Lancaster MIYOTA CALIBER JSO5 User manual

Italy
USER’S MANUAL FOR MIYOTA
CALIBER JS05/JS15/JS25
26 26

26
26
26
Italy
USER’S MANUAL FOR MIYOTA
CALIBER JSO5/JS15/JS25
Stopwatch
Minute Hand
Second Hand
Stopwatch
Second Hand24 Hour Hand
Stopwatch
Minute Hand
Stopwatch
Second Hand
24 Hour Hand
24 Hour Hand
Calendar
Button A
Normal Position
1st Click Position
2nd Click Position
Button B
Second Hand
Second Hand
Stopwatch
Second Hand
Stopwatch
Minute Hand
A) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the normal position.
B) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
C) USING THE STOPWATCH
This stopwatch is able to measure and display time in 1/1 second united up
to maximum of 30 minutes.
Stopwatch will stop automatically after running continuously for 30 minutes.
[Measuring time with the stopwatch]
1. Press button "A" to start the stopwatch.
2. The stop watch can be started and stopped each time button "A" is pressed.
3. Press button “B” to reset the stopwatch and stopwatch minute and second hands
return to their (0) positions.
D) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the stopwatch second & minute hand does not
return to the (0) position.
1. Pull the crown out to the 2nd click position.
2. Press the button "A" to set the stopwatch second hand forward.
Press the button "B" to set the stopwatch second hand back.
* The stopwatch minute hand is synchronized with stopwatch second hand.
* The stopwatch second hand can be advanced rapidly by continuously pressing button "A" or
"B".
3. Once the both hands been zeroed, reset the time and return the crown to its normal
position.
“A” “A”
“B”
Time Measurement Stop
Reset
“A”