Lancaster Miyota 8215 User manual

USER MANUAL
for Miyota Caliber
8215 - 8205 - 821A - 820A
Ref. code: 0668 - 0691

Normal
Crown
Position
Date
1st
position
2nd
position
Set the date / Set the day
Set the time
Setting the date and the day
- Pull out the crown to the first position
- Turn the crown counter-clockwise to set the
date or the day
- After the date has been set, push the crown
back to the regular position
Warnings
Automatic winding watch can also be hand
winded by turning the crown in first position
turning it 15-20 times and it will start to move
naturally after shaking slightly.
Do not set date between 9:00 pm – 1:00 am
Do not set day between 1:00 am – 4:30 am
Date & day window position may be located at
different position depending by the design of
the watch.
For some Lancaster Watches with a “screw
crown”, it is necessary, before doing the above
operations, screw the crown and then push it
back to its normal position and screw back it on
after setting date and time.
Automatic Calibers and Function
• Movement 8215 – Date / Hours / Minutes /
Seconds
• Movement 8205 – Day / Date / Hours /
Minutes / Seconds
• Movement 821A – Date / Hours / Minutes /
Seconds
• Movement 820A – Day / Date / Hours /
Minutes / Seconds
RUNNING TIME: 42 hours
VIBRATION FREQUENCY PER HOUR: 21600
vibration.
Setting the time
- Pull out the crown to the second positon
- Turn the crown to set hour and minute hands
- When the time is fixed push back the crown
to the regular position (1) and second hand
begins to run.
USER MANUAL
for Miyota Caliber
8215-8205-821A-820A