LD MAUI G3 Series User manual

MAUI® G3 SERIES
COMPACT COLUMN PA SYSTEMS
LDMAUI11G3(W) / LDMAUI28G3(W)
USER'S MANUAL
View the complete user manual online
including more languages at:
ld-systems.com/LDMAUI11G3-downloads
ld-systems.com/LDMAUI28G3-downloads

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
INFORMATION ON THIS USER MANUAL 3
USE IN ACCORDANCE WITH REGULATIONS 3
EXPLANATIONS OF TERMS AND SYMBOLS 3
SAFETY INSTRUCTIONS 4
PACKAGING CONTENT 7
CONNECTIONS, CONTROLS AND INDICATORS 11
CARE, MAINTENANCE AND REPAIR 14
OPTIONAL ACCESSORIES 15
TECHNICAL DATA 15
DISPOSAL 18
MANUFACTURER'S DECLARATIONS 18
DEUTSCH
INFORMATIONEN ZU DIESER KURZANLEITUNG 20
BESTIMMUNGSGEMÄSSER GEBRAUCH 20
BEGRIFFS- UND SYMBOLERKLÄRUNGEN 20
SICHERHEITSHINWEISE 21
ENTSORGUNG 25
HERSTELLERERKLÄRUNGEN 25
FRANCAIS
INFORMATIONS SUR CE MANUEL ABRÉGÉ 26
UTILISATION RÉGLEMENTÉE 26
EXPLICATIONS DES TERMES ET DES SYMBOLES 26
CONSIGNES DE SÉCURITÉ 27
MISE EN DÉCHETTERIE 30
DÉCLARATIONS DU FABRICANT 31
ESPAÑOL
INFORMACIÓN SOBRE ESTE MANUAL ABREVIADO 32
USO CONFORME A LA NORMATIVA 32
EXPLICACIONES DE TÉRMINOS Y SíMBOLOS 32
INSTRUCCIONES DE SEGURIDAD 33
DISPOSICIÓN 37
DECLARACIONES DEL FABRICANTE 37
POLSKI
INFORMACJE DOTYCZĄCE NINIEJSZEJ SKRÓCONEJ
INSTRUKCJI OBSŁUGI 38
STOSOWANIE ZGODNIE Z PRZEPISAMI 38
OBJAŚNIENIA TERMINÓW I SYMBOLI 38
INSTRUKCJE BEZPIECZEŃSTWA 39
DYSPOZYCJA 43
OŚWIADCZENIA PRODUCENTA 43
ITALIANO
INFORMAZIONI SU QUESTO MANUALE BREVE 44
UTILIZZO IN CONFORMITÀ ALLE NORMATIVE 44
SPIEGAZIONI DI TERMINI E SIMBOLI 44
ISTRUZIONI DI SICUREZZA 45
SMALTIMENTO 49
DICHIARAZIONI DEL PRODUTTORE 50
MAUI® G3 USER MANUAL ONLINE
Scan this QR Code to get to the download section of MAUI® G3.
Here you can get the complete User manual in the following languages:
EN, DE, FR, ES, PL, IT
www.ld-systems.com/LDMAUI11G3-downloads
www.ld-systems.com/LDMAUI28G3-downloads
COMPLETE USER MANUAL / VOLLSTÄNDIGE BEDIENUNGSANLEITUNG /
MANUEL D‘UTILISATION COMPLET / MANUAL DE USUARIO COMPLETO /
KOMPLETNY PODRĘCZNIK UŻYTKOWNIKA / MANUALE D‘USO COMPLETO

3
ENGLISH
YOU HAVE MADE THE RIGHT CHOICE!
This unit has been designed and manufactured to high quality standards to ensure many years of
trouble-free operation. This is what LD Systems stands for with its name and many years of experience
as a manufacturer of high-quality audio products. Please read this user manual carefully so that you
can quickly get the most out of your new LD Systems product.
You can find more information about LD Systems on our website WWW.LD-SYSTEMS.COM
INFORMATION ON THIS USER MANUAL
• Read the safety instructions and the entire manual carefully before turning the device on.
• Observe the warnings on the unit and in the user manual
• Always keep the operating instructions within reach.
• If you sell or pass on the unit, be sure to hand over this user manual as well, as they are an essential
part of the product.
USE IN ACCORDANCE WITH REGULATIONS
The product is a device for event technology!
The product has been developed for professional use in the field of event technology and is not suitable
for use in households! Furthermore, this product is only intended for qualified users with expertise in
handling event technology!
Use of the product outside the specified technical data and operating conditions is considered
improper use!
Liability for damage and third-party damage to persons and property due to improper use is excluded!
The product is not suitable for:
• Persons (including children) with reduced physical, sensory or mental capabilities or lack of
experience and knowledge.
• Children (children must be instructed not to play with the appliance).
EXPLANATIONS OF TERMS AND SYMBOLS
1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately
dangerous situations or conditions for life and limb.
2. WARNING:The word WARNING, possibly in combination with a symbol, is used to indicate potentially
hazardous situations or conditions to life and limb.
3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situations
or conditions that may lead to injury.
4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, is used to indicate
situations or conditions that may result in property and/or environmental damage.
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

4
This symbol indicates hazards that may cause electric shock.
This symbol indicates danger points or dangerous situations.
This symbol indicates dangers due to hot surfaces.
This symbol indicates dangers due to high volume levels.
This symbol indicates supplementary information on the operation of the product.
This symbol indicates a unit that does not contain any user-replaceable parts.
SAFETY INSTRUCTIONS
DANGER:
1. Do not open or modify the unit.
2. If your unit no longer functions properly, if liquids or objects have got inside the unit, or if
the unit has been damaged in any other way, switch it off immediately and disconnect it
from the power supply. This appliance may only be repaired by authorised specialists.
3. For protection class 1 units, the protective earth conductor must be connected correctly.
Never interrupt the protective earth conductor. Devices of protection class 2 do not have
a protective earth conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the appliance fuse.
WARNING:
1. The unit must not be put into operation if it shows obvious damage.
2. The unit should not be plugged in during installation.
3. If the mains cable of the appliance is damaged, do not operate the appliance.
4. Permanently connected mains cables may only be replaced by a qualified person.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

5
ATTENTION:
1. Do not operate the unit if it has been exposed to large temperature fluctuations
(for example, after transport). Moisture and condensation could damage the unit. Do not
switch on the unit until it has reached ambient temperature.
2. Make sure that the voltage and frequency of the mains supply match the values indicated
on the unit. If the unit has a voltage selector switch, do not connect the unit until it is set
correctly. Only use suitable mains cables.
3. To disconnect the unit from the mains at all poles, it is not sufficient to press the on/off
switch on the unit.
4. Make sure that the fuse used corresponds to the type printed on the unit.
5. Make sure that appropriate measures have been taken against overvoltage
(e.g. lightning strike).
6. Observe the specified maximum output current on units with Power Out connection. Make
sure that the total current consumption of all connected devices does not exceed the
indicated value!
7. Replace pluggable mains cables only with original cables.
DANGER:
1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of persons
(including children) with reduced physical, sensory or mental capabilities.
2. Danger from falling down! Make sure that the unit is securely installed and cannot fall
down. Use only suitable stands or mountings (especially for permanent installations).
Ensure that accessories are properly installed and secured. Make sure that applicable
safety regulations are observed.
WARNING:
1. Use the appliance only in the manner intended.
2. Operate the appliance only with the accessories recommended and intended by the
manufacturer.
3. During installation, observe the safety regulations applicable in your country.
4. After connecting the unit, check all cable routes to avoid damage or accidents,
e.g. due to tripping hazards.
5.
Be sure to observe the specified minimum distance to normally flammable materials!
If this is not explicitly stated, the minimum distance is 0.3 m.
CAUTION:
1. In the case of moving components such as mounting brackets or other moving
components, there is a possibility of jamming.
2. In the case of units with motor-driven components, there is a risk of injury from the
movement of the unit. Sudden movements of the equipment can lead to startle reactions.
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

6
ATTENTION:
1. Do not install or operate the appliance near any radiators, heat registers, stoves or other
heat sources. Always ensure that the unit is installed in such a way that it is sufficiently
cooled and cannot overheat.
2. Do not place ignition sources such as burning candles near the appliance.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the unit.
6. Observe the IP protection class as well as the ambient conditions such as temperature
and humidity according to the specification.
7. Devices can be constantly further developed. In the event of any discrepancies between
the operating instructions and the appliance labelling with regard to operating condi-
tions, performance or other appliance characteristics, the information on the appliance
always takes precedence.
8.
The unit is not suitable for tropical climates and for operation above 2000 m above sea level.
CAUTION:
Connecting signal cables can cause considerable noise. Make sure that devices connected to
the output are muted when plugged in. Otherwise, levels of noise can cause damage.
ATTENTION HIGH VOLUME AUDIO PRODUCTS!
This unit is intended for professional use.
Commercial operation of this appliance is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may
produce high sound pressure levels (SPL) which may cause hearing damage. Avoid exposure
to high volumes.
SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems, Bluetooth):
The quality and performance of wireless signal transmissions is generally dependent on the
environmental conditions.
The range and signal stability are influenced by, for example:
• Shielding (e.g. masonry, metal buildings, water)
• High radio traffic (e.g. strong W-LAN networks)
• Interference
• Electromagnetic radiation (e.g. LED video walls, dimmers)
All range specifications refer to free-field application with visual contact without interference!
The operation of transmitters is subject to official regulations. These can vary from region to
region and must be checked by the operator before commissioning (e.g. radio frequency and
transmission power).
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

7
WARNING:
Units with wireless signal transmission are not suitable for operation in sensitive areas
where radio operation can lead to possible interactions. These include, for example:
• Hospitals, health centres or other healthcare facilities that provide patient treatment with
specialist staff and equipment.
• Class I, II and III hazardous areas
• Restricted areas
• Military facilities
• Aircraft or vehicles
• Areas where the use of mobile phones is prohibited
NOTES FOR PORTABLE INDOOR EQUIPMENT
1. Temporary operation! Event equipment is generally designed for temporary use only.
2. Continuous operation or permanent installation can lead to impairment of the function
and premature ageing of the units.
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Check the completeness and integrity of the delivery and please notify your distributor immediately
after purchase if the delivery is not complete or damaged.
The packaging content of the product MAUI 11 G3 includes:
• 1x MAUI 11 G3 Subwoofer, black
• 1x MAUI 11 G3 lower column (LC), black
• 1x MAUI 11 G3 Upper Column (UC), black
• 1x power cable
• User manual
The packaging content of the product MAUI 11 G3 W includes:
• 1x MAUI 11 G3 subwoofer, white
• 1x MAUI 11 G3 lower column (LC), white
• 1x MAUI 11 G3 Upper Column (UC), white
• 1x power cable
• User manual
The packaging content of the product MAUI 28 G3 includes:
• 1x MAUI 28 G3 Subwoofer, black
• 1x MAUI 28 G3 lower column (LC), black
• 1x MAUI 28 G3 Upper Column (UC), black
• 1x power cable
• User manual
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

8
The packaging content of the product MAUI 28 G3 W includes:
• 1x MAUI 28 G3 Subwoofer, white
• 1x MAUI 28 G3 lower column (LC), white
• 1x MAUI 28 G3 Upper Column (UC), white
• 1x power cable
• Operating instructions
PROPERTIES
MAUI 11 G3 (W)
• Powerful bass reproduction with 2 x 8" subwoofer
• Balanced mids thanks to 6 x 3.5" full-range speakers
• Precise and silky highs with 2 x 1" high-frequency drivers
• Cardioid column for controlled low-mid and midrange sound dispersion
• BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion
• Optimised bass-reflex design improves bass response and reduces air flow noise
• Can be combined with an additional MAUI® 11 G3 subwoofer for increased low end
or for cardioid subwoofer setups
• New Dynx® DSP for distortion-free sound even at maximum volume
• AAC coding for HD Bluetooth® 5.0 streaming
• Automatic setup detection for quick and easy operation
• Fast and simple assembly without stands or cables
• Rugged birch plywood subwoofer housing with durable polyurea-coating
• Lightweight, powder-coated aluminium column housing
MAUI 28 G3 (W)
• Powerful and deep bass reproduction with 12" subwoofer
• Balanced mids thanks to 12 x 3.5" full-range speakers
• Precise and silky highs with 2 x 1" high-frequency drivers
• Cardioid column for controlled low-mid and midrange sound dispersion
• BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion
• HF waveguide and midrange phase plugs for homogeneous dispersion
• Optimised bass-reflex design improves bass response and reduces air flow noise
• Can be combined with an additional MAUI® 28 G3 subwoofer for increased low end
or for cardioid subwoofer setups
• New Dynx® DSP for distortion-free sound even at maximum volume
• AAC coding for HD Bluetooth® 5.0 streaming
• Automatic setup detection for quick and easy operation
• Fast and simple assembly without stands or cables
• Rugged birch plywood subwoofer housing with durable polyurea-coating
• Lightweight, powder-coated aluminium column housing
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

9
ASSEMBLY AND CABLING
DANGER: Always place the speaker system in a suitable location on a sufficiently stable,
level and horizontal surface. Make sure that the speaker system cannot fall off the edge
of a stage (e.g. due to vibration). There is a risk that units that have not been set up and
positioned correctly will fall over or down. This can seriously injure or kill people.
CONSTRUCTION
The LD Systems MAUI 11 G3 and MAUI 28 G3 column systems each consist of three components:
AThe subwoofer with integrated electronics for all system components.
BThe lower column element with the connections on the bottom and top (Lower Column – LC).
CThe upper column element with the connection on the underside (Upper Column – UC).
Place the subwoofer in the desired location, plug the lower
column element (LC) onto the connecting element on the top of the subwoofer 1and then the upper
column element (UC) onto the lower column element 2. Guide bolts made of stainless steel facilitate
correct assembly and ensure a secure hold at the same time. The column elements are automatically
supplied with the corresponding audio signals when the system components are plugged together
using custom-made multipin connectors.
C
B
A
Upper Column - UC
Lower Column - LC
Subwoofer
1
2
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

10
WIRING EXAMPLES
1
2
3
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

11
CONNECTIONS, CONTROLS AND INDICATORS
The connector panels of the MAUI 11 G3 and MAUI 28 G3 column systems are identical and are located on
the rear of the subwoofers.
LD MAUI LINE PANEL V5 26.07.22
6 7
8
9
3 4 5
5
1 2
10
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

12
1 POWER INPUT
IEC mains socket with integrated fuse holder. A suitable mains cable is included in the packaging content.
IMPORTANT NOTE: Replace the fuse only with one of the same type and rating. Pay attention to the imprint on
the housing. If the fuse blows repeatedly, please contact an authorised service centre.
2 POWER
On/off switch. Always switch on the speaker system as the last unit in the signal chain and switch it off
again as the first unit.
3IN L - R
Stereo line input with two combo jacks (3-pin XLR / 6.3 mm jack) suitable for both balanced and unbal-
anced cabling.
4THRU L - R
Stereo line output with two male 3-pin XLR sockets (output signal = input signal).
5SUB OUT
Balanced line output with a male 3-pin XLR socket for driving a follower subwoofer (MAUI 11 G3 or
MAUI 28 G3 subwoofer). Follower subwoofer: Use either line input IN L or R for signal control.
Both level controls MAIN and SUB as well as the Bluetooth unit are deactivated when the MAUI 11 G3 or
MAUI 28 G3 subwoofer is used as a follower subwoofer (speaker columns not mounted).
The description of the Cardioid setup and the expansion with a follower subwoofer without
Cardioid function can be found at 10 CARDIOID ON / OFF.
6MAIN
Adjust the overall volume. The subwoofer volume is also controlled according to the setting on the SUB
volume control. Turning to the right increases the volume, turning to the left decreases it.
7SUB
Volume control for the subwoofer. Turning to the right increases the volume, turning to the left
decreases it.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

13
8STATUS DISPLAY
PROTECT:
The PROTECT indicator lights up permanently if the system is overloaded or overheats.
The integrated amplifiers are automatically muted. After reaching normal operating conditions,
the unit returns to normal operating mode after a few minutes and the PROTECT indicator goes out.
LIMIT:
Lights up when the speaker system is operated in the upper limit range. A short flash of the LIMIT
display is not critical. To protect the system, an excessive signal level is gently reduced by the integrated
limiter. If the LIMIT indicator is lit for a longer time or continuously, reduce the volume level. Failure to do
so may result in distorted sound reproduction and damage to the speaker system.
SIGNAL:
Indicator for the mixer sum signal. The signal acquisition takes place before the MAIN volume control.
POWER:
Lights up when the subwoofer is correctly connected to the mains and switched on.
FOLLOW:
Lights up when the column elements are not installed on the subwoofer. The two level controls
MAIN and SUB as well as the Bluetooth unit are deactivated in this case. Use as a follower subwoofer.
9HOLD TO LINK
Press the HOLD TO LINK button for about 3 seconds to put the internal Bluetooth module into pairing
standby, by doing so you also disconnect from a previously paired device.
The Bluetooth symbol flashes for the duration of the pairing readiness. Activate Bluetooth on your
playback device (smartphone, tablet, etc.) and select MAUI 11G3 or MAUI 28G3 in the Bluetooth menu.
Pairing now takes place automatically; as soon as the devices are paired, the Bluetooth symbol lights
up permanently. Audio playback via Bluetooth can now be started.
10 CARDIOID ON / OFF
CARDIOID ON:
With the help of another subwoofer (same model) and the Cardioid function,
a subwoofer array with directional radiation can be realised.
The follower subwoofer is placed upright and turned horizontally by 180° directly next
to the main subwoofer (MAIN). Activate the Cardioid function in the follower subwoofer
(CARDIOID ON, see wiring example 3).
CARDIOID OFF:
Deactivate the cardioid function in the follower subwoofer (CARDIOID OFF) and place it
upright in the same orientation directly next to the main subwoofer (MAIN).
11 COOLING FINS
To prevent damage to the unit, do not cover the cooling fins on the back and ensure
that air can circulate freely.
LD MAUI LINE PANEL V5 26.07.22
LD MAUI LINE PANEL V5 26.07.22
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

14
CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the unit in the long term, it must be regularly maintained and
serviced as required. The need for care and maintenance depends on the intensity of use and the
environment.
We generally recommend a visual inspection before each commissioning. Furthermore, we recommend
that you carry out all the maintenance measures listed below every 500 hours of operation or, in the
case of less intensive use, after one year at the latest. Defects caused by insufficient care may result in
limitations of the warranty claims.
CARE (CAN BE CARRIED OUT BY THE USER)
WARNING! Before carrying out any maintenance work, disconnect the power supply and, if
possible, all connections to the unit.
NOTE! Improper care can lead to impairment or even destruction of the unit.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the unit.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make
sure that damage to the unit is prevented (e.g. fans must be blocked for this case).
3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
4. In general, no cleaning agents, disinfectants or agents with an abrasive effect may be used for
maintenance, otherwise the surface finish is likely to be impaired. Especially solvents, such as
alcohol, can impair the function of housing seals.
5. Units should generally be stored in a dry place and protected from dust and dirt.
MAINTENANCE AND REPAIR (BY QUALIFIED PERSONNEL ONLY)
DANGER! There are live components in the unit. Even after disconnecting from the mains,
residual voltage may still be present in the unit, e.g. due to charged capacitors.
NOTICE! There are no assemblies in the unit that require maintenance by the user.
NOTICE! Maintenance and repair work may only be carried out by specialist personnel
authorised by the manufacturer. If in doubt, contact the manufacturer.
NOTICE! Improperly performed maintenance work may affect the warranty claim.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

15
OPTIONAL ACCESSORIES
MAUI 11 G3 (W)
• Castor board for MAUI 11 G3 (W)
Article number LDM11G3CB
• Padded carrying bag for MAUI 11 G3 (W) column speaker
Article number LDM11G3SATBAG
• Padded protective cover for MAUI 11 G3 (W) subwoofer
Article number LDM11G3SUBPC
MAUI 28 G3 (W)
• Castor board for MAUI 28 G3 (W)
Article number LDM28G3CB
• Padded carrying bag for MAUI 28 G3 (W) column speaker
Part number LDM28G3SATBAG
• Padded Protective Cover for MAUI 28 G3 (W) Subwoofer
Part Number LDM28G3SUBPC
TECHNICAL DATA
Item number LDMAUI11G3(W) LDMAUI28G3(W)
General
Product type PA Complete Systems PA Complete Systems
Type Powered Powered
Colour Black: LDMAUI11G3
White: LDMAUI11G3W
Black: LDMAUI28G3
White: LDMAUI28G3W
Max. SPL (Peak) 125 dB 127 dB
Frequency response (-10dB) 39 Hz – 20 kHz 37 Hz – 20 kHz
Dispersion angle (H x V) 120° x 30° 120° x 30°
Total Height 2052 mm 2052 mm
Weight 30.7 kg 35.4kg
Features Bluetooth Audio Streaming,
Cardioid column, DSP-based Signal
Processing, Excellent Sound Dispersion,
Mono/ Stereo Application
Bluetooth Audio Streaming,
Cardioid column, DSP-based Signal
Processing, Excellent Sound Dispersion,
Mono/ Stereo Application
Subwoofer
Woofer dimensions 2 x 8" 12"
Woofer dimensions (mm) 2 x 203 mm 305 mm
Woofer magnet Ferrite Ferrite
Woofer brand Custom-made Custom-made
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

16
Item number LDMAUI11G3(W) LDMAUI28G3(W)
Woofer voice coil 2" 3"
Woofer voice coil (mm) 50.8 mm 76.2 mm
Cabinet construction Bass Reflex Bass Reflex
Housing material 15 mm Birch Plywood 15 mm Birch Plywood
Cabinet surface Polyurea Polyurea
Dimensions Subwoofer
(W x H x D)
305 x 607 x 403 mm 370 x 527 x 472 mm
Subwoofer weight 20.5 kg 22.8 kg
Mid/Hi System
Midrange dimensions 6 x 3.5" 12 x 3.5"
Midrange dimensions (mm) 6 x 89 mm 12 x 89 mm
Midrange magnet Ferrite Ferrite
Midrange brand Custom-made Custom-made
Midrange voice coil 0.75" 0.75"
Midrange voice coil 19 mm 19 mm
Tweeter dimensions 2 x 1" 2 x 1"
Tweeter dimensions (mm) 2 x 25.4 mm 2 x 25.4 mm
Tweeter magnet Neodymium Neodymium
Tweeter brand Custom-made Custom-made
Tweeter voice coil 1" 1"
Tweeter voice coil (mm) 25.4 mm 25.4 mm
Wave Guide CD Waveguide CD Waveguide
Loudspeaker inputs 1 1
Speaker input connections Custom-made multipin Custom-made multipin
Cabinet construction mid/high Passive Cardioid Passive Cardioid
Mid/Hi system cabinet
material
Aluminium Aluminium
Mid/Hi system cabinet surface Powder-coated Powder-coated
Mid/Hi system width 103 mm 103 mm
Mid/Hi system height 1460 mm 1540 mm
Mid/Hi system depth 135 mm 135 mm
Mid/Hi system weight 10.2 kg 12.6 kg
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

17
Item number LDMAUI11G3(W) LDMAUI28G3(W)
Amplier module (integrated in subwoofer)
Amplifier Class D Class D
System output (RMS) 730 W 1030 W
System output (Peak) 1460 W 2060 W
Protective circuits DC protection, Multiband limiter,
short circuit, thermal protection
DC protection, Multiband limiter,
short circuit, thermal protection
Cooling Convection Convection
Controls Bluetooth HOLD TO LINK button, Cardioid
On/Off, Main level, Power On/Off, Sub level
Bluetooth HOLD TO LINK button, Cardioid
On/Off, Main level, Power On/Off, Sub level
Indicators Bluetooth, Cardioid On/Off, Follower
mode, Limit, Power, Protect (protection
circuit engaged), Signal, Subwoofer Mode
Bluetooth, Cardioid On/Off, Follower
mode, Limit, Power, Protect (protection
circuit engaged), Signal, Subwoofer Mode
Mains connector IEC power cable (included) IEC power cable (included)
Operating voltage 100 V AC – 120 V AC, 50 – 60 Hz,
220 V AC – 240 V AC, 50 – 60 Hz
100 V AC – 120 V AC, 50 – 60 Hz,
220 V AC – 240 V AC, 50 – 60 Hz
Fuse T 3.15AL / 250 V T 5AL / 250 V
Power consumption 300 W 400 W
Ambient temperature
(operating)
0 – 40 °C 0 – 40 °C
Relative Humidity < 80% (non-condensing) < 80% (non-condensing)
Line Inputs 2 2
Line Input Connectors Combo XLR / TRS Combo XLR / TRS
Line Outputs 1 Sub OUT, 2x THRU 1 Sub OUT, 2x THRU
Line Output Connectors XLR male XLR male
Number of speaker outputs 1 1
Loudspeaker Output Connectors Custom-made multipin Custom-made multipin
Bluetooth Standard A2DP A2DP
Bluetooth Audio Decoder AAC, SBC AAC, SBC
DSP characteristics
Bit depth AD/DA converter 24 bit 24 bit
Sampling frequency 48 kHz 48 kHz
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

18
DISPOSAL
Packaging:
1. Packaging can be fed into the recycling system via the usual disposal channels.
2. Please separate the packaging according to the disposal laws and recycling regulations in
your country.
Device:
1. This appliance is subject to the European Directive on Waste Electrical and Electronic
Equipment as amended. WEEE Directive Waste Electrical and Electronical Equipment. De-
vices and rechargeable batteries do not belong in household waste. The old device and/
or rechargeable batteries must be disposed of via an authorized disposal company or a
municipal disposal facility. Please observe applicable regulations in your country!
2. Observe all disposal laws applicable in your country.
3. As a private customer, you can obtain information on environmentally friendly disposal
options from the dealer from whom the product was purchased or from the relevant
regional authorities.
MANUFACTURER'S DECLARATIONS
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach / E-Mail [email protected] / +49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_LD_SYSTEMS.pdf.
In case of service, please contact your sales partner.
UKCA-CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following guidelines
(where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulation 2012 (SI 2012/3032)
Radio Equipment Regulations 201 7(SI 2016/2015)
UKCA-DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC Regulation 2016 or
RoHS Regulation can be requested at [email protected]. Products that are subject to the Radio
Equipments Regulations 2017 (SI2017/1206) can be downloaded from
www.adamhall.com/compliance/
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH

19
RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
CE COMPLIANCE
Adam Hall GmbH states that this product meets the following guidelines (where applicable):
Low Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS (2011/65/EU)
RED (2014/53/EU)
CE DECLARATION OF CONFORMITY
Declarations of Conformity for products subject to the LVD, EMC, RoHS Directives
can be requested at [email protected].
Declarations of conformity for products subject to the RED directive
can be downloaded from www.adamhall.com/compliance/.
EU DECLARATION OF CONFORMITY
Hereby, Adam Hall GmbH declares that this radio equipment type is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.adamhall.com/compliance/
Misprints and errors as well as technical or other changes are reserved!
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI

20
DEUTSCH
SIE HABEN DIE RICHTIGE WAHL GETROFFEN!
Dieses Gerät wurde unter hohen Qualitätsanforderungen entwickelt und gefertigt, um viele Jahre einen
reibungslosen Betrieb zu gewährleisten. Dafür steht LD Systems mit seinem Namen und der langjähri-
gen Erfahrung als Hersteller hochwertiger Audioprodukte. Bitte lesen Sie diese Bedienungsanleitung
sorgfältig, damit Sie Ihr neues Produkt von LD Systems schnell optimal einsetzen können.
Mehr Informationen zu LD Systems finden Sie auf unserer Internetseite WWW.LD-SYSTEMS.COM
INFORMATIONEN ZU DIESER KURZANLEITUNG
Diese Kurzanleitung ersetzt nicht die ausführliche Bedienungsanleitung.
Lesen Sie bitte immer zuerst die vollständige und produktrelevante
Bedienungsanleitung vor Inbetriebnahme. Beachten Sie auch die zusätzlichen
Sicherheitshinweise in der vollständigen Bedienungsanleitung des Produkts!
Die vollständige Bedienungsanleitung finden Sie unter:
www.ld-systems.com/LDMAUI11G3-downloads
www.ld-systems.com/LDMAUI28G3-downloads
bzw. können Sie diese abrufen unter dem QR Code.
BESTIMMUNGSGEMÄSSER GEBRAUCH
Bei dem Produkt handelt es sich um ein Gerät für die Veranstaltungstechnik!
Das Produkt ist für den professionellen Einsatz im Bereich der Veranstaltungstechnik entwickelt
worden und ist nicht für die Verwendung in Haushalten geeignet!
Weiterhin ist dieses Produkt nur für qualifizierte Benutzer mit Fachkenntnissen im Umgang mit
Veranstaltungstechnik vorgesehen!
Die Benutzung des Produkts außerhalb der spezifizierten technischen Daten und Betriebsbedingungen
gilt als nicht bestimmungsgemäß!
Haftung für Schäden und Drittschäden an Personen und Sachen durch nicht bestimmungsgemäßen
Gebrauch ist ausgeschlossen!
Das Produkt ist nicht geeignet für:
• Personen (einschließlich Kinder) mit eingeschränkten körperlichen, sensorischen oder geistigen
Fähigkeiten oder mangelnder Erfahrung und Kenntnis.
• Kinder (Kinder müssen angewiesen werden, nicht mit dem Gerät zu spielen).
BEGRIFFS- UND SYMBOLERKLÄRUNGEN
1. GEFAHR: Mit dem Wort GEFAHR, evtl. in Kombination mit einem Symbol, wird auf unmittelbar
gefährliche Situationen oder Zustände für Leib und Leben hingewiesen.
2. WARNUNG: Mit dem Wort WARNUNG, evtl. in Kombination mit einem Symbol, wird auf potentiell
gefährliche Situationen oder Zustände für Leib und Leben hingewiesen.
3. VORSICHT: Mit dem Wort VORSICHT, evtl. in Kombination mit einem Symbol, wird auf Situationen
oder Zustände hingewiesen, die zu Verletzungen führen können.
4. ACHTUNG: Mit dem Wort ACHTUNG, evtl. in Kombination mit einem Symbol, wird auf Situationen
oder Zustände hingewiesen, die zu Sach- und/oder Umweltschäden führen können.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH