Laird SDC-EC25N Quick setup guide

SDC-EC25N
HARDWARE INTEGRATION GUIDE
VERSION 2.1
Americas: [phone] Option 2
Europe: [phone]
Hong Kong: [phone]
www.lairdtech.com/wireless

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
2
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
REVISION HISTORY
Version
Revision
Date
Change Description
Approved By
0.1
05/10/10
Preliminary version of the EC25N HIG.
Ron Seide
1.01
06/03/10
Added/revised antenna patterns
Ron Seide
2.0
11/08/12
Updated formatting (Laird).
Ron Seide
2.1
01/31/13
Updated Channel and Frequency data.
Ron Seide

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
3
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
CONTENTS
Scope ............................................................................................................................................................. 4
Block Diagram ................................................................................................................................................ 5
Specifications.................................................................................................................................................. 5
Pin Definitions .............................................................................................................................................. 10
Mechanical Specifications ............................................................................................................................. 11
Regulatory .................................................................................................................................................... 12
Antenna Characteristics ........................................................................................................................... 12
Documentation Requirements .................................................................................................................. 13

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
4
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
SCOPE
This document describes key hardware aspects of the Summit SDC-EC25N wireless LAN radio card. This
document is intended to assist device manufacturers and related parties with integration of this card into
their host devices. Data in this document are drawn from a number of sources and includes information
found in the Broadcom BCM4322 data sheet issued in August of 2008.
OPERATIONAL DESCRIPTION
This device is an SDC-EC25N, an IEEE 802.11n-compliant Peripheral
Components Interconnect Express (PCIe) Card which operates in the 2.4 GHz
and 5 GH portions of the radio frequency spectrum. The device is compliant
with IEEE 802.11a, 802.11b, 802.11g, and 802.11n standards using Direct
Sequence Spread Spectrum and Orthogonal Frequency Division Multiplexing.
The device supports all 802.11a, 802.11b, and 802.11g data rates and select
802.11n data rates and automatically adjusts data rates and operational
modes based on various environmental factors.
When operating on channels in the UNII-2 and UNII-2 Extended bands that
are in the 5GHz portion of the frequency spectrum and are subject to
Dynamic Frequency Selection requirements, the SDC-EC25N fully conforms
to applicable regulatory requirements. In the event that specified types of
radar are detected by the network infrastructure, the SDC-EC25N fully
conforms with commands from the infrastructure for radar avoidance.
The SDC-EC25N is compliant with 32-bit PCIe Express Card mechanical specifications and interfaces to host
devices via a 26-pin connector. The device is based on the Broadcom BCM4322 chip which is an 802.n
compliant integrated device providing a Media Access Controller (MAC), a Physical Layer Controller (PHY or
baseband processor), and fully integrated dual-band antenna that provides 2x2 antenna and MIMO support.
The frequency stability for both 2.4 GHz (802.11b and 802.11g) and 5 GHz (802.11a) operation is +/- 20
ppm.
The SDC-EC25N has its own RF shielding and does not require shielding provided by the host device into
which it is installed in order to maintain compliance with applicable regulatory standards. As such, the device
may be tested in a standalone configuration via an extender card.
The device buffers all data inputs so that it will comply with all applicable regulations even in the presence of
over-modulated input from the host device. Similarly, the SDC-EC25N incorporates power regulation to
comply with all applicable regulations even when receiving excess power from the host device.
The SDC-EC25N incorporates an antenna that supports dual band diversity when operating in 802.11a,
802.11b and 802.11g modes and 2 x 2 MIMO support when operating in 802.11n mode.
The device is labeled with all applicable regulatory information in a manner that’s compliant with all
regulatory standards. Regulatory operational requirements are included with this document and are to be
incorporated into the operating manual of any device into which the SDC-EC25N is installed. The EC25N is
designed for installation into mobile devices such as notebook computers which typically operate at distances
greater than 20 cm from the human body. See “ Documentation Requirements ” for more information.

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
5
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
BLOCK DIAGRAM
SPECIFICATIONS
Feature
Description
System Interface
32-bit Peripheral Component Interconnect Express (PCIe) Card
with 26 pin connector
Antenna
Dual Band for diversity and 2 x 2 MIMO support
Chip Set
Broadcom BCM4322
Input Power Requirements
3.3 VDC +/- 10%
Current Consumption
(At maximum transmit power setting)
Transmit: 600 mA (1980 mW)
Receive: 450 mA (1485 mW)
Standby: TBD mA (TBD mW)
Operating Temperature
-30° to 75°C (-22° to 167°F)
Operating Humidity
10 to 90% (non-condensing)
Storage Temperature
-40° to 80°C (-40° to 176°F)
Storage Humidity
10 to 90% (non-condensing)

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
6
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Feature
Description
Maximum Electrostatic Discharge
4 kV
Length
99.35 mm (3.91 in.)
Width
33.57 mm (1.32 in.)
Thickness
4.75 mm 0.18 in.)
Weight
15 g (0.53 oz.)
Mounting
26-pin connector and standard Express Card rails
Wireless Media
Direct Sequence-Spread Spectrum (DSSS)
Orthogonal Frequency Divisional Multiplexing (OFDM)
Media Access Protocol
Carrier sense multiple access with collision avoidance (CSMA/CA)
Network Architecture Types
Infrastructure and ad hoc
Network Standards
IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h,
802.11i, 802.11n
Data Rates Supported
802.11a (OFDM): 6, 9, 12, 18, 24, 36, 48, 54
802.11b (DSSS): 1, 2, 5.5, 11
802.11g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54
802.11n (OFDM, 20-MHz channels): 14, 29, 43, 58, 87, 116,
130, 144
802.11n (OFDM 40-MHz channels): 30, 60, 90, 120, 180, 240,
270, 300
Modulation
BPSK @ 1, 6, 9, 14, 30 Mbps
QPSK @ 2, 12, 18, 29, 43, 60, 90 Mbps
CCK @ 5.5,11 Mbps
16-QAM @ 24, 36, 58, 87, 120, 180 Mbps
64-QAM @ 48, 54, 116, 130, 144, 240, 270, 300 Mbps
Modulation and Coding Scheme
(MCS) Index Values Supported
0–15
Regulatory Domain Support
FCC (Americas, Parts of Asia and Middle East)
ETSI (Europe, Middle East, Africa and Parts of Asia)
MIC (formerly TELEC) (Japan)
KCC (Korea)
2.4 GHz Frequency Bands
ETSI
2.4 GHz to 2.483 GHz
FCC
2.4 GHz to 2.473 GHz
MIC (formerly TELEC)
2.4 GHz to 2.495 GHz
KCC

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
7
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Feature
Description
2.4 GHz to 2.483 GHz
5 GHz Frequency Bands
ETSI
5.15 GHz to 5.35 GHz
5.47 GHz to 5.725 GHz
FCC
5.15 GHz to 5.35 GHz
5.47 GHz to 5.725 GHz
5.725 GHz to 5.82 GHz
MIC (formerly TELEC)
5.15 GHz to 5.35 GHz
KCC
5.15 GHz to 5.35 GHz
5.725 GHz to 5.82 GHz
2.4 GHz, 20 MHz-wide Operating
Channels
ETSI: 13 (3 non-overlapping)
FCC: 11 (3 non-overlapping)
MIC: 14 (4 non-overlapping)
KCC: 13 (3 non-overlapping)
5 GHz, 20 MHz-wide Operating
Channels
ETSI: 19 non-overlapping
FCC: 23 non-overlapping
MIC: 8 non-overlapping
KCC: 12 non-overlapping
5 GHz, 40 MHz-wide Operating
Channels
ETSI: 9 non-overlapping
FCC: 11 non-overlapping
MIC: 4 non-overlapping
Transmit Power Settings
Note: Maximum transmit power varies
according to individual country
regulations. All values nominal, +/-2
dBm
802.11a:
14 dBm (25 mW)
802.11b:
17 dBm (50 mW)
802.11g:
17 dBm (50 mW)
802.11n (20 MHz wide 2.4 GHz channel operation):
17 dBm (50 mW)
802.11n (40 MHz wide 2.4 GHz channel operation):
14 dBm (25 mW)
802.11n (20 MHz wide 5 GHz channel operation):
15 dBm (30 mW)
802.11n (40 MHz wide 5 GHz channel operation):
14 dBm (25 mW)

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
8
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Feature
Description
Typical Receiver Sensitivity
Note: We cannot currently test Typical
Receiver Sensitivity for 802.11n due
to lack of availability of an applicable
AP (one that functions in Greenfield
mode). We will have these numbers
as soon as possible.
802.11a
6 Mbps
-85 dBm
12 Mbps
-83 dBm
18 Mbps
-80 dBm
24 Mbps
-76 dBm
36 Mbps
-73 dBm
48 Mbps
-70 dBm
54 Mbps
-65 dBm (PER <= 10%)
802.11b
1 Mbps
-96 dBm
2 Mbps
-95 dBm
5.5 Mbps
-94 dBm
11 Mbps
-90 dBm (PER <= 10%)
802.11g
6 Mbps
-94 dBm
12 Mbps
-88 dBm
18 Mbps
-86 dBm
24 Mbps
-83 dBm
36 Mbps
-78 dBm
48 Mbps
-76 dBm
54 Mbps
-75 dBm (PER <= 10%)
802.11n (20 MHz channels)
13 Mbps
TBD dBm
26 Mbps
TBD dBm
39 Mbps
TBD dBm
52 Mbps
TBD dBm
78 Mbps
TBD dBm
104 Mbps
TBD dBm
117 Mbps
TBD dBm
130 Mbps
TBD dBm (PER <= 10%)
802.11n (40 MHz channels)
27 Mbps
TBD dBm
54 Mbps
TBD dBm
81 Mbps
TBD dBm
108 Mbps
TBD dBm
162 Mbps
TBD dBm
216 Mbps
TBD dBm
243 Mbps
TBD dBm
270 Mbps
TBD dBm (PER <= 10%)

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
9
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Feature
Description
Delay Spread
600 ns @ 1 Mbps
500 ns @ 2 Mbps
400 ns @ 5.5 Mbps
400 ns @ 6 Mbps
400 ns @ 9 Mbps
200 ns @ 11 Mbps
350 ns @ 12 Mbps
350 ns @ 18 Mbps
250 ns @ 24 Mbps
250 ns @ 36 Mbps
150 ns @ 48 Mbps
150 ns @ 54 Mbps
Security
Standards
Wireless Equivalent Privacy (WEP)
Wi-Fi Protected Access (WPA)
IEEE 802.11i (WPA2)
Encryption
Wireless Equivalent Privacy (WEP, RC4 Algorithm)
Temporal Key Integrity Protocol (TKIP, RC4 Algorithm)
Advanced Encryption Standard (AES, Rijndael Algorithm)
Encryption Key Provisioning
Static (40-bit and 128-bit lengths)
Pre-Shared (PSK)
Dynamic
802.1X Extensible Authentication Protocol Types
EAP-FAST
EAP-TLS
EAP-TTLS
PEAP-TLS
PEAP-GTC
PEAP-MSCHAPv2
LEAP
Operating Systems Supported
Windows XP Professional and Embedded
Compliance
ETSI Regulatory Domain
EN 300 328
EN 301 489-1
EN 301 489-17
EN 301 893
EN 60950-1
EU 2011/65/EU (RoHS)
FCC Regulatory Domain
Part 15.247 Subpart C
Part 15.407 Subpart E
Industry Canada

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
10
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Feature
Description
RSS-210
RSS-Gen Issue 2
MIC Regulatory Domain
Article 2 Item 19, Category WW (2.4GHz Channels 1-13)
Article 2 Item 19-2, Category GZ (2.4GHz Channel 14)
Article 2 Item 19-3 Category XW (5150-5250 W52 & 5250-5350
W53)
Certifications
Wi-Fi Alliance
802.11a, 802.11b, 802.11g, 802.11n
WPA Enterprise
WPA2 Enterprise
Cisco Compatible Extensions
Warranty
Limited Lifetime
All specifications are subject to change without notice
PIN DEFINITIONS
Note: The following are industry-standard express card pinouts for reference only.
Pin
Number
Pin
Name
I/O
Power Supply
Description
Note
1
GND
Ground
2
No Connect
Not Used. Leave Open (Float)
3
No Connect
Not Used. Leave Open (Float)
4
No Connect
Not Used. Leave Open (Float)
5
No Connect
Not Used. Leave Open (Float)
6
No Connect
Not Used. Leave Open (Float)
7
No Connect
Not Used. Leave Open (Float)
8
No Connect
Not Used. Leave Open (Float)
9
VCC1_5
Primary 1.5 V Module Power
10
VCC1_5
Primary 1.5 V Module Power
11
WL_GPIO_1
Wake on Wireless LAN
12
VAUX_3_3
Auxiliary 3.3 V Module Power
13
PERST_L
Module Reset
14
VCC3_3
Primary 3.3 V Module Power
15
VCC3_3
Primary 3.3 V Module Power
16
CLKREQ_L
Reference clock request signal
17
No Connect
Not Used. Leave Open (Float)
18
REFCLK_N
Differential reference clock

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
11
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Pin
Number
Pin
Name
I/O
Power Supply
Description
Note
19
REFCLK_P
Differential reference clock
20
GND
Ground
21
PERn0
Differential transmit
22
PERp0
Differential transmit
23
GND
Ground
24
PETn0
Differential receive
25
PETp0
Differential receive
26
GND
Ground
MECHANICAL SPECIFICATIONS
The SDC-EC25N is fully compliant with the PCI Express Card Type 1 mechanical standard. It can therefore be
inserted in any Express Card hardware interface and typically does not require any additional mounting
hardware.

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
12
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
REGULATORY
Note: Operation in the 5150-5250 MHz band is limited to indoor use only in some regulatory domains.
Antenna Characteristics
The SDC-EC25N incorporates an integrated dual band antenna consisting of two separate antenna elements
to support transmit and receive diversity and 2 x 2 MIMO. The patterns for two separate antenna elements
are below:
Type: Dipole
Maximum 2.4 GHz Gain: 0 dBi
Maximum 5 GHz Gain: 0 dBi
Antenna 1 Patterns

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
13
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Antenna 2 Patterns
Documentation Requirements
In order to maintain regulatory compliance, when integrating the SDC-EC25N into a host device and
leveraging Summit’s grants and certifications, it is necessary to meet the documentation requirements set
forth by the applicable regulatory agencies. The following sections (FCC, Industry Canada, and European
Union) outline the information that may be included in the user’s guide and external labels for the host
devices into which the SDC-EC25N is integrated.
SDC-EC25N approvals are based on the SDC-PE15N.
FCC
User’s Guide Requirements
As outlined in the Operational Description, the SDC-EC25N complies with FCC Part 15 Rules for a Modular
Approval. To leverage Summit’s grant, the two conditions below must be met for the host device into which
the SDC-EC25N is integrated:
1. The antenna is installed with 20 cm maintained between the antenna and users.

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
14
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
2. The transmitter module is not co-located with any other transmitter or antenna that is capable of
simultaneous operation.
As long as the two conditions above are met, further transmitter testing is typically not required. However,
the OEM integrator is still responsible for testing its end-product for any additional compliance requirements
required with this module installed, such as (but not limited to) digital device emissions and PC peripheral
requirements.
IMPORTANT!
In the event that the two conditions above cannot be met (for example certain device
configurations or co-location with another transmitter), then the FCC authorization is
no longer considered valid and the FCC ID cannot be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
When using Summit’s FCC grant for the SDC-EC25N, the integrator must include specific information in the
user’s guide for the device into which the SDC-EC25N is integrated. The integrator must not provide
information to the end user regarding how to install or remove this RF module in the user’s manual of the
device into which the SDC-EC25N is integrated. The following FCC statements must be added in their
entirety and without modification into a prominent place in the user’s guide for the device into which the
SDC-EC25N is integrated:
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.”
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE: FCC Radiation Exposure Statement:

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
15
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Industry Canada
User’s Guide Requirements
As outlined in the Operational Description, the SDC-EC25N complies with Industry Canada (IC) rules for a
Limited Modular Approval. To leverage Summit’s grant, the two conditions below must be met for the host
device into which the SDC-EC25N is integrated:
1. The antenna is installed with 20 cm maintained between the antenna and users.
2. The transmitter module is not co-located with any other transmitter or antenna that is capable of
simultaneous operation.
As long as the two conditions above are met, further transmitter testing is typically not required. However,
the OEM integrator is still responsible for testing its end-product for any additional compliance requirements
required with this module installed, such as (but not limited to) digital device emissions and PC peripheral
requirements.
IMPORTANT!
In the event that the two conditions above cannot be met (for example certain device
configurations or co-location with another transmitter), then the IC authorization is no
longer considered valid and the IC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate IC authorization.
When using Summit’s IC grant for the SDC-EC25N, the integrator must include specific information in the
user’s guide for the device into which the SDC-EC25N is integrated. The integrator must not provide
information to the end user regarding how to install or remove this RF module in the user’s manual of the
device into which the SDC-EC25N is integrated. In addition to the required FCC statements outlined above,
the following IC statements must be added in their entirety and without modification into a prominent place
in the user’s guide for the device into which the SDC-EC25N is integrated:
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.
European Union
User’s Guide Requirements
The integrator must include specific information in the user’s guide for the device into which the SDC-EC25N
is integrated. In addition to the required FCC and IC statements outlined above, the following R&TTE
statements must be added in their entirety and without modification into a prominent place in the user’s
guide for the device into which the SDC-EC25N is integrated:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following
test methods have been applied in order to prove presumption of conformity with the essential
requirements of the R&TTE Directive 1999/5/EC:
EN60950-1:2001 A11:2004
Safety of Information Technology Equipment
EN 300 328 V1.7.1: (2006-10)

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
16
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum
modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE
Directive
EN 301 489-1 V1.6.1: (2005-09)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements
EN 301 489-17 V1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband
transmission systems and 5 GHz high performance RLAN equipment
EN 301 893 V1.5.1 (2008-12)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Broadband Radio Access Networks
(BRAN); Specific conditions for 5 GHz high performance RLAN equipment
EU 2002/95/EC (RoHS)
Declaration of Compliance –EU Directive 2003/95/EC; Reduction of Hazardous Substances (RoHS)
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member
states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor radio links and/or for supplying public access to
telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF
output power may be limited to 10 mW EIRP in the frequency range of 2454 –2483.5 MHz. For
detailed information the end-user should contact the national spectrum authority in France.
Česky
[Czech]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets
typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp =
type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, [name of manufacturer], declares that this [type of equipment] is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo]
cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o
exigibles de la Directiva 1999/5/CE.

SDC-EC25N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
17
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment]
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.
Italiano
[Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of
equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
Magyar
[Hungarian]
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy
1999/5/EC.
Português
[Portuguese]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in
ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak]
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a
všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen
tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.