Kyoto Kagaku MW2A User manual

1. Remove the genitalia unit from the torso manikin.
3. Disassemble the genital unit.
Make room between torso manikin and the genitalia unit by opening the thighs. Then take out the
genitalia unit from the torso manikin.
b) Remove the skin with the bladder holder from the outer frame.
a) The genital organ frame and the bladder holder are xed with two notches and nail shaped
fasteners. To disengage the parts, lift the genital organ frame with ngers.
37
１Disassemble the unit
Replacement of
consumable parts
2. Detach the rectum unit for enema training. Loosen the metal clip by tucking small wings together with
ngers and remove the rectum unit from the hook of the bladder reservoir. Detach from the connector.
S upport and hold tube
connector port when
removing the rectum unit.
Caution

Replace the genitalia skin or urethral tube at this moment and assemble the part as
P39-40 shows.
Caution
Replacement of the genitalia skin or the urethral tube
1.Remove the urethral tube by pulling it with peeling the skin of the penis.
２
38
１
c) Peel the skin from the bladder
holder.
d) Find the metal clip that holds the joint between the valve and
the urethral tube. Loosen the clip by tucking small wings
together with ngers and pull out the carefully.
Replacement of
consumable parts
Disassemble the unit
(Assemble the genitaria skin and the urethral tube as P33 shows.)