Lafferty Sentinel 976936 Installation instructions

Lafferty Equipment Manufacturing, Inc.
Installation & Operation Instructions
Model # 976936 · Sentinel™ 1/2-Gallon Hand Sanitizer Dispenser
#
# -C
# -F
REQUIREMENTS
Chemical Container
1/2-Gallon, Round or Square
Spring-Loaded Pump Mechanism
OPTIONS
Model Number Ordering Guide
Wall Mount Style, Standard
Specify 'Counter Style'
Specify 'Floor Style'
www.laffertyequipment.com
501-851-2820
OVERVIEW
The Sentinel™ 1/2-Gallon Hand Sanitizer Dispenser is an all stainless steel dispenser for hand hygiene products (sanitizer or soap) and other chemicals. A heavy-
duty push lever depresses the pump on a user-supplied chemical container and dispenses an adjustable amount of product into the users hand. The industrial design
is perfect for dispensing hand sanitizer in high-traffic/high-use locations as with food preparation areas, hospitals, military facilities, retail stores, professional offices,
entertainment venues and countless other locations. This model is for round and square jugs and is offered as wall mount, counter, and floor styles.
W AR N I N G ! R E A D A L L
I N S T R U C T I O N S B E F O R E
U S I N G E Q U I P M E N T !
Lafferty Equipment Manufacturing, Inc. • 5614 Oak Grove Road • North Little Rock, Arkansas 72118

SAFETY & OPERATIONAL PRECAUTIONS
Manufacturer assumes no liability for the use or misuse of this unit.
Follow the chemical manufacturer's safe handling instructions.
TO INSTALL (REFER TO DIAGRAM ON NEXT PAGE)
1. Fasten mounting bracket to wall or other suitable surface. Use hardware that will support the weight of the unit
and product jug.
2. Slide dispenser onto mounting plate.
3. Lift push lever and place product jug with pump in jug rack.
4. If jug and pump are too tall or short, reposition jug rack to a different mounting hole on dispenser front.
Jug rack mounting hardware is accessible from rear of dispenser. See parts diagram.
5. Reduce push lever range of motion by loosening (raising) adjustment bolt.
TIP: To extend pump service life, prevent pump spring from fully compressing and impacting pump cap.
6. Lock adjustment bolt in place with nut.
7. Secure dispenser to mounting plate using holes at base. See parts diagram.
TO OPERATE
1. Press push lever to dispense product.
2. Refine output volume as desired.
TO REDUCE DISPENSING VOLUME
1. Lift push lever to vertical position.
2. Loosen adjustment bolt until it rises to sufficiently reduce push lever range of motion, thus reducing chemical
usage per press.
3. To discourage tampering, lock adjustment bolt in place with nut.
976936 • Sentinel™ 1/2-Gallon Hand Sanitizer Dispenser
- Page 2 -

976936 • Sentinel™ 1/2-Gallon Hand Sanitizer Dispenser
- Page 3 -

This page intentionally left blank.
976936 • Sentinel™ 1/2-Gallon Hand Sanitizer Dispenser
January 30th 2021 - Page 4 -