LeapFrog ABC & 123 Laptop User manual

Instruction Manual
This guide contains important information. Please keep it for future reference.
ABC & 123 Laptop
ABC & 123 Laptop
ABC & 123 LaptopABC & 123 LaptopABC & 123 Laptop
™

2
INTRODUCTION
Thank you for purchasing the ABC & 123 Laptop™! Learn and
giggle as you practice letter identification, counting and basic
computer skills with your new pal, Pixel!
Closed
On/Off
button
Settings
button
Activity
buttons
LCD screen
Movable
hands
Arrow button Star button
Music
button
Emoji
button
Letter
buttons
Number
buttons
Antenna LED

3
INCLUDED IN THIS PACKAGE
• ABC & 123 Laptop™
• Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your
child’s safety.
NOTE
Please save this Quick Start Guide as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide de démarrage rapide car
il comporte des informations importantes.

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit. Use a
screwdriver or a coin to loosen the screw and then open the
battery cover.
3. If used batteries are present, remove these batteries from
the unit by pulling up on one end of each battery.
4. Install 4 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove low batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un
adulte. Tenir les piles ou accumulateurs hors de portée des
enfants.

6
PRODUCT FEATURES
1. On/Off Button
Press the On/Off Button to turn the toy
on and off.
2. Settings Button
Press to adjust the volume and screen’s
contrast.
3. Activity Buttons
Press to choose a fun learning activity.
4. LCD Screen
The LCD Screen displays Pixel’s face and the
visuals for all the learning activities.
5. Movable Hands
Pixel’s hands move and wiggle as you play.
6. Antennae LED
Pixel’s antennae light up and flash as you
interact with them.

7
7. Number Buttons
Press the Number Buttons to activate fun
number animations and phrases.
8. Letter Buttons
Press the Letter Buttons to activate silly
letter animations and phrases.
9. Emoji Button
Press the Emoji Button to trigger emoji
animations and sounds.
10. Music Button
Press the Music Button to play learning
songs, melodies and classical music. There’s
even a simple Freeze Dance game!
11. Star Button
The Star Button is used as a confirmation
button in certain activities. When no activity
is in progress, it triggers fun phrases, mini-
activities, music and songs.

8
12. Arrow buttons
The Arrow Buttons are used to choose
answers in certain activities. When no
activity is in progress, an arrow button
triggers fun phrases, mini-activities, music
and songs.
Activities
1. Letters
Help Pixel find letters based on their names and sounds or
words based on their initial letter sounds.
2. Counting
Pixel needs your help! Kiss, tickle and high five them by pressing
the correct buttons the correct amount of times. Listen to Pixel
coo, giggle and sing as they count.
3. Typing
Type the correct letters to reveal the mystery word!
4. Snack Time
Count the snacks, then feed them to Pixel!
5. Letter Run
Press the star button to make Chip jump and collect letters to
spell words. Watch out for the code bugs and remember to
grab the gems!

9
6. Coding
Make Pixel happy by inputting three adorable actions into their
simple code.
7. Text with Chip
Receive texts from Pixel’s buddy, Chip, then text them back!
CARE & MAINTENANCE
1. Keep the toy and accessories clean by wiping it with a
slightly damp cloth.
2. Keep it out of direct sunlight and away from direct sources
of heat.
3. Remove the batteries when not using it for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back On. The unit should now be ready to
use again.
5. If the unit still does not work, install a new set of batteries.

10
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

11
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

12
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada,
or email [e-mail]. Creating and developing
LeapFrog® products is accompanied by a responsibility
that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can
occur. It is important for you to know that we stand behind
our products and encourage you to contact us with any
problems and/or suggestions you might have. A service
representative will be happy to help you.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6151
Product Name: ABC & 123 Laptop™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell St., Suite 500
Emeryville, CA 94608
Website: leapfrog.com

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2022 LeapFrog Enterprises, Inc.
All rights reserved.
IM-615100-003
Version:0