LabelTac 9 User manual
WELCOME TO LABELTAC®- LET’S START LABELING
1|UNBOX & CHECK CONTENTS
2|CONNECT
3|INSTALL SOFTWARE
QUICK START GUIDE
LabelTac®9 Thermal Transfer Printer
Included Accessories
Option 1: Install from CD
Option 2: Digital download
Software CD
Connect the USB cable to the back of your
printer and plug the other end into a USB
port on your computer.
Put the included CD in your computer’s CD drive and
follow the prompts on your screen to install the software.
Head to the LabelTac®support page, select your printer
model, and download the driver for your printer.
labeltac.com/support
Plug the power cable into the power jack
socket. Plug the other end into a power outlet.
Power on your printer.
Note: It is important that your LabelTac®printer
is powered on before installing software.
USB Cable Power Cable Cleaning Swabs (2) Label Squeegee
123
DOWNLOAD THE USER MANUAL
The full LabelTac®9 User Manual can be downloaded
online at labeltac.com/manuals
SUPPORT
Your LabelTac®printer includes a free, full lifetime
warranty on all parts and labor and unlimited support by
phone, email or live chat.
Online Support labeltac.com/support
Support by phone 1-877-356-6584
HOW TO |LOAD LABEL SUPPLY
HOW TO |LOAD PRINT RIBBON
Lift the printer cover. Remove the media cap
from the media supply spindle. Place the
roll of supply on the spindle with the end of
the roll coming up and over the top. Replace
the media cap and center the roll.
Lift the printer cover. Push the print
head release lever to open the print head
mechanism.
Push the print head release lever to open
the print head mechanism.
Insert the ribbon onto the rear ribbon hub
and the blank cardboard core onto the front
ribbon hub.
Guide the end of the supply under the media
guide bar, between the label guides, through
the green media sensor, and out through the
mouth of the printer. Adjust the label guides
to t the supply width.
Thread the ribbon through the ribbon sensor
slot and up and over the print head. Tape
the end of the ribbon to the blank cardboard
core and wind the core up until the ribbon is
tight and wrinkle-free.
1
1
Check out videos on loading supplies and learn some helpful label making tips on our YouTube channel
youtube.com/labeltac
2
2
3
3
labeltac.com/support 1-877-356-6584
Need some more help with your printer?
Other manuals for 9
1
Other LabelTac Printer manuals
