LA Fitness DK850BAF01AA User manual

DK850BAF01AA
OWNER’S MANUAL

12012/3/2Ver1.1+V1.0
Pre Installation Tips / Selecting Where Your Bike Goes ……………………………………
Important Safety Instructions ………………………………………………………………
Specifications ………………………………………………………………………............
Assembly Parts ……………………………………………………...……………………….
Parts Details …………………………………………………………………………………
Assembly Procedures ……………………………………………………………………….
Operation Instruction ………………………………………………………………………..
Index
02
03
05
06
07
08
14

22012/3/2Ver1.1+V1.0
The following are tips to aid you in the installation of the 850B Fitness Bike:
1. Prepare all relevant parts before starting, this will save you time!
2. All screws are tightened by turning to the right and loosened to the left.
3. All tools needed for complete installation are provided.
4. Having another person to help will make it easier.
5. All instructions are written as if the user is positioned on the bike facing the computer.
Positioning
- The ideal place to use your bike is on solid and even ground.
- There should be at least a 45cm gap either side and behind for ease of getting on and off.
- Make sure a power socket is a suitable distance away.
- Try and put your bike in a room that is used often, keeping it in sight will keep you using it!
Moving Your Bike
- The 850B Fitness Bike is very heavy, so please ensure two people are available to move it.
- DO NOT grasp the bike by the computer.
-Only wheel the bike when indoors and on a flat surface. When used outdoors on concrete or
gravel the wheels may chip or buckle.
Pre Installation Tips
Selecting Where Your Bike Goes

32012/3/2Ver1.1+V1.0
When using this product, basic precautions should always be followed, including the following:
Please read the instruction carefully before starting to use this product.
Danger – To reduce the risk of electric shock：
Always unplug this product from the electrical outlet immediately after using and before cleaning the
treadmill.
Warning – To reduce the risk of burns, fire, electric shock, or physical injury：
1. The product should never be left unattended while plugged in.
2. When using the treadmill, please step on the treadmill before start. Do not start the treadmill and
then step on the equipment.
Unplug the product from the outlet when not in use or before putting on or taking off the clothes
and other belongings.
3. To avoid any danger, close supervision is necessary when this production is used by children,
invalids or disabled persons. So it is when the machine is working with such persons around.
4. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
5. Not proper or excessive training may be harmful to your health.
6. Be sure to use the product only for its intended use as described in this manual. Do not use any
attachment not recommended by the manufacturer in order to avoid any danger or accidents
7. Never operate the product if it has a damaged cord or plug, if it is not working properly, if it has
been damaged, or dropped into water. Please return the product to the service center of seller for
examination and repair.
8. Do not carry this product by the supply cord or use the cord as a handle.
Important Safety Instructions

42012/3/2Ver1.1+V1.0
9. Keep the cord away from hot surfaces or ground.
10. Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc.
11. Never drop or insert any objects into any vent of the treadmill.
12. Do not use or operate outdoors.
13. Place the treadmill on flat ground or flat roof.
14. Please confirm 100cm space away behind the bike or equipment.
15. Do not operate where aerosol (spray) products are being used or where oxygen is thin.
16. Before turning the product power off, turn all controls to the off position then remove the plug
from the outlet
17. Connect the product to a properly grounded outlet only.
18. If the machine has folding mechanism, user should descend the incline to original position after
workout.
19. The max weight of user is 180 kg.
20. The appliance is intended for commercial use only.
21. The safety level of the equipment can be maintained only if it is examined regularly for damage
and wear.
22. The baking system is speed-dependent in watt control mode and speed-independent for other
modes.
23. Place Customer Service Address (one of Manufacturer, Importer, Agent).
EX. No. 1, LANE 160, SEC. 2, TANFU-ROAD, TAN TZU HSIANG, TAICHUNG, TAIWAN, R.O.C.

52012/3/2Ver1.1+V1.0
Note: Charge your battery once per week
Max. User Weight 400 lbs/180 kg
Size of Machine 64 cm x 132 cm x 146 cm
Packing Weight of
Machine 62.2kg
Net Weight of
Machine 52.2kg
Power Supply 15V/1A DC (Charger)
Specifications

62012/3/2Ver1.1+V1.0
Assembly Parts

72012/3/2Ver1.1+V1.0
ITEM Description Qty
a Steel hexagon socket head screw M8xP1.25x25 Blue Nylok 4
b Spring washer M8 4
c Flat washer Ø8x Ø16x2.0t 4
d Inner steel hexagon socket head screw M8XP1.25X20 Blue Nylok 4
e Spring washer M8 4
f Umbrella-head cross screw blue nylok M4xP0.7x10 4
g Spring washer M4 4
h Round-head cross screw M5x15 3
i Allen wrench 6mmx40x120 <120 crossing for longer part> 1
Parts Details

82012/3/2Ver1.1+V1.0
STEP 1. Attaching the Seat to the Main Frame of the bike
1. After must first loads POPIN(H), then seat cushion (D) depends on the arrow direction insertion
frame group (C) localization then.
Assembly Procedures

92012/3/2Ver1.1+V1.0
STEP 2. Attaching the Upper Control Frame to the Main Frame
1. Thread the wire from the Bike Frame (B) to the Upper Control Frame (C), then place the two frames
together. Insert steel hexagon socket head screws (a), spring washers (b) and flat washers (c)
according to the figures and tighten.

10 2012/3/2Ver1.1+V1.0
STEP 3. Attaching the Handlebars
1. Thread the 3 wires in the Handles (E) through the exit of the bend pipe on the Control Frame.
Then fix the handlebars by tightening with the CKS Hex Screws (d) and Spring Washers (e)
according to the drawing below.
Caution:
When assembling the handles and upper control frame, kneeling down may be needed.
Please take care when standing back up to avoid hitting your head or causing other
injury.

11 2012/3/2Ver1.1+V1.0
STEP 4. Wire connection of control pipe system
1. Pull out the wires in the tube of the Upper Control Frame (B) according to the drawing
below.

12 2012/3/2Ver1.1+V1.0
STEP 5. Attaching the Computer
1. Connect the Computer (A) with the wires from the Upper Control Frame (B). Fix using Blue
Nylok Screws (f) and M4 Spring Washers (g). Make sure the screws have been tightened well
to avoid any loosening or possible damage to the computer.
Caution:
When assembling the Computer, kneeling down may be needed. Please take care when
standing back up to avoid hitting your head or causing other injury.
Make sure the bike is not plugged in when attaching the Computer to avoid a possible electric
shock.
When attaching the wires make sure they are connected securely and not wound around each
other or tangled in any way. This will avoid possible short circuiting.
No less than 2 persons are needed for assembly. One should hold the Computer in place while
the other connects the wires and tightens the screws.

13 2012/3/2Ver1.1+V1.0
STEP 6. Attaching the Decoration Covers to the Bike Frame
1. Finally, fasten the left and right decoration covers (G and F) with Round Head Philips
Screws (h) according to the drawing below.

14 2012/3/2Ver1.1+V1.0
Computer Operation Instructions
I. Subject Instruction
This computer is 7”with TFT-LCD window which can display SPEED、LEVEL、DISTANCE、
CAL、TIME、WAT T S 、BPM、RPM and PROGRAM figure.
II. Display and booting of the starting-up window
goals mode：Target TIME, DISTANCE and CALORIE exercise mode.
race mode: User can compete with computer according to the distance and time
he wants.
fitness test mode：6minutes of self-movement model of physical fitness
(heartbeat health evaluating)
HRC mode：Heartbeat exercise mode which has levels of 65%, 75%, 85% and
THR. Set the exercise levels in accordance with the
coach or requirements of self-direction.
programs mode：There are exercise program, stable exercise program and six

15 2012/3/2Ver1.1+V1.0
different kind of program to choose.
user mode: User can set up the intensity of each level freely, total are 32 levels.
III. Key Functions(Any effectively key should create one sound)
1. QUICK START：Press this key to start the machine directly and account numbers of all
kinds of function
2. STOP：Press this key to stop the counting of each program Under this data setting status,
press this KEY to return the standby mode.
3. PAUSE：Press PAUSE key to pause the program and all the windows will stop counting.
Press this key again to start.
4. MODE：Under start/ready status, press this key to switch Profile.
Press this key to change playground or project figure while running.
Zoom in or zoom out the menu under video mode(TV model).
5. ENTER：Enter into options or touch this key for confirmation.
6. CLEAR：When entering program control mode to set parameters, touch this key to get
back the default value and return to the first parameter or item. (one press will return one
level)
7. LEVEL ↑:Press this key to increase level and the values set up while running.
8. LEVEL ↓:Press this key to decrease level and the values set up while running.
9. FAN：After the motor starts, press this key to boot up the fan and in the running of the fan,
press this key to stop.
10. NUMBER KEY * 10 Key：(1,2,3,~0)
Press this key to input instant value under data setting status.
While setting parameters, this key is number instant key. Setting range is integral value. It
has single code input and double code combination input. Take 21 years old for example,
Press ”2”and release it first, and then press”1”(determinant time is within 1 second).

16 2012/3/2Ver1.1+V1.0
IV. Mode Instructions
1. For the treadmill is dynamo type, it need 25PRM above or 15VDC/1000ma
transformer to start the computer continuously.
2. When the treadmill not plug to the transformer, the computer will be totally powered
by dynamo. While the rotate speed is lower than 40RPM, the computer will be
powered by batteries. If not operated for 30 seconds, it will enter into electric save
mode(the screen will shut down).
3. When stepping(40RPM↑), the electric power will save automatically.
4. While the rotate speed is lower than 40RPM, it will display ”RPM↑”icon.
When ”RPM↑”display for 15 seconds, it will enter into PAUSE MODE and back to
start/ready menu after 45 seconds
5. Under electric save mode or PAUSE mode, when the rotate speed is higher than
60RPM, it will resume to start/ready menu.
6. Under Start/Ready mode or program control mode, if press key, it will enter
into start-up of Manual run directly.(Parameters adopt the default value)
7. Under Start/Ready status, you can press key to choose Goal mode, Programs
mode, Fitness Test Mode, HRC mode, USER mode or RACE mode in center window.
The selected item will show by blue frame.
8. Program mode：After choosing PROGRAM, adjust parameter, or press directly
to start.
9. If the value is above 0, it will be executed by countdown. When the value returns to
zero, the program is over. On the contrary, if the value is 0, it will be executed by
count up.
10. PROGRAM has 32 levels in all. The setting time will be executed averagely by 32
levels.
11. While setting any parameter, you can press to cancel the setting and back to
the first parameter or program control menu. All the parameters will get back to the
default value.
12. There are character strings to instruct the user how to operate under mode edit menu
or parameter setting menu.
13. While running, the center menu goes contrarotate like along playground. On the
bottom left corner will display the number of circles(LAPS) .Every circle is 0.4KM

17 2012/3/2Ver1.1+V1.0
(0.25MIL).You can switch it to project mode by pressing key.
14. After the program is over or under pause mode for 30 seconds, the buzzer will beep
for 5 sound and then the accumulate sport values will display in the center window
and after 20 seconds or press key, it will back to start/ready menu.

18 2012/3/2Ver1.1+V1.0
V. General Operation and Instructions：
1. Under start/ready status, press key, it will enter into MANUAL mode and after 3
seconds countdown, the treadmill will start running.
2. MANUAL mode has total 20 levels for your choice as you prefer.
3. There are 6 main program controls for choose under start/ready menu
4. User can press key to choose the desired LEVEL(According to the rotate speed,
the same LEVEL has different resistance feedback)
zGoal Mode
Time Goal：Set the time goal required if running in the destination area and when the goal is
reached, the program will stop automatically.
Distance Goal：This program serves to test the endurance of the user. When the user
completes the set miles within limited time and reaches the goal, the program will stop
operation automatically.
Calories Goal：This program serves to lose and control weight. When certain quantity of the
calories is exhausted within limited time, the program will stop operation automatically.
1. Press key to select this mode and press key into the target value
setting:
Press number instant key or to adjust WEIGHT(Preset value: 70kg; Range
is 23-180kg ), TIME(Preset value: 20 min; Range: 0, 10-99min) or
DISTANCE(Preset value: 5KM; Range: 0-99KM) or CALORIES(Preset value:
500Kcal; Range: 0-999 Kcal).
1. After setting the parameters or while setting parameters, press or
key to execute the program(The unset value will adopt the default value). The target
parameter is executed by countdown.
3. If you want to change the parameters, press key to back to the first item to
reset or press key to directly back to the start/ready status.

19 2012/3/2Ver1.1+V1.0
4. User can press key to choose the desired LEVEL(According to the rotate
speed, the same LEVEL has different resistance feedback)
zFitness Test Mode(Physical fitness training)
1. Press key to select this mode and press key into the target value
setting:
Press number instant key or to adjust WEIGHT(Preset value: 70kg;
Range is 23-180kg ), AGE(Preset value:30; Range: 10-90) and SEX(Preset is male;
male or female)
2. After setting the parameters or while setting parameters, press or
key to execute the program(The unset value will adopt the default value). The target
parameter is executed by countdown.(Program will calculate the criteria according to
the editing value).
3. If you want to change the parameters, press key to back to the first item to
reset or press key to directly back to the start/ready status.
4. Execute time is 6 minutes and every level time is 6 minutes divide 32 levels. It is
executed by countdown.
5. Male preset value: 150 Watts; Female preset value: 100 Watts. The value will increase
to the default value from 45Watts after starting the program
6. User can press key to choose the desired LEVEL(According to the rotate
speed, the same LEVEL has different resistance feedback)
7. After finished the program, it will enter into YOUR FITNESS TEST RESULT menu
automatically. FITNESS LEVEL window will display 1~5 number, 1 represents the
worst test result and 5 represents the best result.
8. FITNESS TEST mode comparison table：
If Distance is 0, the result number will be 0.
MALE
AGE HEART RATE
<35 >=186 >=170 >=139 >=129 <129
<45 >=183 >=165 >=124 >=112 <112
<55 >=186 >=167 >=127 >=100 <100
>=55 >=188 >=165 >=129 >=107 <107
RESULT 1 2 3 4 5