use wet cloth or any other chemicals, such as gasoline, ethanol, diluents etc.
Do not plug or unplug any parts, which will easily damage the interface component.
Please remember to switch off the device after everyday business closing, for
energy saving.
Appoint special person to manage the device. Do not allow outsiders to operate the
device.
Stop using the device immediately, then unplug the switch and, timely respond to
the supplier if any abnormal situation occurs below:
1.Harsh noise generates during running;
2.Foreign matter or water is unguardedly poured into the device;
3.Bad smell gives off during running.
3.3 Transportation and Storage
-------------------------------------------------
Use general transportation way, and protect the device from rain and snow,
sunlight, mechanical impact, as well as pressing and damage. Move the device
with care and do not drop it.
Store the device in the original package. The store house must be free from
hazardous gases, flammable, explosive, erosive chemicals, strong mechanical
vibration, impact and magnetic field. The package is required to place 15cm higher
on the floor and with minimum spacing of 50cm to following objects such as wall,
thermal or cold sources, window or air inlet etc.
4、For product maintenance, please refer to Product Warranty.
5.FCC Statement
FCC standard compliance marking certifies that the product stipulated below:
S160
•conforms to the following harmonized standards :
–part 15 subpart B of the FCC rules
This class (B) digital apparatus complies with Canadian ICES-003.
Information to users:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
