Lancaster MIYOTA OS21 User manual

USER’S MANUAL FOR MIYOTA
CALIBER OS21
30 30
LANCASTERITALIA.COM
REF. CODE
DEALER STAMP

30
30
30
USER’S MANUAL FOR MIYOTA
CALIBER OS21
A) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the normal position.
B) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
C) USING THE STOPWATCH
This chronograph is able to measure and display time in 1/4 second united up to
maximum of 59min 59sec.
Stopwatch will stop automatically after running continuously for 30 minutes.
[Measuring time with the stopwatch]
1. Press button "A" to start the stopwatch.
2. The stop watch can be started and stopped each time button "A" is pressed.
3. Press button “B” to reset the stopwatch and stopwatch minute and second hands
return to their (0) positions.
D) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the stopwatch second & minute hand does not
return to the (0) position.
1. Pull the crown out to the 2nd click position.
2. Press the button "A" once to set the chronograph second hand to the Zero position.
* The chronograph hands can be advanced rapidly by continuously pressing button "A".
3. Once the hands been set at Zero position, reset the time and return the crown to its normal
position.
“A” “A”
“B”
Time Measurement Stop
Reset
“A”
“B”
Button "A"
Button "B"
Normal
1st 2nd
Chronograph
minute hand
Chronograph
second hand
Second Hand
Date