LeapFrog LeapStory Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003677-000 US

2
CAUTION-ELECTRIC TOY: Not recommended
for children under 3 years of age. As with all electric
products, precautions should be observed during
handling and use to prevent electric shock.
MISE EN GARDE : JOUET ÉLECTRIQUE
Déconseillé aux enfants de moins de 3 ans. Comme
avec tous les produits électriques, des précautions
doivent être observées lors de la manipulation et de
l'utilisation pour éviter les chocs électriques.

3
INTRODUCTION
Thank you for purchasing the LeapStory™ device! Get ready
to enter a magical world of storytelling, music and learning!
On/Off Switch
Volume Control
USB Port
Record Button
Scout Button
Projector Lens
Book
Button
Sleepytime
Recorded
Story
Light Options
Button
Story Timer
Button
Classics
Learning
Songs
Play/Pause
Button
Myths, Legends
and Fables
Arrow Buttons
LED Screen
Projector Focus Ring

4
INCLUDED IN THIS PACKAGE
• One LeapStoryTM device
• One AC adapter
• One USB cord
• One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les
produits d’emballage tels que rubans adhésifs, feuilles de plastique,
attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
ACTIVATE NORMAL PLAY MODE
This product is in Try-Me mode in the
packaging. To activate normal play mode,
please complete the following steps:
1. Slide the On/Off Switch to the Off
position.
2. Slide the On/Off Switch to the On
position to activate normal play mode.

5
Unlock the packaging locks:
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks
and discard.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery cover.
4. Install 4 new AA (AM-3/LR6) batteries into the battery box as
illustrated. (The use of new alkaline batteries is recommended
for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

6
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

7
AC Adapter Safety
CAUTION:Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 3 years. Misuse of
AC adapter can cause electric shock.
• Connection of the AC adapter to the wall outlet should be
performed only by an adult or child 8+ years of age.
• The AC adapter is not intended to be used as a toy, and the use
of the AC adapter shall be under the full supervision of parents.
• As with all electrical products, precautions should be
observed during handling and use to prevent electrical shock.
• The AC adapter may become warm during normal use.
Always allow adequate ventilation and use care when
handling the AC adapter.
• Do not connect or disconnect with wet hands.
• The AC adapter should be periodically examined for
conditions that may result in the risk of fire, electrical shock
or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such
conditions, the cord must not be used until the damage is
repaired.
The AC adapter cannot be replaced; if the cord is damaged,
dispose of the AC adapter in accordance with your local
electrical product recycling regulations.
Unplug the AC Adapter if any of the following
conditions exist:
• The AC adapter, plug or USB cord has become frayed or
damaged.
• The AC adapter is exposed to rain, liquid or excessive
moisture.
• The AC adapter enclosure has become damaged.
• You suspect the AC adapter needs service or repair.

8
To Clean AC Adapter
Disconnect it from the wall and clean with a slightly damp
cloth. Do not immerse in water or use soap or other chemicals.
Allow to dry before reusing. Do not connect to the AC outlet
if wet or damaged.
AC Adapter Electrical Ratings: Input: 120V~60Hz, 150mA, AC;
Output: 5V 1000mA, DC.
Accessories
Please read all safety instructions for any accessories or other
products before using with the LeapStory™ device. LeapFrog
is not responsible for the operation of third-party accessories
or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe
condition. If there is any damage or broken parts, remove toy
from use.
WARNING:The AC adapter or USB cord could be a strangulation
hazard. Not for children under 3 years.

9
PRODUCT FEATURES
1. On/Off Switch
Slide the On/Off Switch to turn the toy
On and Off.
2. Volume Control
Turn the dial left or right to adjust the
volume level.
3. USB Port
If desired, insert the supplied AC adapter
to power the device using a wall outlet.
To download free stories, follow the
instructions in the “Downloadable
Content” section later in this guide.
4. Record Button
Slide the button to record your own
story. When instructed, press the Scout
Button to start recording. You will
have 10 minutes of recording time. The
newly recorded story will overwrite the
previous one.
To hear your recorded story, press
the Book Button to navigate to the
Recorded Story category.

10
5. Projector
When the LeapStory™ device is turned
on, the projector will be automatically
activated. The projector will show images
on the ceiling in a darkened room.
To focus these images, turn the Projector
Focus Ring. If desired, tilt the projector
forwards or backwards to adjust the
position of the images on the ceiling.
To turn the projector off, press the Light
Options Button.
6. Projector Focus Ring
Twist clockwise and counterclockwise to
adjust the focus of the projector images.
7. Book Button
Press to choose a category. Categories
include: Classics; Myths, Legends and
Fables; Sleepytime; Learning Songs and
Recorded Story.
8. Play/Pause Button
Press to hear a selected story, poem or song.
Press again to pause.

11
9. Light Options Button
Press to choose a light option. Options
include:
1. Night-Light On
2. Projector and Night-Light On
3. All Off
4. Projector On
10. Story Timer Button
Press to listen to a set amount of stories
or songs before the device goes to sleep.
It is best to use the AC adapter when
listening for long durations.
11. Automatic Shut Off
To save power, the device will be turned off automatically
after about 40 seconds if a story or song is not playing.
It’s recommended to plug the LeapStory™ device into a wall
outlet using the supplied AC adapter.
ACTIVITIES
Listen to a Story, Poem or Song
Press the Book Button to choose a category. After selecting
a category, press the Arrow Buttons to toggle through the
story options. Stories will play automatically after their titles
are announced.

12
Included Stories, Poems and Songs
Classic Stories and Poems
1. The Tale of Peter Rabbit
2. The World of Dinosaurs
3. Briar Rose
4. The Frog Prince
5. The Three Little Pigs
6. Little Red Riding Hood
7. The Little Engine That Could
8. Rumpelstiltskin
9. Cinderella
10. The Little Mermaid
11. Goldilocks and the Three Bears
12. The Rocking Horse
13. Hansel and Gretel
14. The Three Billy Goats Gruff
15. Beauty and the Beast
16. The Gingerbread Man
17. The Little Red Hen
18. The Golden Windows
19. The Fairy
20. A Wise Old Owl
21. Baa, Baa, Black Sheep
22. Casey at the Bat
23. Hey Diddle, Diddle
24. I’m a Little Teapot
25. Itsy Bitsy Spider
26. Jack and Jill
27. Jack Be Nimble
28. Little Bo Peep

13
29. Pat-a-Cake, Baker’s Man
30. Rock-a-Bye Baby
31. Round and Round the Garden
32. Star Light, Star Bright
33. The Noble Duke of York
34. The Owl and the Pussy Cat
35. This Little Piggy
36. Pease Porridge Hot
Myths, Legends and Fables
1. The Tortoise and the Hare
2. The Elves and the Shoe Maker
3. The Midas Touch
4. Theseus and the Minotaur
5. The Fox and the Crow
6. The Emperor’s New Clothes
7. The Wind and the Sun
8. The Legend of John Henry
9. Paul Bunyan and Babe the Big, Blue Ox
10. Robin Hood and the Golden Arrow
11. Anansi and the Turtle
12. The Lucky Drum
13. Clumsy Kaito
14. The Boy Who Cried Wolf

14
Sleepytime Lullabies and Stories
1. Hush Little Baby (Lullaby)
2. Frère Jacques (Lullaby)
3. Brahm’s Lullaby (Lullaby)
4. Peaceful Waves – Music of the Sea
5. Rainfall in the Forest
6. Animals ‘Round the World Go to Sleep at Night (Relaxing story)
7. It’s Bedtime Solar System (Relaxing story)
8. Owl Helps Bunny Go to Sleep (Relaxing story)
9. Ocean Dreams (Relaxing story)
10. Moonlight Music Meditation (Relaxing story)
Learning Songs
1. Counting 1 to 10
2. All The Colors Of The Rainbow
3. Five Little Birdies
4. The Days of the Week
5. Every Letter Makes a Sound
6. 10 Grapes
7. Hello Around The World
8. Knick Knack Doggie Snack Give a Dog a Bone
9. London Bridge is Falling Down
10. My First Counting Song
11. Old MacDonald Had a Farm
12. On the Farm We Can Play
13. Pat-a-Cake, Baker’s Man
14. Playground Rhymes
15. Pretend With Me
16. Safety Song

15
17. The Shapes Song
18. We’re On Our Way
19. Being a Puppy
20. The Muffin Man
21. Nap Time is Here
22. Good Night, My Sleepy Friend
23. Twinkle, Twinkle Little Star
Downloadable Content
Download free stories, songs and poems using your computer
and add them to your LeapStory™ device.
1. Power Up and Connect
Locate the On/Off Switch at the back of your LeapStory™
device and slide it to the On position. Then, connect the
device to your computer via the included USB cord.
2. Set Up
Install the LeapFrog®Connect LeapStory™ application on
your PC or Mac at leapfrog.com/connect.
3. Download
Follow the on-screen instructions to download and install a
download pack.
4. Play and Learn!
Eject the LeapStory™device and your child is ready to play!
Warning: Do not power off the device or disconnect the
USB cord while the device is being updated.

16
System Requirements for Computer Connection
High-speed Internet connection; monitor resolution of 1024 x
768; available USB port; 1 GB of RAM; 500 MB free disk space.
PC Requirements: Pentium®4 or equivalent (2 GHz processor or
faster recommended); Windows®7, Windows®8, or Windows®
10 operating system with latest service pack.
Mac Computer Requirements: Intel®-based Apple computer
(1 GHz processor or faster recommended); Mac OS X 10.11+
operating system software.
Microsoft®and Windows logos are trademarks of Microsoft
Corporation in the United States and other countries. MAC,
APPLE, and MAC OS are trademarks of Apple Inc., registered
in the U.S. and other countries.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
5. Do not disassemble the device. If a problem occurs, remove and
replace the batteries to reset the device, or try new batteries.
6. Do not drop the unit on a hard surface and do not expose
the unit to or immerse it in water.
TROUBLESHOOTING
Check this section if you experience difficulty with operating the
LeapStory™ device.

17
Problem Possible Cause Correction
Your
LeapStoryTM
device has
stopped
working or
does not
turn on
Incorrect battery
polarities.
Ensure that the batteries are
installed correctly.
Weak batteries. Replace with new batteries.
AC adapter
connection
problem.
Ensure that the AC adapter
connection is good.
Cannot
download
additional
stories
The LeapFrog®
Connect LeapStory™
application is not
installed.
Install LeapFrog®Connect
LeapStory™ application
on your PC or Mac at
leapfrog.com/connect.
The LeapFrog®
Connect
LeapStory™
application is not
working.
Disconnect the LeapStory™
device and restart the LeapFrog®
Connect LeapStory™ application.
Then, reconnect the LeapStory™
device to your computer again
using the USB cord.
Cannot find
any story in
the device
The data in the
LeapStory™ device
has crashed.
Connect the LeapStory™
device to your computer, run the
LeapFrog®Connect LeapStory™
application, select “Reset” under
Settings and your LeapStory™
device will be restored.
Your recorded story will be erased.
Projector
not clear
Projector is out of
focus.
Rotate the Projector Focus Ring
clockwise or counterclockwise to
adjust the focus of projection display.
Projector lens is dirty. Wipe the lens with a clean, dry cloth.
Projected
images not
visible
Room is not dark
enough.
Turn off lights to darken room.

18
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.

19
DISCLAIMER AND LIMITATION OF LIABILITY
LeapFrog Enterprises, Inc. and its suppliers assume no
responsibility for any damage or loss resulting from the use of
this guide. LeapFrog Enterprises, Inc. and its suppliers assume
no responsibility for any loss or claims by third parties that may
arise through the use of this product. LeapFrog Enterprises,
Inc. and its suppliers assume no responsibility for any damage
or loss caused by deletion of data as a result of malfunction,
dead battery, or repairs.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

20
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
Supplier’s Declaration of Conformity
Trade Name: LeapFrog®
Model: 6080
Product Name: LeapStoryTM
Responsible Party: LeapFrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Website: leapfrog.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)