La Crosse Technology BBB87733 Operating and maintenance manual

Model: BBB87733
Instructional Manual
DC: 100615
Atomic Digital Wall Clock
Welcome ...........................................................................
Get Started ........................................................................
Settings: Time, Date, etc. ....................................................
Fahrenheit/Celsius & Time Zone Settings ...............................
Set Time Alarm ..................................................................
Activate/Deactivate Alarm ....................................................
Snooze ..............................................................................
Reset Button ......................................................................
Care and Maintenance .........................................................
Warranty & Support ............................................................
Specifications .....................................................................
FCC Statement ...................................................................
Canada Statement ..............................................................
1
1
2
3
6
5
4
4
3
4
4
4
7
Table of Contents

Welcome!
Thank you for purchasing the Atomic Digital Wall Clock, designed for
years of trouble free performance. Please read this important note
about setup. Thank you!
IMPORTANT:
After installing batteries, the clock will look for the Atomic time signal
for 7 minutes. The buttons will not function during the signal search.
Options:
• Hold the WWVB SEARCH button for 3 seconds to stop the Atomic
signal search.
• Manually set the time, date, and time zone.
• The clock will search for the Atomic time signal again after
midnight.
• Press WWVB SEARCH button anytime, to start an Atomic signal
search.
For information about Atomic Time, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Get Started
1. Insert 2 new AAA, Alkaline batteries into the clock. Observe the
correct polarity.
2. Wait for the clock to set itself to Pacic time zone (default) then
press the ZONE button to select your time zone.
OR
3. Stop the initial Atomic Time Search and set the time manually.
Page 1 www.lacrossetechnology.com/support BBB87333
AAA
AAA

Settings: Time, Date, etc.
• Hold the SET button to enter time set mode.
• Press the or buttons to adjust values.
• Press SET to conrm adjustments and move to next item.
Settings order:
1.12/24 Hour Format, 2. Hour, 3. Minutes, 4. Year, 5. Month,
6. Date, 7. Daylight Saving Indicator (ON to automatically change)
Press SET to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.
12/24 Hour Time Format
AM
P
AM P
AM
P
AM
P
P
DST
P
DST
Set Hour and Minutes
Set Year, Month, & Date
Daylight Saving Time Indicator
BBB87333 www.lacrossetechnology.com/support Page | 2

Choose Fahrenheit/Celsius
Select Time Zone
Fahrenheit/Celsius & Time Zone Settings
AM
P
AM
PPM
CE
• Press the ºF/ºC button to switch from Fahrenheit to Celsius
temperature display.
• This clock has four time zones to choose from.
• The default time zone is Pacic (P)
• Press the ZONE button to select your time zone.
o P = Pacic
o M= Mountain
o C = Central
o E = Eastern
Set Time Alarm
1. Hold the ALARM button for 3 seconds until the seconds are
replaced by the letters “AL”.
2. The alarm hour will ash.
3. Use the / buttons to set the hour. Press the ALARM button once.
4. The alarm minutes will ash,
5. Use the / buttons the set the minutes.
6. Press the ALARM button to conrm and exit.
AM
PAM
P
Page 3 www.lacrossetechnology.com/support BBB87333
AM
P

Activate/Deactivate Alarm
Setting the alarm time and activating the alarm are separate steps.
1. Press the ALARM button to enter alarm mode.
2. In alarm mode, press and release the to activate or deactivate
the time alarm.
3. The alarm icon (bell) will appear when active.
4. The alarm icon (bell) will disappear when inactive.
Snooze
• Press SNOOZE to silence an active alarm for 5 minutes.
• The alarm icon will ash.
• This is a crescendo alarm that will sound for 120 seconds unless
deactivated.
• Press any button to stop the alarm for 24 hours.
Reset Button
• If the atomic clock display appears distorted or is not responding to
buttons, use a pen or paper clip to press RESET one time.
• This will reset the atomic clock to default settings.
•Do not mix old and new batteries.
•Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.
•Always purchase the correct size and grade of battery most suitable for
intended use.
•Replace all batteries of a set at the same time.
•Clean the battery contacts and also those of the device prior to battery
installation.
•Ensure the batteries are installed with correct polarity (+ and -).
•Remove batteries from equipment which is not to be used for an extended
period of time.
•Promptly remove expired batteries.
Care and Maintenance
BBB87333 www.lacrossetechnology.com/support Page | 4

La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
Before returning a product, please contact our friendly
customer support with questions or visit our online help:
Phone: [phone]
Online Product Support:
www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
Warranty Address:
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
Protected under U.S. Patents:
5,978,738 | 6,076,044 | RE43903
Warranty and Support
Specications
Indoor • Temperature Range: 32°F to 122°F (0°C to 50°C)
• 2-AAA, IEC, LR3 batteries (not included)
Battery Life • 24 months with reputable batteries brands
Dimensions
• Humidity Range: 20%RH to 95%RH
• 8.66” W x 1.10” D x 6.69” H
(220.04 W x 27.94 D x 169.92 H mm)
Power
Page 5 www.lacrossetechnology.com/support BBB87333

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modications to this equipment. Such
modications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form,
even in part, or duplicated or processed using electronic, mechanical
or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it
contains is regularly checked and corrections are included in
subsequent editions. We disclaim any responsibility for any technical
error or printing error, or their consequences.
All trademarks and patents are recognized.
FCC Statement
BBB87333 www.lacrossetechnology.com/support Page | 6

This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Canada Statement
Page 7 www.lacrossetechnology.com/support BBB87333