LeapFrog My First Learning Tablet Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.

2
Off/Low/High Volume
Control Switch
Dock Icons
INTRODUCTION
Thank you for purchasing My First Learning TabletTM! Learning is
a tap away! Kids can learn about colors, letters, numbers, music
and more on a tablet that’s made just for them. This interactive
toy lets children role-play with a tablet just like mom and dad!
Home Button
Mode Selector
Activity
Icons

3
INCLUDED IN THIS PACKAGE
• OneMy First Learning TabletTM
• Oneparent’sguide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE:
Please keep this parent’s guide as it contains important
information.
NOTE:
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90 degrees counterclockwise.
Pull out the packaging locks and discard.

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery
cover.
4. Install 3 new AAA (AM-4/LR03) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

5
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Use only batteries of the same or equivalent type as
recommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging
(if removable).
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.
MISE EN GARDE
• Utilisezdenouvellespilesalcalinespouruneperformance
maximale.
• Seulesdespilesdutyperecommandédoiventêtreutilisées.
• Nepasmélangerdifférentstypesdepilesoud’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Nepasutiliserdespilesoudesaccumulateursendommagés.
• Mettreenplacelespilesoulesaccumulateursenrespectant
les polarités + et –.
• Nepasmettrelesbornesd’unepileoud’unaccumulateur
en court-circuit (en reliant directement le + et le –).
• Enleverlespilesoulesaccumulateursusagésdujouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Nelesjeterniaufeunidanslanature.
• Nepastenterderechargerdespilesnonrechargeables.
• Enleverlesaccumulateursdujouetpourlesrecharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

6
PRODUCT FEATURES
1. Off/Low/High Volume Control Switch
To turn the unit ON, slide the Off/Low/High
Volume Control Switch to the Low Volume
( ) or the High Volume ( ) position. To
turn the unit OFF, slide the Off/Low/High
Volume Control Switch to the OFF ( )
position.
2. Touch Sensitive Light-Up Screen
Use your finger to swipe the screen left,
right, up or down.
3. Mode Selector
ChoosefromExploreMode,LearnMode,
or Music Mode!
4. Activity Icons
Touch the Activity Icons to play a variety
of fun and educational activities and
hear cute phrases, music and sound
effects.
5. Automatic Shut Off
To preserve battery life, My First Learning TabletTM will
automatically power down after approximately 45 seconds
without input. The toy can be turned on again by pressing
the Home Button or changing modes.
NOTE: If the unit repeatedly powers down quickly we suggest
changing the batteries.

7
ACTIVITIES
1. Activity Icons
Touch the 20 Activity Icons to learn
about letters, numbers, shapes, animals,
colors, weather, fun facts, counting,
stories and foreign languages. The lights
will flash with the sounds.
2. Dock Icons
Touch the Phone, Clock, Violet, Camera
and Music Player icons to learn about
greetings, time concepts, pretend play
and music.
3. Home Button
Press the Home Button for role-play fun.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.

8
TROUBLESHOOTING
If for some reason the program/activity stops working, please
followthesesteps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play
again.
5. If the unit still does not work, replace with an entire set of
new batteries.
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendreavecl’arrêtdesinterférences.Sicen’estpaslecas,il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

9
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferent
from that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnician
for help.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.

10
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCETHAT
MAYCAUSEUNDESIREDOPERATION.
CAN ICES-3 (B)/NMB-3(B)