La Marzocco GB/5 Instruction sheet

La Marzocco GB-5 and Swift Grinder.
Installation Guidelines
Franke Coffee Systems Phone [phone]
North America, Inc. Fax [phone]
5601 1st Avenue South www.franke-cs.com
Seattle, WA 98108
3/8" Cold
Water
Supply
3/8" Cold
Water
Supply
110V, 15amp
Elec. Supply
to Swift EPS
Grinder (Plug
included)
Cabinet
S I D E V I E W
Floor
Drain
22"
high
2 Group 29.5" wide
3 Group 37.5" wide
4 Group 47" wide Swift EPS
Grinder 14" wide
18"-22"
Center Line of Machine
Overall Width Varies
2 1/2" Diameter Hole
for Utility Lines
25.5" deep
5/8"
Flexi
Drainline
3/8" Braided Stainless
Steel Cold Water Supply Line
C O
UN T E R T
O
P V I E
W
Back Edge of Countertop
Footprint
of
Grinder
All Electrical and Plumbing Must meet Local Codes
Water and Drain within 5'
Swift EPS
Grinder
14" deep
25"
high
Pump
and
Motor
220V Elec.
Supply
to
Motor
H2O Water
Treatment System
within 3'
Receptacle
220V single phase
elec. supply to espresso
machines.
Check
and match to plug.
Plug is
NOT included with the
machine.
Suggested NEMA plugs
and receptacles:
2 AV / EE: L6-30P; L6-30R
3 AV / EE: L6-50P; L6-50R
4 AV / EE: L6-50P; L6-50R
Circuit Breaker
Requirements:
2 AV / EE: 30 amp
3 AV / EE: 50 amp
4 AV / EE: 50 amp
2" of clearance
recommended
above grinder