LeapFrog PAW PATROL RYDER'S PLAY & LEARN PUP PAD User manual

Instruction Manual
This manual contains important information. Please save it for future reference.
RYDER'S PLAY & LEARN
PUP PAD

2
INTRODUCTION
Thank you for purchasing the PAW Patrol Ryder’s Play and Learn
Pup Pad! Help solve problems around Adventure Bay, just like the
pups in the show. This screen-free tablet with interchangeable
cards teaches 20+ essential preschool topics like letters, numbers,
weather, and problem solving. Each card has multiple ways to play
and learn with the PAW Patrol!
Off/Low/High
Volume Switch
Touch and
Learn Mode
Quiz Mode
Activity
Mode
Card
Insertion
Area
Card Storage Area
LED LightsCard Reader
Card Storage
Lock

3
INCLUDED IN THE PACKAGE
• 1 Ryder’s Play and Learn Pup Pad
• 10 double-sided cards
• 1 Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE :
Il est conseillé de sauvegarder ce manuel d’utilisation car il
comporte des informations importantes.
Pull out the packaging locks and
discard.
Rotate the packaging locks 90
degrees counterclockwise.
Unlock the Packaging Locks

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the back of the unit. Use a
screwdriver to loosen the screw and then open the battery
cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un
adulte. Tenir les piles ou accumulateurs hors de portée des
enfants.

HOW TO PLAY
1. Insert Card
2. Card Storage
6

PRODUCT FEATURES
1. Off/Low/High Volume Switch
Slide the Off/Low/High Volume Switch
to Low or High to turn the device
on and select the volume.
2. Touch and Learn Mode Button
Touch and Learn is the default
mode upon start up or after a card
is inserted. In this mode, touch the
images on the card to explore. This
mode introduces new words and
preschool concepts through open
exploration. When another mode is
active, press this button at any time to
return to this mode.
3. Quiz Mode Button
Press the Quiz Mode Button to play
a “Find It” game with questions that
reinforce the learning from the Touch
and Learn mode. Upon completion of
a game round, the toy automatically
returns to the default Touch and Learn
mode. Press the Quiz Mode Button
again for another round of Find It.
7

4. Activity Mode Button
Press the Activity Mode Button
to play an activity that reinforces
learning or introduces new concepts.
Activities vary by card including
matching games, music making, story
sequencing, and more.
6. Automatic Shut-Off
To preserve battery life, Ryder’s Play and Learn Pup Pad
will automatically go into sleep mode after approximately
three minutes without input. To turn the unit on again,
please switch the Off/Low/High Volume Switch to the
Off position and then back to either the Low or High
position again.
8

9
CARDS
Ten double-sided cards feature one to two learning topics
across a variety of preschool learning skills. All 10 double-
sided cards can be stored in the Card Storage Area on the
back of the product. In addition, the device includes a built-in
card that offers a sampling of different learning topics across
the included cards.
Cleanup Time
Curriculum: Letters A - M
Pups’ ABCs
Curriculum: Letters A - M
Pups Around Adventure Bay
(built-in card)

10
Pups’ ABCs
Curriculum: Letters N - Z
Coastal Cleanup
Curriculum: Letters N - Z
Counting with Mr. Porter
Curriculum: Numbers and
Counting
Counting Cows
Curriculum: Numbers and
Number Names
Yelp for Help
Curriculum: Helping
and Problem Solving
Pups on a Path
Curriculum: Logic and
Reasoning

11
Jam with DJ Rubble
Curriculum: Music
Pups’ Tales
Curriculum: Story
Sequencing
Fun in the Forecast
Curriculum: Weather
Pups’ Playtime
Curriculum: Vocabulary
Opposites
Curriculum: Opposites
Pattern Pup Pup Boogie
Curriculum: Pattern
Recognition

12
Pups Pack and Sort
Curriculum: Sorting
Pups Save the Night
Curriculum: Problem
Solving
Color with Marshall
Curriculum: Colors and
Color Mixing
Skye’s Day
Curriculum: Time Concepts
and Daily Routines
Pups Building Shapes
Curriculum: Shapes
Stepping Shapes
Curriculum: Shapes

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use
again.
5. If the unit still does not work, install a new set of batteries.
13

Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
14

CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
15

16
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6178
Product Name: PAW Patrol Ryder’s Play and Learn Pup Pad
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell St., Suite 500
Emeryville, CA 94608
Website: leapfrog.com
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A
service representative will be happy to help you.

LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
IM-617800-000
Version:0
Read our complete warranty policy online at
leapfrog.com/legal
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca