Launch X-431 PAD VI User manual

I
www.x431.com [phone]
LAUNCH PAD VII User Manual
Copyright Information
Copyright © 2019 LAUNCH TECH CO., LTD. All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this
information as applied to other units.
󰀩
losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse
of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply
with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or
problems arising from the use of any options or any consumable products other than those designated as
Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.
LAUNCH owns the complete intellectual property rights for the software used by this product. For any
reverse engineering or cracking actions against the software, LAUNCH will block the use of this product and
reserve the right to pursue their legal liabilities.

the time of printing.
LAUNCH reserves the right to make changes at any time without notice. While information of this manual
has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of

not be liable for any direct, special, incidental, indirect damages or any economic consequential damages

Trademark Information

All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in
this manual are either trademarks, registered trademarks, service marks, domain names, logos, company
󰀩
trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain names, logos, and company
names. Other products or company names referred to in this manual may be trademarks of their respective
owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark, service mark, domain
name, logo, or company name. You may contact LAUNCH by visiting the website at www.cnlaunch.com, or

Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to use Materials on this manual
for purposes or for all other questions relating to this manual.

II www.x431.com [phone]
LAUNCH PAD VII User Manual
IMPORTANT SAFETY INFORMATION
DANGER
When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal
system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon,

personal injury.
WARNING
Read all safety warnings and instructions.
*Note: Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury.
1. Always perform automotive testing in a safe environment.
2. Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
3. DO NOT attempt to operate the tool while driving the vehicle. Have second personal operate the
tool. Any distraction may cause an accident.
4. 

5. NEVER smoke or allow a spark or flame in vicinity of battery or engine. Do not operate the tool in

6. 
7. 
8. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
9. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark
plugs. These components create hazardous voltage when the engine is running.
10.To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully

11.
automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
12.Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clear the
outside of the equipment when necessary.
13.Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
14.Store the tool and accessories in a locked area out of the reach of children.
15.Do not use the tool while standing in water.
16.Do not expose the tool or power adaptor to rain or wet conditions. Water entering the tool or power
adaptor increases the risk of electric shock.

III
www.x431.com [phone]
LAUNCH PAD VII User Manual
Using This Manual
This manual contains device usage instructions.
Some illustrations shown in this manual may contain modules and optional equipment that are not included
in your system.
Conventions
The following conventions are used.
Bold Text

Example:
Tap OK.
Notes and Important Messages
Notes
A NOTE provides helpful information such as additional explanations, tips, and comments.
Example:
Note: In general, vehicle idencaon numbers are standardized - all contain 17 characters. VIN characters may
be capital leers A through Z and numbers 1 through 0; however, the leers I, O and Q are never used in order to
avoid mistakes of misreading. No signs or spaces are allowed in the VIN.
Warning
 indicates a hazardous situation which, if not avoided, could result in minor or moderate injury to
the operator or to bystanders.
Example:
Warning: Retrieving and using DTCs for troubleshooting vehicle operation is only one part of an overall
diagnosc strategy. Never replace a part based only on the DTC denion. Each DTC has a set of tesng procedures,
instrucons and ow charts that must be followed to conrm the locaon of the problem. This informaon can be
found in the vehicle’s service manual.
Danger
DANGER indicates an imminently or potentially hazardous situation which, if not avoided, could result in
death or serious injury to the operator or to bystanders.
Example:
Danger: If you must drive the vehicle in order to perform a troubleshoong procedure, always have a second
person help you. Trying to drive and operate the diagnosc tool at the same me is dangerous, and could cause a
serious trac accident.
Hyperlink
Hyperlinks, or links, that take you to other related articles, procedures, and illustrations are available in

website link or an email address link.
Illustrations

tested. Observe the menu titles and on-screen instructions to make correct option selection.

IV www.x431.com [phone]
LAUNCH PAD VII User Manual
Table of Contents
1 Introduction.................................................................................................................................................1
...........................................................................................................................................1
1.2 Accessory Checklist...................................................................................................................................2
2 Components & Controls............................................................................................................................4
2.1 Display Tablet............................................................................................................................................4
2.2 SmartLink C Device...................................................................................................................................6
 ............................................................................................................................7
3 Preparations................................................................................................................................................8
3.1 Charging the Tablet ...................................................................................................................................8
..........................................................................................................................................8
....................................................................................................................8
3.4 Wi-Fi Setup................................................................................................................................................9
.................................................................................................................................... 10
3.6 Change System Language..................................................................................................................... 10
3.7 Set Standby Time................................................................................................................................... 10
4 Initial Use...................................................................................................................................................11
4.1 Register & Download Diagnostic Software..............................................................................................11
4.2 Job Menu................................................................................................................................................ 13
4.3 Connections............................................................................................................................................ 14
4.3.1 Preparation.......................................................................................................................................... 14
4.3.2 DLC Location....................................................................................................................................... 14
4.3.3 Vehicle Connection.............................................................................................................................. 15
4.4 Communication Setup............................................................................................................................ 15
5 Start Diagnostics..................................................................................................................................... 17
................................................................................................................................ 17
5.2 Local Diagnose....................................................................................................................................... 20
5.2.1 Main Menu..................................................................................................................................... 20
 ..................................................................................................................................... 21
5.2.3 Manual Selection........................................................................................................................... 22
5.3 Diagnostic History................................................................................................................................... 31
5.4 Feedback................................................................................................................................................ 32
6 Maintenance Reset.................................................................................................................................. 33
6.1 Oil Reset Service.................................................................................................................................... 33
.............................................................................................................. 34
6.3 Steering Angle Calibration...................................................................................................................... 34
.......................................................................................................................................... 34
6.5 Tire Pressure Monitor System Reset...................................................................................................... 34
6.6 Gear Learning......................................................................................................................................... 34
......................................................................................................................................... 34
 ....................................................................................................................................... 35
 ....................................................................................................... 35

V
www.x431.com [phone]
LAUNCH PAD VII User Manual
 ....................................................................................... 35
6.11 Electronic Throttle Position Reset ........................................................................................................ 35
6.12 Gearbox Matching................................................................................................................................ 35
....................................................................................... 36
 ............................................................................................................................. 36
6.15 Suspension Calibration ........................................................................................................................ 36
6.16 EGR Adaption....................................................................................................................................... 36
6.17 Seats Calibration.................................................................................................................................. 36
6.18 Tyre Reset............................................................................................................................................ 36
...................................................................................................................................... 36
................................................................................ 36
6.21 NOx Sensor Reset................................................................................................................................ 36
7 Software Update...................................................................................................................................... 37
7.1 Update Diagnostic Software & APP........................................................................................................ 37
7.2 Update Frequently Used Software ......................................................................................................... 37
7.3 Renew Subscription................................................................................................................................ 38
8 SmartLink Diag........................................................................................................................................ 39
............................................................................................................................................. 39
8.2 Perform SmartLink Remote Operation................................................................................................... 41
8.2.1 Posting remote assistance request.............................................................................................. 41
8.2.2 Connections & operations............................................................................................................ 42
9 TPMS......................................................................................................................................................... 45
9.1 Working Principle.................................................................................................................................... 45
9.2 Operation Flowchart............................................................................................................................... 46
 .................................................................................................................................. 47
 ......................................................................................................................................... 47
9.3.2 Unbinding..................................................................................................................................... 48
10 ADAS ...................................................................................................................................................... 49
11 User Info................................................................................................................................................. 51
11.1 My Report............................................................................................................................................. 51
........................................................................................................................................................ 52
 .......................................................................................................................................... 52
 ............................................................................................................. 52
11.5 Data Stream Sample ............................................................................................................................ 52
11.6 Vehicle Voltage..................................................................................................................................... 52
11.7 My Order............................................................................................................................................... 53
11.8 Subscription Renewal Card.................................................................................................................. 53
.................................................................................................................................................... 53
11.10 Change Password .............................................................................................................................. 53
11.11 Settings............................................................................................................................................... 53
11.11.1 Units.......................................................................................................................................... 53
....................................................................................................................... 53
11.11.3 Printer Set................................................................................................................................. 53

VI www.x431.com [phone]
LAUNCH PAD VII User Manual
11.11.4 Clear Cache.............................................................................................................................. 55
11.11.5 About......................................................................................................................................... 55
11.11.6 Diagnostic Software Auto Update............................................................................................. 56
 ................................................................................................ 56
11.12 Diagnostic Software Clear.................................................................................................................. 56
12 Others..................................................................................................................................................... 57
12.1 Remote Diagnose................................................................................................................................. 57
.......................................................................................................................... 57
12.1.2 Add Friends................................................................................................................................ 57
.............................................................................................................. 58
.......................................................................... 59
................................................................................ 61
12.2 Toolbox................................................................................................................................................. 62
12.3 Tablet Setting........................................................................................................................................ 62
12.4 Files...................................................................................................................................................... 62
12.5 Wireless Upgrade................................................................................................................................. 63
12.6 TeamViewer QS.................................................................................................................................... 64
12.7 Recording Master................................................................................................................................. 64
 ................................................................................................................................................ 64
12.9 Camera................................................................................................................................................. 64
12.10 Gallery................................................................................................................................................ 65
12.11 Video Player ....................................................................................................................................... 65
12.12 E-Mail ................................................................................................................................................. 65
12.13 Calculator ........................................................................................................................................... 65
13 J2534 Reprogramming Using SmartLink C......................................................................................... 66
13.1 As a Local J2534 PassThru Device...................................................................................................... 66
13.2 As a Remote J2534 PassThru Device.................................................................................................. 66
14 FAQ......................................................................................................................................................... 68
 ............................................................................................................................ 68
14.2 About SmartLink Diag........................................................................................................................... 70
15 Glossary of Terms & Abbreviations .................................................................................................... 72

Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
1
www.x431.com [phone]
LAUNCH PAD VII User Manual
1 Introduction
1.1 Product Prole

This Android OS-based, tablet-style scanner incorporates the best possible coverage of OE-level

and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing
precise test result.

resolution of 1920 x 1080 dots, it delivers quick and complete diagnostic functionalities which technicians
need to diagnose, research and repair vehicles in one solution.

• Intelligent Diagnose


eliminating guesswork and step-by-step manual menu selection.
• Local Diagnose
Follow the on-screen prompts to start diagnostic session step by step. Diagnosis functions include: Read
DTCs, Clear DTCs, Read Data Stream, Special Functions etc.
• Reset



Regeneration, Electronic Throttle Position Reset, Gearbox Matching, AFS (Adaptive Front-lighting

• SmartLink Diag.


can seek a trusted second opinion or additional expertise on various vehicle issues from remote master


• TPMS
Enables you to activate tire pressure information, program tire pressure sensor and perform the TPMS

kinds of various TPMS functions.
• One-click Update
Lets you update your diagnostic software online.
• Feedback
Enables you to submit the vehicle diagnostic software problems or app bugs to us for analysis and
troubleshooting.
• ADAS


• Mall
Enables you to subscribe some extra software or service functions that are not integrated in the tool
online.
• Vehicle Coverage
Checks which vehicle models are supported on this tool.
• Remote Diagnose
This helps repair shops or mechanics to diagnose a remote vehicle, and launch instant messages,

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
2www.x431.com [phone]
LAUNCH PAD VII User Manual
󰀩
• Diagnostic History
This function provides a quick access to the tested vehicles and users can choose to view the test report
or resume from the last operation, without starting from scratch.
• Add-on Modules


1.2 Accessory Checklist
󰀨

this tool together.
No. Name Qt. Picture & Notes
1Display Tablet 1
2SmartLink C Device 1
3Diagnostic Cable 1(Connects the SmartLink C device to the
)
4Data Cable (Type A- Type B) 1(Connects the SmartLink C device to PC for

5Data Cable (Type A- Type C) (Connects the tablet to PC for data

6Crossover Cable 1
(Connects the SmartLink C device to
the modem while performing SmartLink


Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
3
www.x431.com [phone]
LAUNCH PAD VII User Manual
7Power Adaptor 1’

8Password Envelope 1

Activation Code, which is required for your

9Cigarette Lighter Cable 1(To provide power to the non-16pin connector
through connection to the Cigarette Lighter
receptacle.)
10 Battery Clamps Cable 1
(To provide power to the non-16pin connector
through connection to the vehicle's battery.)
11 OBD I Adaptor 1
(A adaptor cable for connecting non-16 pin

12 Mini High Denition Media
Interface Cable 1
(To mirror the tablet screen onto an external

13 Non-16pin Connector Kit 

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
4www.x431.com [phone]
LAUNCH PAD VII User Manual
2 Components & Controls
There are two main components to the diagnostic system:
 Display Tablet -- the central processor and monitor for the system (For details, please refer to Chapter

 
2.1 Display Tablet
The tablet acts as the central processing system, which is used to receive and analyze the live vehicle data
from the SmartLink C device and then output the test result.

Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
5
www.x431.com [phone]
LAUNCH PAD VII User Manual
The following table formulates ports and indicators of display tablet:
No. Name & Descriptions
1Charging indicator 

2Microphone
3Front Camera
4Handgrip
5Power/Screen Lock Button -- 
screen with short press.
6Volume Buttons -- To adjust the volume.
Note: Press and hold [POWER] and [VOL -] key to capture the current screenshot.
7Display Screen
8DC IN Port -- Connects the power adaptor to charge the tablet.
9Type-C Data Transmission Port -- Connects it to the PC for data exchange.
10 Type-A Port 

11 Memory Card Slot -- Stores the memory card for storage expansion.
SIM Card Slot -- Disabled for this edition.
12 High Definition Multimedia Output Port -- Connects it to an external projector or
monitor with similar interface.
No. Name & Descriptions
13 Rear Camera
14 Camera Flash

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
6www.x431.com [phone]
LAUNCH PAD VII User Manual
15 Audio Speaker
16 Adjustable Kickstand - Flip out it to any angle and work comfortable at your desk, or
hang it on automotive part.
2.2 SmartLink C Device
The SmartLink C device features powerful functions and it can be applied in the following situations:
1. When as a VCI (Vehicle Communication Interface), it needs to work in conjunction with the Diagnose
module of the tablet, which is used to obtain vehicle data, and then send it to the tablet for analysis via

2. When as a SmartLink C (Customer) dongle, it does not communicate with the tablet, but it needs
to work together with the SmartLink module of the tablet. The tablet is mainly used to issue remote
diagnostic requests, and the SmartLink C dongle is networked to receive and execute commands from

Note: For detailed operations, please refer to Chapter 8.
3. When as a local or remote J2534 PassThru device, it can be used in conjunction with the PC installed
with OEM diagnostic software.
Note: For detailed operations, please refer to Chapter 13.
No. Name & Descriptions
1OBD-16 Diagnostic Connector


Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
7
www.x431.com [phone]
LAUNCH PAD VII User Manual
2Display Screen
3LAN/WAN Port 
cable.
4Data I/O Port -- Connects the SmartLink C device to the PC via the data cable when as
a J2534 PassThru device.
5
DC-IN Port -- Currently disabled and for manufacturer use only.
Warning: The SmartLink C device obtains power through the vehicle's DLC, and it is
prohibited to connect to an external DC power supply. No responsibility can be assumed for
any damage or loss caused as a result of not strictly following the above method.
2.3 Technical Specications
A. Display Tablet
Item Description
Operating system Android 9
CPU Octa-core processor, 2GHz
Display 
Memory 
Hard disk 
Connectivity  
 
Camera 
HDMI 
Speaker Two 1.5W speakers
Microphone Two microphones
Operating Temperature -10℃~ 50℃(14 ~122℉
Storage Temperature -20℃~ 70℃(-4 ~158℉
B. SmartLink C Device
Item Description
Working voltage DC 9V ~ 36V
Size 204mm x 110mm x 45mm
Typical power consumption 
Communication via 
Operating Temperature -10℃~ 50℃(14 ~122℉

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
8www.x431.com [phone]
LAUNCH PAD VII User Manual
3 Preparations
3.1 Charging the Tablet
Warnings:
• Only use the included power adaptor to recharge the tablet. Use of any other adaptor will damage the tool. We
assume no responsibility for damage or loss resulng from using other similar adaptors other than the specied
one.
• Always charge on a non-ammable surface in a well-venlated area.
1. To check the battery power level, press and hold the
Power button about 3 seconds to turn on the tablet. 2. Power level is indicated as a percentage in the 
level drops below 10% while the tablet is on,
a Connect Charger
the screen.
1. Connect one end of the power adaptor to Type C
charging port of the tablet, and the other end to the
AC outlet.
2. The charging LED illuminates solid red and the
charging symbol will appear on the screen.
3. Once it illuminates solid green, it indicates that
the battery is fully charged and the charging
complete symbol replaces the charging sym-
bol. Disconnect the power adaptor from the AC
outlet.
3.2 Power ON/OFF
Note: If it is the rst me you use the tablet or the tablet keeps idle for a long me, it could fail to be turned on.
It results from low baery. In this case, please recharge it for a while and try to turn it on.
1. Press and hold the POWER button for about 3 sec-
onds to turn on the tablet. The system starts initial-
izing and then enters the Home screen.
2. To turn the tablet off, press and hold the
POWER button until an option menu appears.
Tap Power O󰀨.
3.3 Locator & Navigation Buttons
1234 5 6
On-screen keys and status bar are as follows:
1 Tap 󰀩
2Tap
to capture the current screen and all captured screenshots are stored in the
Screenshots folder.
3: Shows whether the SmartLink C device is properly connected or not.
4Tap
to display a list of applications that are currently running or recently used. To open
an application, tap it. To remove an application, swipe it upwards.
5 Tap

6Tap
to return to the previous screen or exit the application.

Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
9
www.x431.com [phone]
LAUNCH PAD VII User Manual
3.4 Wi-Fi Setup
The tablet has dual built-in Wi-Fi communication modules. One is used to communicate with the tablet, and




Note: Once WLAN is set as ON, the tablet will consume more power. While it keeps unused, please set it o to
save power. While WLAN is not in use, please turn it o to conserve baery power.
Connect to a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.
2. Slide the Wi-Fi switch to ON, the tablet starts search-
ing for available wireless LANs.
3. Select the desired WLAN network from the list.
-
nect directly. A password may be required for
secured networks.

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
10 www.x431.com [phone]
LAUNCH PAD VII User Manual
Disconnect from a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.2. Tap the network with a Connected status, then tap Forget.
3.5 Adjust Brightness
Note: Reducing the brightness of the screen is helpful to conserve the baery power.
1. On the home screen, tap Settings -> Display ->
Brightness level.2. Drag the slider to adjust it.
3.6 Change System Language
The tool supports multiple system languages. To change the language of the tool, please do the following:
1. On the home screen, tap Settings -> System ->
Language & input -> Languages.
2. Tap Add a language, and then choose the desired
language from the list.
3. Tap and hold the desired language and drag it
to the top of the screen and then release it, the
system will change into the target language.
3.7 Set Standby Time

system enters sleep mode to save power.
1. On the home screen, tap Settings -> Display -> Ad-
vanced -> Sleep.2. Choose the desired sleep time.

Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
11
www.x431.com [phone]
LAUNCH PAD VII User Manual
4 Initial Use
4.1 Register & Download Diagnostic Software
For new users, please follow the operation chart shown below to get started with this tool.
App Sign-up
Finish Registration

Download Software
Note: Before registering, please make sure that the tablet has a strong and stable Wi-Fi signal.
On the home screen, tap the application icon to launch it, and then tap Login on the upper right corner of
the screen. The following dialog box will pop up on the screen.
(If you are a new user, follow A to proceed.)
(If you have registered to be a member, go to B to login the system directly.)
(In case you forgot the login password, refer to C to reset a new password.)
A., tap New Registration to enter registration page.
Register,
the following
screen
will appear:

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
12 www.x431.com [phone]
LAUNCH PAD VII User Manual

Note: To exit and acvate it later, tap Skip. In this case, you can acvate it by tapping User Info -> Acvate VCI.
Tap Activate
To download the diagnostic software, tap Yes to enter the download page. Tap No to download and install it
later.
On the download page, tap Update to start downloading. To pause downloading, tap Stop. To resume it,
tap Continue. Once download is complete, the system will install the software package automatically.
Notes:
• In process of download, please make sure the tablet has a strong Wi-Fi signal. It may take several minutes to
nish it, please be paent to wait.
• To use the AutoDetect (VINScan) funcon, you have to download the corresponding diagnosc soware and
AutoSearch le.
, input your name and password, and then tap Login to enter the
main menu screen directly.
Note: The tablet has an auto-save funcon. Once the username and password are correctly entered, the system
will automacally store it. Next me you login the system, you will not be asked to input the account manually.
C., tap Retrieve password and then follow on-screen instructions to set a new
password.

Safety & Accessory
Initial UseDiagnosticsFAQ & Care Product Prole
13
www.x431.com [phone]
LAUNCH PAD VII User Manual
4.2 Job Menu

Intelligent Diagnose
This module allows you to obtain vehicle data from the cloud server to


can also check the historical repair records online through this module.
Local Diagnose To diagnose a vehicle manually.
Reset
To perform all kinds of common repair & maintenance items, including Oil






SmartLink
The SmartLink system is powerful remote diagnostics solution developed
by LAUNCH.
The system consists of SmartLink C dongle, SmartLink Service Platform

SmartLink C dongle: For technicians seeking technical assistance and
additional expertise on various vehicle issues.
SmartLink Service Platform: For SmartLink C posting assistance

: For service provider or master technician providing
technical assistance service.
TPMS
Configures this tool as a professional TPMS (Tire Pressure Monitoring

information, program tire pressure sensor and perform the TPMS relearning
 (sold

Software Update To update vehicle diagnostic software and APK.
Diagnostic History
Generally once a vehicle diagnosis is performed, the tablet will record the
every details of diagnostic process. The History function provides a quick
access to the tested vehicles and users can resume from the last operation,
without starting from scratch.
Feedback To feed back the recent 20 diagnostic logs to us for issue analysis.

Safety & Accessory Initial Use Diagnostics FAQ & Care
Product Prole
14 www.x431.com [phone]
LAUNCH PAD VII User Manual
ADAS
This function enables users to perform ADAS (Advanced Driver Assistance


function using the ADAS Activation Card.
Note: This funcon requires the diagnosc tool to work with the specic ADAS
calibraon tool(calibraon tools from other manufacturers will not be supported).
Mall This module enables you to subscribe some extra software or service
functions that are not integrated in the diagnostic tool online.
Vehicle Coverage To check the vehicle models supported on the tablet.
Maintenance Abundant maintenance data are available, which helps repair professionals
󰀩
User Info 

Other Modules 

4.3 Connections
4.3.1 Preparation
Normal testing conditions
 Turn on the vehicle power supply.
 Vehicle battery voltage range should be 9-18V or 11-36V and working voltage of the tablet is 5V.
 Throttle should be closed at its close position.



connector is required.
4.3.2 DLC Location
For Passenger Vehicles



location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray

for the location.