Land Pride Retractable Box Scrapers HR3584 User manual

29
Box Scrapers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
305-054S 7/26/10
MRL3572 Not Shown
26995
HR35 & HRL35 Series (Retractable)
19” Lowback 24” Highback
HRL3578 HR3584
Working Width 78” 84”
Capacity 26 cu. ft. 31 cu. ft.
Weight 972 lbs. 1117 lbs.
Weight (with hydraulics) 981 lbs. 1119 lbs.
Number of Shanks 88
Shank Material 3/4” x 2 1/2” heat treated spring steel
Shank Penetration 3- positions (1”, 3” & 5” below scraper end plates)
Shank Tip Construction Replaceable heat treated dimpled-on tips
Shank Beam Pivots to lift shanks up; transport lock on shank tube
Lift Mechanism Hydraulic cylinder
Moldboard Roll-Formed Moldboard -17” Roll-Formed Moldboard - 23”
Side Panels 1/2” thick x 19” high x 30” deep 1/2” thick x 24” high x 30” deep
Depth of Bucket 28” 27 1/2”
Cutting Blades 2 ea. 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable
Maximum H.P. Rating 65 HP
3-Point Hitch Construction Harden bushings in upper and lower hitch points
3-Point Hitch Type Category l & II