LAVAZZA ESPRESSO MAXI POINT User manual

Service & Sales:
1300 622 126
supported by
The Blue Pod Coffee Co.
LAVAZZA ESPRESSO MAXI POINT
OPERATION MANUAL

COMPONENTS
Power light
Coffee dispenser button
Cartridge insertion opening
See following pages for detailed images
Cartridge load lever grip
Water tank window
Dispensing spout
Cup-support rack
Used cartridge/drop
collection drawer
Rear tank cover
Steam/hot water
dispenser LED
Steam/hot water
dispenser knob
Steam/hot water arm
Power cord
On/off switch
Power cord point
Service & Sales:
1300 622 126
supported by
The Blue Pod Coffee Co.

Position the machine on a flat and stable
surface well away from water, flames and sourc-
es of heat. Unplug from the electricity mains if
plugged in. When on, never cover the machine
with tea towels or similar.
PREPARING THE MACHINE
Service & Sales:
1300 622 126
supported by
The Blue Pod Coffee Co.
Congratulations on selecting the Lavazza
Espresso Point Maxi coffee machine. With years
of experience and relentless attention to detail
Lavazza are now the world leaders in coffee
pods, producing over 20 million a day.
The Espresso Point Capsule used in this machine
is an innovative vacuum packed system. It seals
in the freshness and quality of superior Lavazza
coffee beans and produces fresh, rich tasting
coffee every time. Used with Lavazza’s state-
of- the-art Italian designed coffee machines - it
enables anyone to enjoy an excellent Italian es-
presso, at any time, anywhere.
We trust you will enjoy.
TURNING ON THE MACHINE
!
1
iUsing a water filter (optional accessory) improves
the quality of the water and increases the life of
the machine. Use the AquaAroma Crema Brita®
filter for Lavazza. To insert the filter follow the
instructions booklet that comes with the acces-
sory. It is advisable not to modify the filter default
setting.
The water must never go above the MAX
indicator line and should always remain above
the MIN marking. Only use fresh drinkable, non-
sparkling water. Warm water and other liquids
may damage the tank. Do not attempt to use the
machine if there is no water in the tank. Check that
the water level is above the MIN level indicated.
!
Fill the water tank up to the MAX level indicated
using only fresh non-sparkling drinkable water.
2
The tank may only be filled via the side opening.
3
Plug the power cord into the electricity mains
and turn on/off switch to the ON position.
4
Wait until the power light remains lit and the ma-
chine emits an acoustic sound.
5
To remove the
tank lift it and
turn slightly.
Rinse with
clean water &
replace.

PREPARING THE MACHINE
Service & Sales:
1300 622 126
supported by
The Blue Pod Coffee Co.
iRegulating the dispensing spout:
Espresso coffee: dispensing spout out, facing
down
Large cup of coffee: dispensing spout back,
facing up
Only Lavazza ESPRESSO POINT MAXI car-
tridges may be inserted into the cartridge slot
!
ENERGY SAVING
1After a period of inactivity, the machine will go
into stand-by mode and the power light will
flash.
To re-start the machine simply lift and lower the
cartridge load lever.
2
The machine is ready for use when it emits an
acoustic signal and the power light remains lit.
3
PREPARING A COFFEE
iRegulating the cup-support rack:
Espresso coffee: rack rotate 180˚
Large cup: rack down (standard position)
TECHNICAL CHARACTERISTICS
• Voltage: 220 - 240V 50Hz
• Total power: 1000W
• Capacity water tank: 1.4L
• Dimensions: Height: 36cm
Width: 23cm
Depth: 34cm
• Weight: 5,6kg
• Collection drawer capacity: 12 capsules
• Materials used for the machine body:
Thermoplastic

PREPARING COFFEE
Service & Sales:
1300 622 126
supported by
The Blue Pod Coffee Co.
Step1 - Using the lever grip,
open cartridge lever
Step2 - view empty cartridge
opening
Step3 - insert new coffee pod Step4 - close lever, coffee pod
will drop into place
DISPENSING COFFEE
1Position the cup in the centre of the rack.
Lift the cartridge load lever and insert the coffee
pod into the slot.
2
REMOVE USED PODS
iIf the cartridge does not enter, empty the used
cartridge/drop collection drawer
Always use the grip.
Do not put your fingers
or other objects
into the cartridge slot
!
Press the coffee dispensing button: the light
flashes.
3
When you have the desired quantity of coffee
in your cup, press the coffee dispenser button
again to stop the machine.
4
1Gently unclip the cartridge/drop collection
drawer.
2Remove the lid and remove the used coffee
pods. Place the drawer back into place.

TROUBLE SHOOTING
Service & Sales:
1300 622 126
supported by
The Blue Pod Coffee Co.
Problem
The machine doesn’t turn on.
LEDs flash quickly.
The cartridge load lever will not
return to a central position.
The pump is noisy.
The machine doesn’t dispense any
coffee.
Coffee is not hot enough.
The coffee does not come out or
comes out in drops.
The coffee comes out too quick-
ly, the espresso crema does not
form.
Milk or cappuccino froth doesn’t
form.
No hot water or steam
dispensed.
Possible causes Solution
Machine not plugged into the elec-
tricity source.
The machine has broken down.
Used cartridge/drop collection
drawer is full.
Incorrectly inserted cartridge.
The tank needs filling with water.
Filter inserted incorrectly.
Unsuitable temperature.
Hot water/ steam option selected.
Cartridge load lever in raised posi-
tion.
Cups are cold.
The machine was not at the cor-
rect temperature when the coffee
dispenser button was pressed.
Blocked dispensing spout.
The cartridge has already been
used.
Milk unsuitable.
Milk is not cold enough.
Steam dispensing spout is
clogged.
Clogged steam/hot water arm.
Insufficient water in the tank.
Filer not inserted correctly.
Check it is plugged in correctly.
Contact customer services or a service
centre.
Empty the used cartridge/drop collec-
tion drawer.
Lift the cartridge load lever and cor-
rectly insert the cartridge.
Refill with fresh drinkable water.
Check that the Brita® filter is correctly
inserted (see instructions supplied with
filter)
Wait until the ideal temperature has
been reached.
Return the hot/steam dispenser button
to a central position.
Lower the cartridge load lever.
Pre-heat the cups using hot water.
Wait until the machine light remains lit.
Clean the dispensing spout.
Insert a new cartridge.
Use fresh semi-skimmed milk.
Use milk at refrigerated temperature.
Clean the steam dispensing spout with
a needle and clean the arm.
Clean the arm. If the problem per-
sists clean the dispenser hole with a
thin needle, making sure that it is free
of blockages. Then turn on the ma-
chine and dispense a small quantity of
steam.
Refill with fresh drinkable water.
Check that the Brita® filter is correctly
inserted (see instructions supplied with
filter).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•