Lane EMMA NESTING User manual

ASSEMBLY INSTRUCTIONS
ITEM # : 30116-40
EMMA NESTING CONSOLE TABLE
Page 1 of 12 MADE IN VIETNAM

H2 ALLEN BOLT(Ø5/16'' *45MM) x 12
SPRING WASHER(5/16'') x 12
FLAT WASHER(5/16'') x 12
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
TABLE TOP x 1
BACK SUPPORT x 1
ABC
D
ALLEN KEY x 1
(M4)
H4 H5
NESTING CONSOLE PARTS & HARDWARE LIST
Please assemble with the tool provided or recommended. Do not use an impact drill.
Customer Service Contact Information:
Toll Free Phone Number: 1-844-771-2727
Email: [e-mail]
Website: www.lanefurniture.com
NOTES :
1. CHECK CAREFULLY FOR SMALL PARTS WHICH MAY COME LOOSE DURING SHIPMENT.
2. REMOVE ALL COMPONENTS FROM THE PACK AND PLACE ON A CLEAN, SOFT SURFACE TO ASSEMBLE.
3. UNITS SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
4. DO NOT OVER - TIGHTEN SCREW/ BOLTS UNTIL ASSEMBLY IS COMPLETED.
5. WITH USE, SCREW/ BOLT MAY BE COME LOOSE & MUST BE TIGHTENED PERIODICALLY.
Page 2 of 12 MADE IN VIETNAM
DOWEL x 4
(Ø8*30mm)
LSF SIDE FRAME x 1 RSF SIDE FRAME x 1

H1 ALLEN BOLT(Ø5/16'' *51 MM) x 4
SPRING WASHER(5/16'') x 4
FLAT WASHER(5/16'') x 4
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
TABLE TOP x 1
BACK SUPPORT x 1
EFG
H
ROLLING CONSOLE PARTS & HARDWARE LIST
Please assemble with the tool provided or recommended. Do not use an impact drill.
Customer Service Contact Information:
Toll Free Phone Number: 1-844-771-2727
Email: [e-mail]
Website: www.lanefurniture.com
NOTES :
1. CHECK CAREFULLY FOR SMALL PARTS WHICH MAY COME LOOSE DURING SHIPMENT.
2. REMOVE ALL COMPONENTS FROM THE PACK AND PLACE ON A CLEAN, SOFT SURFACE TO ASSEMBLE.
3. UNITS SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
4. DO NOT OVER - TIGHTEN SCREW/ BOLTS UNTIL ASSEMBLY IS COMPLETED.
5. WITH USE, SCREW/ BOLT MAY BE COME LOOSE & MUST BE TIGHTENED PERIODICALLY.
Page 3 of 12 MADE IN VIETNAM
ALLEN KEY x 1
(M4)
H5
H4 DOWEL x 4
(Ø8*30mm)
H3 ALLEN BOLT(Ø5/16'' *38 MM) x 6
SPRING WASHER(5/16'') x 6
FLAT WASHER(5/16'') x 6
RSF SIDE FRAME x 1
LSF SIDE FRAME x 1

H2 ALLEN BOLT(Ø5/16'' *45 MM) x 12
SPRING WASHER(5/16'') x 12
FLAT WASHER(5/16'') x 12
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
SEAT BOX x 1
IKL
M
ALLEN KEY x 1
(M4)
H5
STOOL PARTS & HARDWARE LIST
Please assemble with the tool provided or recommended. Do not use an impact drill.
Customer Service Contact Information:
Toll Free Phone Number: 1-844-771-2727
Email: [e-mail]
Website: www.lanefurniture.com
NOTES :
1. CHECK CAREFULLY FOR SMALL PARTS WHICH MAY COME LOOSE DURING SHIPMENT.
2. REMOVE ALL COMPONENTS FROM THE PACK AND PLACE ON A CLEAN, SOFT SURFACE TO ASSEMBLE.
3. UNITS SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
4. DO NOT OVER - TIGHTEN SCREW/ BOLTS UNTIL ASSEMBLY IS COMPLETED.
5. WITH USE, SCREW/ BOLT MAY BE COME LOOSE & MUST BE TIGHTENED PERIODICALLY.
Page 4 of 12 MADE IN VIETNAM
DOWEL x 12
(Ø8*30mm)
H4
SIDE STRETCHER x 2
BACK SIDE FRAME x 1 FRONT SIDE FRAME x 1

HARDWARE BLISTER PACKS ARE STORED INSIDE THE NESTING CONSOLE
Page 5 of 12 MADE IN VIETNAM
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
D
F
G
B
C
H
E
A
I
K
L
M

STEP 1 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
Page 6 of 12 MADE IN VIETNAM
STEP 2 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
H2
H5
H2H5
C
B
A
D
H2H5
H4

Page 7 of 12 MADE IN VIETNAM
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
NESTING CONSOLE ASSEMBLY COMPLETED

STEP 3 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
Page 8 of 12 MADE IN VIETNAM
STEP 4 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
H3H5
H1
H5
H3
H5
H4
G
F
E
H

Page 9 of 12 MADE IN VIETNAM
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
ROLLING CONSOLE ASSEMBLY COMPLETED

STEP 5 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
Page 10 of 12 MADE IN VIETNAM
STEP 6 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
H2
H5
H4
H4
H2
H5
LM
M
I

STEP 7 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
Page 11 of 12 MADE IN VIETNAM
STEP 8 ( x1)
Do not over-tighten the bolts. Make sure you use the lock washers to ensure the bolts stay fastened
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
H2
H5
H4
H4
H2
H5
K
K

Page 12 of 12 MADE IN VIETNAM
ITEM # 30116-40
EMMA NESTING CONSOLE TABLE
STOOL ASSEMBLY COMPLETED