Laskomex Bastion Orion II User manual

Bastion Orion II
Video door phone set

1. Safety of operation and maintenance 3
2. Purpose and characteristics of video door phone set 3
3. Elements of Apus II video door phone set 4
- MVC-7002 monitor 4
- BVC-7002 external panel 4
- feeder KSAD 1500120W1EU or GP005E-150-100 5
- Electro-catch 5
- Electro-catch feeder 5
4. Before the assembly 5
- Specify the places where elements are to be mounted 5
- Electric installation of video door phone 6
- Block diagrams 7
- Connection diagrams 7
5. Assembly and connecting elements of video door phone 9
- Assembly and connection MVC-7002 monitor 9
- Connection a second monitor 9
- Assembly and connection the external panel BVC-7002 9
- Feeder assembly 10
- Assembly of electro-catch 10
6. Operating video door phone 10
7. Maintance 11
8. Technical data 11
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl
Strona 2

1. Safety of operation and maintance
- Before installing and using the video door phone, read the assembly and operating
manual.
- Electrical installation should be made in accordance with PN-IEC 60364-1 standard
by an authorized person.
- Electrical installation should be made in such a way as to prevent exposure to direct
lightning discharge.
- Video door phone elements should be used as intended. Using video door phone
elements for other purposes, including with equipment other than specified in the
manual or connecting them in other manner than prescribed by the manufacturer may
lead to their damage, fire or electric shock.
- Do not cover the openings in the monitor housings.
- Do not insert any metal items in the openings in the monitor housing and the feeder
as it may lead to electric shock or fire.
- The external panel should be installed in a place with low noise level.
- Video door phone elements should be connected to an electrical installation when the
feeder is disconnected from the power network.
2. Purpose and characteristic of video door phone
- Video door phone Bastion Orion II is designed for single family houses, companies,
institutions and service providers.
- Two monitors may be connected to the external panel.
- To one calling button in panel you can connect two monitors. External panel
have two calling button.
- The video doorphone is a hands-free device featuring a colour display. The half-duplex
voice communication requires no manual channel switching: the direction is switched
by voice.
- The external panel is mounted in wall.
- The panel is equipped with a colour camera and a LED display facilitating viewing
visitors faces at night.
3
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

3. Elements of Apus II video door phone set:
Monitor MVC-7002
This is a hands-free (loudspeaking) monitor with a 5.8" colour display with brightness,
saturation and volume adjustment, turning on the camera view and triggering the door
release.
BVC-7002 outdoor panel
A vandal-proof stainless steel panel with a colour camera, camera illuminator, speaker,
microphone and calling button. The camera position can be adjusted both horizontally
and vertically. The panel is flush-mounted and equipped with adoor strike relay activated
on pressing the monitor button.
Rys 2. External panel BVC-7002: a) behind, b) front c) Description
of clamps
4
Fig 1. MVC-7002 video monitor
a) b)
Description
of clamps
LED indication
Screen
Microphone
Volume
Saturation Brightnes
screening
Door release
Talk/
end talk
Speaker
Adjusting
the angle
of the camera
Potentiometer
of volume
regulation
CCD camera
Camera
illumination
Speaker
Dials
button
Mic
1 audio
2 masa
3 Vcc+
4 wideo
J102
J103
15V GND +15V DC
Electro-catch
Clamps
J100
J101
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

KSAD 1500120W1EU or GP005E-150-100 power adapted
A 15V DC/1.2A or 15V DC/1A power adapter with IP40 protection grade. One of them
supplies power to the monitor and second supplies powers to the outdoor panel.
The package also includes:
- monitor holding bracket
- mounting screws
- wires with connectors necessary to connect the kit
Additional components not included in the basic kit:
Electro-catch
Electro-catch of 12V AC/1A max. should be used in the video door phone. While
selecting the electro-catch, take into account the mechanical build and type (left or
right) of the door or gate to be blocked. Electro-catch of Openers&Closers company
may be used (technical details at: www.laskomex.com.pl).
Feeder to electro-catch
ACV feeder: 12V AC/800 mA to mount on a DIN rail. Used to power to electro-catch.
4. Before the assembly
Specify the places where video door phone elements are to be mounted.
- Mount the monitor in a place not exposed to strong light (e.g. close to the lamp,
window etc.) as it may obstruct viewing image on the screen.
- Do not mount the monitor in place where it could be exposed to humidity e.g. in
bathrooms.
- Do not mount the monitor near the sources of strong electromagnetic interference
(wiring, TV sets etc.)
- Do not mount the monitor in heating sources - stoves, radiators etc.
- The external panel should be mounted in such a place that the camera lens is not
directed to light source (sun, strong lamp post) because it will significantly obstruct
or prevent viewing the visitors' faces.
- The image on the screen depends on the height the panel is mounted at. The
recommended height is ca. 150 cm. Such height allows for viewing the face of an
adult of average height standing ca. 50 cm from the panel. The assembly height should
be determined on a trial basis.
- Do not mount the external panel at the distance exceeding 100 m from monitor (with
Fig. 3. KSAD 1500120W1EU or GP005E-150-100 power adapter
5
Pin to J100 socket
(power supply)
+
-
red
black
with dashed line
all black
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

the appropriate cable sections).
- Mount the feeder inside, in a place not exposed to humidity.
- The above recommendations relate to both the monitor feeder and door strike feeder.
The door strike feeder may be mounted near the external panel (e.g. in the installation
box of fence pillar).
Electric installation of video door phone.
Elements of video door phone may be connected with any cable with section meeting
the requirements specified in Table 1.
Coaxial cable75 should be used to transmit video signal. The coaxial cable should
be connected as presented in Figure 7.
The maximum distance between the external panel and the monitor should not exceed
100 m.
To put down in the ground and outside the room it is necesarry to use the damp-proof
cables. The number of wires in the cables is shown on the single line diagram (fig. 4).
NOTE: It is necessary to pay special attention on quality of connection`s wires and also
on proper isolation of every connection especially when weather conditions
appears. It is recommended to use hermetic cable box and shrink wrap in the
place of joint the wires.
Maladjustment to those recommendation may lead to the impropriety activity
of the door phone set.
6
Table 1. Minimum cable section according to the distance between door phone elements
+Vcc,masa,audio
video
video
+Vcc,masa,audio
0,2mm2
<20m <50m
0,44mm2
Coaxial cable
<100m
1mm21.5mm2
maximum 4m,
Distance
Connection
outdoor station - monitor
power adapter - outdoor station,
power adapter - monitor
Power adapter - 230V
monitor - monitor
1mm2
0,75mm2
Coaxial
cable
0,2mm2
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

Figure 5. Block diagram of connecting elements of Orion II video door phone
Figure 4. Connection of Orion II video door phone - single line diagram.
7
2
230V 2
4
BVC-7002
feeder to
Electro-catch **
Electro-catch *
MVC-7002
~230V
~230V
2
2
2
2
2
4
MVC-7002*
~230V
2
2
MVC-7002
+ -~ ~
BVC-7002
J102J100
Electro-catch
feeder to
Electro-catch
J103
ATTENTION!!
-When connecting the outdoor panel to two apartments/houses,
remove Jumper 3 (JP3) on all monitors.
KSAD 1500120W1EU or
GP005E-150-100
KSAD 1500120W1EU or
GP005E-150-100
KSAD 1500120W1EU lub
GP005E-150-100*
KSAD 1500120W1EU lub
GP005E-150-100*
KSAD 1500120W1EU lub
GP005E-150-100*
J101
+ -
230V AC 15V DC/1.2A
~ ~
230V AC
12V AC/1A
~ ~
audio masa Vcc+ video
audio masa Vcc+ video
~ ~
230V AC
15V DC/1.2A
+ -
+ -
Red
Blue
White
Yellow
Red
Blue
White
Yellow
Red
Black
Red
Black
J100
* component not
included in the kit
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

8
Fig. 6. Block diagram of connections between the Orion II video doorphone kit components and the additional monitor
ATTENTION!! -When connecting the outdoor panel to two apartments/houses, remove Jumper 3 (JP3) on all monitors.
MVC-7002
J100
MVC-7002
BVC-7002
feeder to
Electro-catch
J102
J100
Electro-catch
*
+ -~ ~
MVC-7002
J100
+ -~ ~
J102 J103
J100
J102
Two monitors for one user
J102
KSAD 1500120W1EU or GP005E-150-100
KSAD 1500120W1EU or GP005E-150-100
KSAD 1500120W1EU or GP005E-150-100
KSAD 1500120W1EU lor GP005E-150-100
J101
-
230V AC 15V DC/1,2A
+
+ -
15V DC/1,2A
12V AC/1A
~ ~
audio masa wideo
Red
Blue
White
Yellow
+ -
15V DC/1,2A
+ -
230V AC
~ ~
230V AC
~ ~
230V AC
~ ~
+ -
-
230V AC 15V DC/1,2A
+
Vcc+
audio masa wideo
Vcc+
audio masa wideo
Vcc+
Red
Blue
White
Yellow
Red
Blue
White
Yellow
Red
Blue
White
Yellow
audio masa wideo
Vcc+
audio masa wideo
Vcc+
Red
Blue
White
Yellow
Red
Black
Red
Black
Red
Black
Black
Black
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

5. Installing and connecting the video doorphone components
Installing and connecting the MVC-7002 monitor
For easier installation, all the wires of the video doorphone can be run to a standard
cable box installed in the wall. Once mounted, the monitor should cover the whole box.
This will make it easier to install and mount the monitor.
- The monitor is mounted on a metal holding bracket fixed to the wall. To fix the bracket,
place it against the wall in the intended place of installation and mark holes for rawl
plugs.
- Drill the holes as market and fix the bracket to the wall using rawl plugs.
- Connect the wires to the J102 socket connector provided with the kit, as shown in the
diagram, by soldering them to the wiring system. Protect all soldered connections and
isolated portions of the wires against short-circuit with a shrinking sleeve or insulating
tape. Plug the connectors to the sockets.
- Mount the monitor on the holding bracket.
Installing and connecting the additional monitor
For connecting two MVC-7002 monitors to a single outdoor panel, run a separate power
supply (J100 socket) to the additional monitor and connect the two monitors. See Figure
4,5 and 6. Set jumper JP2 in the last most remote monitor from external panel.
JP2 - Matching impedance to the coaxial cable.
9
Rys 7. Connectors in MVC-7002 monitor
Pin to J102 socket
Pin to J103 socket
Pin to J100 socket
(power supply) Pin to J101 to
electro-catch
red
+
black
-
red
audio
white
wideo
yellow
Vcc+
blue
masa
red
audio
white
wideo
yellow
Vcc+
blue
masa
Installing and connecting the BVC-7002 panel.
- Unscrew the screws holding the panel to the casing.
- Place the casing at the intended place of installation, make a 242x112x46 mm cut-
out in the wall, and run the wires of the wiring system to the cut-out (see Fig. 8b). The
camera lens should be placed at a height of approx. 150 cm (see Fig.8a).
- Make a circular hole in the casing, pull the wiring system cable through the hole and
affix the casing to the cut-out in the wall (Fig. 8c).
- Connect the wires as shown in the diagram. Solder the coloured wires going from the
outdoor panel (see Figure 2 and 5) to the wiring system of the phone. Protect all soldered
connections and isolated portions of the wires against short-circuit with a shrinking
sleeve or insulating tape.
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

Installing and connecting the power adapter
The wire marked with a grey dotted line is plus, and the solid white one is minus  see
Fig. 3. The wires should be connected according to the connection diagram.
Installing and connecting the door release
The door release is controlled by the relay in the outdoor panel and must be powered
from a AC power adapter.
Install the door release in the gate or the entrance door according to the manufacturer's
recommendations. Then proceed to connect the wires in the outdoor panel (two black
wires), power adapter wires and the door release, as shown in the connection diagram
(see Figures 5, 6).
6. Video doorphone operation
- The upper calling button controls the J103 socket in the panel, and the lower button
controls the J102 socket.
- Pressing the calling button on the outdoor panel triggers a calling signal in the monitor
and switches on the camera view (if the additional monitor has been installed, the camera
view will display on both monitors).
- To switch on voice communication, press the button (talk, see Fig. 1). In two-monitor
installations, if voice communication has been established by one of the monitors, the
other one will switch off after approx. 1 minute.
- If voice communication is not activated after the calling, the monitor will automatically
switch off after approx. 1 minute.
- The talk time is limited to approx. 120 seconds, after which the phone will
automatically hang up.
- To hang up, press the button (talk) again.
- The door release can be activated at any time during the conversation by pressing the
button on the monitor. The release continues while the button remains pressed.
- The camera view on the monitor can be switched on at any moment by pressing the
Fig. 8. Outdoor panel installation
10
a) b c) d
Fig 9. Power socket connector of the J100 monitor
Pin to J100 socket
(power supply)
150 cm
Red
+
Black
-
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl
114mm
244mm
47mm

button (view). Pressing the button again will switch the view to the next entrance,
and pressing the button yet again will switch off the camera view.
- sequential operation. To activate voice communication in the camera view mode,
press the button (talk).
- To accept a redirected call, press the button (talk).
- The MVC-7002 monitor features controls for volume, brightness and colour saturation
adjustment (see Fig. 1).
7. Video doorphone maintance
Components of the video doorphone should be cleaned with a wet cloth or with cleaning
agents designed for plastics.
ATTENTION!
Do not use solvents or abrasive cleaners, as they can result in permanent damage to
the surface of the casing! Avoid any contact of doorphone components with water or
cleaning agents, as this might result in damaging the device and electric shock!
8. Technical data
Monitor MVC-7002
Screen size 5,8
Dimension 220x110x28mm
Supply voltage 15V DC/0.8A
Operation temperature 0°C...40°C
BVC-7002 external panel
Dimension 250x120x50mm
Operation temperature -20°C...55°C
Degree of protection IP55
Supply voltage 15V DC/0.12A
Angle of view vertical/horizon 82°, 62°
Angle adjustment +/- 15° horizon, +/-10° vertical
Power supply 1500120W1EU or GP005E-150-100
Input voltage 230V AC 230V AC
Output voltage 15V DC/1,2A max. 15V/1A
Dimension 81x43x67mm 81x43x67mm
Operation temperature 0°C...40°C 0°C...40°C
Degree of protection IP40 IP40
11
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl

This product was marked with a symbol of crossed dustbin
according to European Directive 2002/96/WE on used electric
and electronic equipment. Used equipment cannot be placed
with other wastes from households. Product user is obliged to
give it to the firm which collects used electronic or electric
equipment such as local collection points, shops, places appointed
by the producer or commune waste collection units.
INSTRUCTION ON ENVIRONMENT PROTECTION
List of collecting units of used Laskomex equipment is available on www.laskomex.com.pl
website or telephone No. 42 671 88 68.
Product packing should be removed according to environment protection regulations.
Remember!
Selective collection and recycling of used electronic and electric equipment
considerably contributes to the protection of human health and life as well as
protection of natural environment.
Return of packaging materials for the material recycling saves raw materials and
reduces generating of wastes.
V1.0 2013-12-25
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone], e-mail: [email protected], http://www.laskomex.com.pl
ul. D¹browskiego 249, 93-231 £ód, tel. [phone], fax [phone]
e-mail: [email protected], http://www.laskomex.com.pl