Landmann 28240 User manual

THE HALO FIRE PIT
Model 28240
ASSEMBL INSTRUCTIONS
Model 28240
FOR SAFE OPERATION, PLEASE READ ALL ASSEMBLY
AND OPERATING INSTRUCTIONS BEFORE USE.
Congratulations on your purchase of the Halo Fire Pit!
At Landmann USA, our goal is to provide products that
are easy to assemble and fun to use. Should you have
questions, issues, a defective part or if you have any
questions concerning its use, please contact us at:
[email protected]
-OR-
1-800-321-3473 M-F 8-5 Eastern ime
Proof of purchase may be required.
Landmann USA
Cartersville, GA 30120
www.landmann-usa.com
Made in China
© 2007 Landmann USA
• HIS OU DOOR FIRE PI IS FOR
OU DOOR USE ONLY!
•A LA ER OF SAND, 1 1/2” TO 2” THICK
MUST BE ADDED TO THE BOTTOM OF
THE BOWL TO HELP PROTECT AGAINST
THE CORROSIVE NATURE OF THE ASHES.
• USE ONLY ON BRICK, CONCRE E, S ONE
OR O HER MASONRY SURFACES.
• DO NO USE ON LAWNS OR WOODEN
DECKS.
• USE NA URAL FIREWOOD BU NO OVER
12” LONG IN HIS OU DOOR FIRE PI .
• USE LANDMANN EAR H FRIENDLY™
FIREWOOD FOR CLEANER BURNING FIRES
WI HOU HE CHEMICAL SMELL O HER
AR IFICIAL FIREWOOD MAKES.
• DO NO USE MORE HAN 2 PIECES OF
FIREWOOD A A IME.
• KEEP HE OU DOOR FIRE PI AWAY
FROM BUILDINGS, FLAMMABLE I EMS
AND VEHICLES.
• HE OU DOOR FIRE PI IS FOR ADUL
USE ONLY.
• DO NO MOVE HE OU DOOR FIRE
PI WHILE I IS BEING USED.
• DO NO LEAVE UNA ENDED A ANY
IME WHILE IN USE.
• DO NO USE IN WINDY CONDI IONS.
• DO NO OVERLOAD OR USE O BURN
LEAVES OR GARBAGE.
• KEEP HE SPARK SCREEN IN PLACE
WHILE USING.
• USE CAU ION WHEN REMOVING HE
COVER, AS HO S EAM OR A FLARE UP
COULD CAUSE BURNS.
• BEFORE EACH USE, MAKE SURE HE
OU DOOR FIRE PI IS IN GOOD
WORKING CONDI ION.
• USE CAU ION AF ER HE FIRE HAS
BEEN EX INGUISHED- SURFACES WILL
REMAIN HO FOR SOME IME.
• BE SURE ALL COALS ARE COLD BEFORE
EMP YING. IF NECESSARY POUR WA ER
ON COALS.
READ FIRST!
RULES FOR SAFE OPERATION
PAGE 1
REV. 4, 11/21/07
!
!

Parts and Quantities:
PAGE 2
THE HALO FIRE PIT
Model 28240
Do not return roduct to the store. If
you have questions or trouble with
assembly, lease contact us at:
1-800-321-3473 or at
[email protected]
DON’T FORGET TO ADD A LA ER OF
SAND, 1 1/2” TO 2” THICK (OR ABOUT
5LBS) TO THE BOTTOM OF THE BOWL
TO HELP PROTECT AGAINST THE
CORROSIVE NATURE OF THE ASHES.
PART DESCRIPTI N QTY
A
B
C
D
E
F
G
LEGS
FIRE B WL
SPARK GUARD
P KER
15MM B LT
M6 NUT
EYEB LT
3
1
1
1
6
7
1
Assembly Instructions:
You will need these tools for assembly:
Medium phillips or flathead screw driver, pliers
or small adjustable wrench.
Step 1 Unpack all parts from the carton.
Step 2 Align leg (A) holes with holes in
fire bowl (B) and attach with six
15MM bolts and M6 nuts. Tighten
bolts securely.
Step 3 Attach the eyebolt (G) to the spark
guard (C) with one M6 nut. Tighten
securely.
Step 4 Place the spark guard on the fire bowl.
Step 5 Enjoy!
Maintenance:
The Halo Fire Pit may be cleaned with water and
mild detergent. Periodic maintenance is required
to return painted steel surfaces to original
appearance. Remove any rust with sandpaper or
steel brush. Repaint with grill paint for high
temperature surfaces. Follow paint manufacturerʼs
instructions. !