・
・
・
Do not mark on the model and other components
with pen or leave any printed materials contacted on
surface.Ink marks on the model cannot be removed.
Handle the manikin and the components with
utmost care at all times.
Storage in a dark, cool space will help prevent the
skin colours from fading.
The manikin skin may be cleaned with a wet cloth,
if neccessary, using mildly soapy water or diluted
detergent.
Never use organic solvent like paint thinner to clean
the skin, as this will damage the simulator.
Do not leave the tapes or dressing materials onto
the manikin as the adhesive left on the surface will
become sticky.

Syringe
Lubricant
Plastic jar Instruction manual
Neonatal model Simulated blood (swab type)
Conguration
Conguration
２
Ａ
Ｃ
Ｄ
Set Includes
Before your first use, ensure that you have all components listed below.
Before You Start Set includes
a d
e
Bronchi
Stomach/
Esophagus
Umbilical Cord/
Blood storage bottle
Umbilical Cord Unit
Ribs/Lung
Oral Cavity
b
c
d
e
a
b
c

1.Screw the right arm to the shoulder.
３
Before Training Preparation
1Right Arm Installation
2.Remove the body skin. (The skin is fixed by six braces)
3.Remove the lung and rib and remove the umbilical part.

４
Before Training Preparation
２Simulated Blood making
３Umbilical blood preparation
2. Draw the simulated blood to the syringe attached.
1.Put out the umbilical blood bottle from umbilical part. Open it to fill with the umbilical blood. Install
the umbilical bottle into the umbilical part.
1. Pour 1000mL of water into the plastic beaker. Put the simulated blood (swab type) into the beaker
and stir the water sufficiently to prepare the simulated blood.
Take care not to drop simuleted
blood on clothes as simuleted
blood stains can be very dicult
to remove.
Caution

2.Put the umbilical part in the body, and the lung and rib on it. Cover the model with the body skin.
Put the umbilical cord through the body skin hole first, and put the body skin on the body to fix by
six braces.
５
Before Training Preparation
３Umbilical blood preparation
4
Injection of the Stomach Fluid (Water)
1.Connect the syringe to the connector under infra-axillary of the left side of body to inject
the stomach fluid. The volume is approximately 5ml. Remove the syringe when finished.

Training
7
Training Positioning keeping/
Assessment of Anterior Fontanel/
Umbilical Catheterization
１
Training for the position keeping and changing
Palpating to assess the anterior fontanel
Training Positioning keeping/ Assessment of Anterior Fontanel
2Umbilical Catheterization
Provides training for routine procedure of
umbilical catheterization
for both operator
and assistant.
Omphalotomy
Catheter insertion
Ligation with clip or string
Placement
●
●
●
●
Recommened Catheter Size; 16G 30cm

Training
7
●
●
3NG/OG Tube Feeding
NG/OG Tube Feeling
Air sounds can be heard with a stethoscope.
Training for the catheter insertion through
the nasogastric and orogastric tubes
The catheter placement by dressing
*Spray the attached lubricant
to the catheter, nasal and oral
cavity of model before practice.
Recommended catheter size; 5Fr.
4
Recommended catheter size; 5Fr.
Airway Suction
*Use the lubricant to spray the catheter, nasal and oral cavity of model before practicing.
Training for the nasogastric and orogastric suction
5CPR
Training for chest compression
Airway Suction/CPR

Airway Management
●
●
Training
8
６Airway Management
Recommended device size
Preparing for Intubation
Spray the lubricant into the oral cavity and device before intubation practice.
Tube：2.0～3.0 mm
Blade：0
Training for the procedure of intubation with laryngoscope
Training for the assessment of intubation to the esophagus or one-lung or two-lung intubation
Bag-Valve-Mask ventilation

After Training
9
１
２Replacing skin mask
Drainage of Umbilical blood and Stomach uid
Drainage of umbilical blood and
stomach uid /
replacing skin mask
1. Remove the skin mask from posterior part by lifting it.
2. Put the edge of mask on the gap of posterior head to cover the head when installing the face mask.
3. Refer to Preparation page regarding body skin replacement.
1. Remove the umbilical part and put out the
umbilical bottle to drain the simulated blood.
After that clean up the bottle and dry it up.
2. Connect the empty syringe to the connector
under infra-axillary of the left side to draw the
stomach uid.

2017.04
■ ■(World Wide)
Kyoto Kagaku America Inc.
Caution
Do not mark on the model and other components with pen or leave any printed materials
contacted on
surface. Ink marks on the model cannot be removed.
1 mask
mask
1 chest skin
chest skin
4 umbilical cord
umbilical cord
11400-010
11400-020
11400-030
For inquiries and service, please contact your distributor or KYOTO KAGAKU CO., LTD.
Consumable
parts
code name
1 lubricant
1 lubricant
11229-050
11388-400
code name
Simulated blood
Simulated blood
(Swab type:a set of 10)