Lanta Aurora 12T-V3 User guide

Owner Handbook
Aurora 12T-V3™
IR Rated High Power LED Outdoor Par Can

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
For your Safety
• Follow all instructions to maintain Manufacturer Warranty and for your own safety.
• There are no user replacement parts inside the product. Do not open the product for
any reason. This will invalidate your Manufacturer Warranty and may impair the safety
features of the product.
• All Lanta products designed for indoor use. Under no circumstances must these
products be used outdoors unless the product specification specifically defines the
product as being water resistant.
• Do not expose this product to moisture, rain or other fluids.
• Do not use if the product if you suspect it has been damaged in any way, including
being dropped, is malfunctioning, or has been exposed to liquids or moisture. The unit must
be repaired by an authorised service centre only. Manufacturer Warranty is void if the unit is
opened or adapted in any way. Operator safety may be compromised if this product is not
operated and maintained in accordance with the details contained in this Owner Handbook.
• This appliance must be earthed. Do not remove the earth connection in the plug or any
other location- it is essential for user safety.
• Be aware that products are mains powered and may be capable of producing high
voltages from its outputs and has mains voltages inside the cabinet.
Product Installation, Use & Maintenance
• Keep this Owner Handbook safe for future reference.
• Clean the product with a clean and dry, non-abrasive cloth. Do not use solvents or
liquids to clean the product.
• To prevent overheating, do not obstruct any ventilation opening, fan cover or vent. Do
not install near any sources of heat such as radiators, heaters or other heat producing
items such as amplifiers, power units etc.
• Never lift, move or carry the product by any other means other than the case as a
whole or handle if provided.
• Power connection to the product is via a UK 240 Volt AC three-pin mains plug. Do not
remove or adapt this plug. If necessary, only replace the plug top fuse with one of the
same type, size and value.
• The mains lead must not be crushed or damaged. If any damage occurs, disconnect
from the mains immediately. Replace the damaged cable, or if the mains lead is
captive, return the product to an authorised repair centre for cable replacement. Do
not attempt to repair the cable - it must be discarded and destroyed.
• To maintain the Manufacturer Warranty, only attach authorised accessories and external
devices. This includes cables, connectors and other electrical and/or mechanical devices.
• Unplug the product from the mains during lightning storms or periods of mains
fluctuations. If the product is going to be unused for long periods, unplug from the mains.

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
Product Quality & Compliance
Products from Lanta Lighting meet all required safety standards in force at the time of
manufacture and are fully compliant with them.
Unpacking & Inspection
• Inspect the packaging before opening. If the packaging appears to have sustained
significant damage, please take extra care before using the product. If you are in any
doubt, consult a suitably qualified professional.
• If you suspect the product has been damaged, do not use it. Return it to your original
supplier without delay.
• Keep all packaging in a safe place for storage or transportation in future.
Manufacturer Warranty
• This Manufacturer Warranty is valid in the UK only.
• Lanta Lighting warrants that this product is free from workmanship defects and material
failure during normal use and operation for a 12 month period from original date of
sale, providing all of the terms indicated in the warranty section have been fully
complied with. Please refer to your suppliers T&C’s for warranty details.
• Expressly excluded is our liability for any directly connected or indirectly connected item
or items or any consequential loss associated with the failure of the product however
caused.
• If the product has been opened, modified, tampered with, incorrectly connected,
used inappropriately or in conflict with the instructions herein, or the product model
or serial number has been damaged, removed, tampered with, obliterated or made
partly unreadable by any person or persons, the Manufacturer Warranty is irrevocably
null and void.
• No extension, adaption, alteration or modification to the terms of this Manufacturer
Warranty will be permitted, unless expressly authorised in writing (excluding email and
fax) by a Director of Lanta Lighting. Warranty is transferrable during the Warranty period.
For Further Information about Lanta Lighting
Our website can be found at www.lantalighting.com and is available for the benefit
of customers worldwide. Please consult for information, advice and support on this and
other high quality products from Lanta.

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
IMPORTANT!
Battery Operated Products
Some Lanta products include an internal battery for portable use. These batteries are
high energy rechargeable devices and for safety and product performance purposes
these batteries have a permanent connection between the appliance and the battery.
The batteries are constructed from Lithium Ion materials, a much safer product than
older generation primary Lithium batteries. Great care must be exercised when handling
and disposing of these batteries and they must only be accessed and/or serviced by an
authorised Lanta service centre.
DO NOT ATTEMPT TO ACCESS, MODIFY OR DISPOSE OF THE BATTERY!
End of life disposal of the product and/or the battery must not be disposed
in domestic rubbish or other non-specific recycling centre.
Only disposal sites that fully conform to the requirements of the EU Battery
Directive are permitted to recycle these products and batteries.
Please visit www.gov.uk for further information.
About Lanta Lighting™
Based in the UK, Lanta are committed to providing high quality products at cost-effective
prices to the professional lighting market. Since the first product was launched in 2006,
Lanta has established a reputation for reliability, common sense design and customer
support that has become the envy of others. All Lanta products are specifically designed
for UK operation and are optimized for 240VAC 50Hz UK mains power.
The Lanta Lighting range includes:-
Professional Lighting
Focussing on the use of LED technology, Lanta offer distinctive lighting effects for install
and mobile applications. From washes to floods, spots to projectors, LED technology now
outperforms traditional lights while at the same time requiring significantly lower power
and generating far less unwanted heat.
Atmospheric Effects
When you need special atmospheric effects, Lanta have everything from bubble
machines to fake snow, hazers and foggers. There’s also a range of fluids and consumables
specially designed to get the best from the range.
Control Gear
Lightweight and portable, Lanta Control Gear is robust enough to survive life on the road
and smart enough to control DMX kit whatever the venue.
Visit us at www.lantalighting.com for more details.

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
Getting to know your Lanta product
Dazzling and robust, the Lanta Aurora 12Tv3™ is a tri-colour outdoor spot designed to
enhance external features such as hotels, monuments, gardens and office blocks.
Model Number L70707
Light Source 36w Total Power (12 x 3w Tri-Colour LEDs)
Beam Angle 28°
Control 3, 5 or 7 channel DMX 512 control channels,
LED Display
Control Connections 3 Pin Female HD DMX, 3 Pin Male HD DMX
Run Modes Programmable static colour, colour mixing and
colour fading functions.
Ingress Protection IP66
Construction Die Cast
Power Requirement 240V AC 50Hz
Dimensions 230mm x 104mm x 243mm
Weight 2.5kg
104mm
230mm
243mm
Front Top

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
Operating Modes
There are distinct operating modes that are supported by this unit. To select,
use the “MODE” button to enter the menu. The “SETUP” button steps through specific
settings for each operating mode and the “UP” and “DOWN” buttons chooses from the
values available.
Auto Run Mode
Press the “MODE” until the display shows “AUTO”. The fixture will auto run between built in
programs PR02 – PR07.
In Built Programs
Press “Mode” Button until the display reads PRXX
Press the “Up” or “Down” buttons to select programs PR.01 – PR.07
auto
auto
MODE SETUP UP DOWN
prXX

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
Speed & Strobe
There are additional functions available to the user within the built in programs.
On program PR01, by pressing set up, you can select one of twelve built in colours using
the “up” and “down” buttons. By pressing the “Setup” Button again the display will show
“FSxx” Here you can set the strobe frequency for that colour. Press the up and down
buttons to adjust the frequency of the strobe.
Between PR02 – PR10 both the strobe and speed of the program can be adjusted. Whilst
on a program, press the “Setup” button once which will show “SPXX” By pressing the up
and down buttons you can adjust the speed of the program. By pressing the “Setup”
button for a second time the display will show “FSXX”. By pressing the Up and Down
buttons you can adjust the strobe frequency of the program.
Static Colour
Press the “Setup” Button until the display shows COLR. Use set up to select “r.XXX, g.XXX,
b.XXX or FSXX”. By pressing the Up or Down buttons you can adjust the brightness or each
colour and strobe frequency.
LED Display Shows Colour
r.XXX 0 - 255
g.XXX 0 - 255
b.XXX 0 - 255
FS.XX 0 - 99
spXX fsXX
colr

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
DMX Mode
Press the “MODE” button until the display shows “d.001”. Press the “UP” and “DOWN”
buttons to set the individual DMX value between d.001 - d.512.
To select the number of channels, Press the “SETUP” button, then the “UP” and “DOWN”
buttons to cycle through the number of DMX channels you require.
LED Display Shows DMX Control Mode
3-ch 3 Channel
5-ch 5 Channel
7-ch 7 Channel
3.ch
CHANNEL VALUE FUNCTION
CH1 0-255 RED
CH2 0-255 GREEN
CH3 0-255 BLUE
5.ch
CHANNEL VALUE FUNCTION
CH1 0-255 MASTER DIMMER
CH2 0-255 RED
CH3 GREEN
CH4 0-255 BLUE
CH5 0 - 9 NO USE
10 - 255 STROBE FREQUENCY
8.00i

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
7.ch
CHANNEL VALUE FUNCTION
CH1 0-255 MASTER DIMMER
CH2 0-255 RED
CH3 0-255 GREEN
CH4 0-255 BLUE
CH5
0-29 STROBE (colour selected by 1ch - 4ch)
30-59 BUILT IN PROGRAM AUTO RUN
60-89 BUILT IN PROGRAM 2
90-119 BUILT IN PROGRAM 3
120-149 BUILT IN PROGRAM 4
150-179 BUILT IN PROGRAM 5
180-209 BUILT IN PROGRAM 6
210-255 BUILT IN PROGRAM 7
CH6 0-255 PROGRAM SPEED
CH7 0-255 STROBE
Slave Mode
Press the “MODE” until the display shows “SLAV” to enter into Slave mode.
Self Protection
During long spells of operation on full power, the fixture will adjust the power consumption
to increase the dissipation of heat. Please ensure the fixture is well ventilated when in use
on full power for long spells.
Note:
To revert all stored settings back to default, a reset can be performed.
With the power off, hold “Mode” and “Setup” buttons down.
Power on and continue to hold for 5 seconds and then release.
The display will show “RSET” followed by model number and software version.
When “AUTO” is displayed the reset is complete.
slav

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
Red Green Blue RGB
0
100
200
300
400
350
500
450
600
550
250
150
50
LUX (lx)
Aurora 12T
Distance Red Green Blue RGB
200 2 7 2 x 11 x
150 5 14 4 x 21 x
100 15 45 11 x 71 x
50 75 163 43 x 257 x
0162 278 76 x490 x
50 75 163 43 x257 x
100 15 45 11 x71 x
150 514 4x21 x
200 272x11 x
200 150 100 50 0 50 100 150 200
Distance (cm)
12345678
Red 1006 336 162 92 60 42 32 23
Green 1644 558 260 154 98 69 52 41
Blue 470 150 72 41 27 19 14 9
RGB 3327 928 438 256 167 120 89 74
Illuminance Distribution

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
October 16 - Version 1
Aurora 12T-V3 Owner Handbook™
0 0.4 0.9 1.3 1.78 2.2 2.67 3.13 3.5
Diameter (mtr)
Distance (mtr)
0 1 2 3 4 5 6 7 8
1/2 Peak = 25°
0 50 100 150 200
Red 162 75 15 5 2
Green 278 163 45 14 7
Blue 76 43 11 4 2
RGB 490 257 71 21 11
Intensity From Centre
Beam Angle

www.lantalighting.com