Lane KONA 60581-72-01 User manual

R
ASSEMBLY INSTRUCTIONS
ITEM # : 60581-72-01 KONA ROUND DINING TABLE WHITE
Page 1 of 4 MADE IN VIETNAM

R
Customer Service Contact Information:
Toll Free Phone Number: 1-844-771-2727
Email: [email protected]
Website: www.lanefurniture.com
NOTES :
1. CHECK CAREFULLY FOR SMALL PARTS WHICH MAY COME LOOSE DURING SHIPMENT.
2. REMOVE ALL COMPONENTS FROM THE PACK AND PLACE ON A CLEAN, SOFT SURFACE TO ASSEMBLE.
3. UNITS SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
4. DO NOT OVER - TIGHTEN SCREW/ BOLTS UNTIL ASSEMBLY IS COMPLETED.
5. WITH USE, SCREW/ BOLT MAY BE COME LOOSE & MUST BE TIGHTENED PERIODICALLY.
Page 2 of 4 MADE IN VIETNAM
For Your Safety!
TEAM
LIFT
TABLE TOP x 1
A
H5 H6
SPRING WASHER x 17
(Ø5/16'' )
FLAT WASHER x 17
(Ø5/16'')
ALLEN KEY x 1
(M4)
H4
LOWER BASE x 1
B
UPPER BASE x 1
C
ITEM # 60581-72-01
KONA ROUND DINING TABLE
60581-72-01 PARTS & HARDWARE LIST
LEGS x 4 CONNECTOR TOP x 1
DE
H1
ALLEN BOLT x 8
(Ø5/16'' *55mm)
ALLEN BOLT x 5
(Ø5/16'' *40mm)
H2 H3
ALLEN BOLT x 4
(Ø5/16'' *32mm)

R
Page 3 of 4 MADE IN VIETNAM
HARDWARE BLISTER PACKS ARE STORED ON THE TOP OF THE TABLE BASE
HARDWARE
PACK
D
A
Customer Service Contact Information:
Toll Free Phone Number: 1-844-771-2727
Email: [email protected]
Website: www.lanefurniture.com
NOTES :
1. CHECK CAREFULLY FOR SMALL PARTS WHICH MAY COME LOOSE DURING SHIPMENT.
2. REMOVE ALL COMPONENTS FROM THE PACK AND PLACE ON A CLEAN, SOFT SURFACE TO ASSEMBLE.
3. UNITS SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
4. DO NOT OVER - TIGHTEN SCREW/ BOLTS UNTIL ASSEMBLY IS COMPLETED.
5. WITH USE, SCREW/ BOLT MAY BE COME LOOSE & MUST BE TIGHTENED PERIODICALLY. For Your Safety!
TEAM
LIFT
E
ITEM # 60581-72-01
KONA ROUND DINING TABLE
BD
D
C
D

R
STEP 1 (x1)
Page 4 of 4 MADE IN VIETNAM
STEP 2 (x1)
TABLE ASSEMBLY COMPLETED
ITEM # 60581-72-01
KONA ROUND DINING TABLE
H5
H4
H2
H6
B
C
H5
H4
H2
H6
D
H5
H4
H1
H6
E
LEVELER
H5 H4 H3 H6
A