LeapFrog Tumble & Learn Color Mixer Series Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003435-008 US
Tumble & Learn
Color Mixer TM

2
LED Light
On/Off/
Volume
Control
Switch
INTRODUCTION
Thank you for purchasing the Tumble & Learn Color Mixer™.
Watch the cute truck light up and come to life by dropping
balls into the mixer and pushing its colorful shape buttons. Push
down on the mixer lever to tumble the balls inside and open the
door to dump the balls out. Kids will have a blast while building
their knowledge of numbers, shapes and colors.
Buttons
Mixer Door
Mode
Switch
Three Balls
Color
Mixer
Lever

3
INCLUDED IN THIS PACKAGE
• One Tumble & Learn Color MixerTM
• Three balls
• One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE:
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90 degrees counterclockwise.
Pull out the packaging locks and discard.

4
ACTIVATE NORMAL PLAY MODE
This product is in try-me mode in the
packaging. To activate normal play mode,
please complete the following steps:
1. Slide the On/Off/Volume Control Switch
to the OFF ( ) position.
2. Slide the On/Off/Volume Control Switch
to the Low or High Volume Control ( / )
position to activate normal play mode.
ACTIVATION DU MODE DE JEU
NORMAL
Ce produit est en mode Démonstration dans son emballage.
Pour activer le mode de jeu Normal, merci d’effectuer les étapes
ci-dessous :
1. Glisser le Curseur Marche/Arrêt/Réglage du volume sonore
sur la position Arrêt ( ).
2. Ensuite, glisser le Curseur Marche/Arrêt/Réglage du volume
sonore sur la position Volume faible ou Volume fort ( / )
pour activer le mode de jeu Normal.

5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the
battery cover.
4. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

6
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

7
PRODUCT FEATURES
1. On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch
to turn the toy on and select the volume.
2. Buttons
Press to hear cool truck sounds and fun
phrases that introduce numbers, shapes
and colors.
3. Mode Switch
Slide the Mode Switch to choose Music
Mixer, Training Time or Let’s Get to Work
mode.
4. Color Mixer Lever
Push down to activate the mixer.
5. Color Mixing Balls
Drop the balls into the mixer to hear fun
phrases and sound effects. Drop two
balls in and press the Color Mixer Lever
to “mix” the colors together.

8
ACTIVITIES
1. Music Mixer
Drop balls into the mixer to play music.
Layer construction sounds over the
music by pressing the Buttons. Press
the Color Mixer Lever to tumble balls,
create new colors and make cool beats!
Open the Mixer Door to stop the music
and sound effects.
2. Training Time
Drop balls into the mixer to hear their
colors or numbers announced. The mixer
will light up with a matching color. Press
the Color Mixer Lever to tumble the balls
and mix the colors. Open the Mixer Door
to retrieve the balls. Press the Buttons to
hear number, shape and color phrases.
3. Let’s Get to Work
Answer questions by pressing the
Buttons or by dropping balls into the
mixer.
Color
Mixer
Tumble & Learn
Color
Mixer
Tumble & Learn
Color
Mixer
Tumble & Learn
Color
Mixer
Tumble & Learn
Color
Mixer
Tumble & Learn
Color
Mixer
Tumble & Learn

9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back ON. The unit will now be ready to
play again.
5. If the unit still does not work, replace with an entire set
of new batteries.

10
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

11
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

12
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.

Read our complete warranty policy
online at
leapfrog.com/warranty.
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2017 LeapFrog Enterprises, Inc.
All rights reserved.

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
91-003435-008 US