Lacertosus FR47 User manual

FULL RACK
FR47(PR-T)

EXPLODED DRAWING& PARTS LIST
PART LIST

ASSEMBLY STEP
Note: Before starting assembly remove all parts and hardware from the
carton, ensure you have everything according to the list.
Step 1
Please install the Lower Connect Frame (3) to the Base frame (1), using Connector Plate
130*60(10), Flat Washer Φ13.5*Φ24*2.5(17), Nut M12(18), Hex Bolt M12*85(19)
Part
No.
Description
Q’ty
Part
No.
Description
Q’ty
1
Base frame
2
12
Ring Φ1.5*31
4
2
Side Connect Frame
2
13
Steel Cable Φ5.5*Φ1.6*330
4
3
Lower Connect Frame
1
14
Barbell Sleeve
2
4
Up Connect Frame
1
15
Plug F60*2
8
5
Long Safety Bar
2
16
Plug Φ32*2.5
4
6
Short Safety Bar
2
17
Flat Washer Φ13.5*Φ24*2.5
64
7
Main Tube
4
18
Nut M12
32
8
L Connector Plate
8
19
Hex Bolt M12*85
32
9
Connector Plate 130*60
6
20
Hex Bolt M6*10
2
10
Connector Plate 130*60
2
21
Rivet
4
11
PIN
4

Step 2
Fix the Main Tube(7) to Base Frame(1), Using L Connector Plate 130*60(8), Flat Washer
Φ13.5*Φ24*2.5(17), Nut M12(18), Hex Bolt M12*85(19)
Step 3
Fix the Main Tube(7) to Side Connect Frame (2), Using Connector Plate 130*60 (9), Flat
Washer Φ13.5*Φ24*2.5(17), Nut M12(18), Hex Bolt M12*85(19)

Step 4
Attach Up Connect Frame (4) to Side Connect Frame (2), Using Connector Plate 130*60 (9),
Flat Washer Φ13.5*Φ24*2.5(17), Nut M12(18), Hex Bolt M12*85(19)
Step 5
Assembly Long Safety Bar(5) and Long Safety Bar(6)
Please tighten all the nuts and bolts using wrenches.