LeapFrog Rainbow Learning Lights Mixer User manual

Learning
LearningLearningLearning
Rainbow
RainbowRainbowRainbow
Lights
LightsLightsLights Mixer
MixerMixerMixer
Instruction Manual
This manual contains important information. Please save it for future reference.

2
INTRODUCTION
Thank you for purchasing the Rainbow Learning Lights Mixer™!
Mix up sweet treats with colorful lights and fun songs while
learning through imaginative play. Who knew learning colors,
numbers, and counting could be so sweet?
Double-Sided
Cake Pan
Mixer Head
3 Pieces
of Butter
2 Eggs
5 Pieces of Chocolate
2 Double-
Sided Recipe
Cards
Paddle
Off/Low/
High
Volume
Selector
5 Mixing Buttons
Light
Projector
Mode Selector
Hat Button
Detachable
Mixing Bowl
Flour Jar
Sugar Jar
Measuring
Spoon

3
INCLUDED IN THE PACKAGE
1 mixer
5 pieces of chocolate
1 measuring spoon
1 mixing bowl
2 eggs
1 flour jar
1 double-sided
cake pan
3 pieces of butter
1 sugar jar
2 double-sided
recipe cards
• Quick Start Guide

4
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE:
Please save this Instruction Manual as it contains important
information.
CAUTION:
Hair entanglement may result if child’s hair comes in contact
with the moving parts of toy. Adult supervision isrequired.
NOTE :
After removing from packaging, wipe all the included pieces
using a slightly damp cloth. Wash the Mixing Bowl, Measuring
Spoon, Sugar Jar and Flour Jar thoroughly before and after
use. To avoid damaging the electronics, do not submerge the
mixer in water or expose it to excessive moisture.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE :
Il est conseillé de sauvegarder ce manuel d’instructions car il
comporte des informations importantes.
ATTENTION :
Pour la sécurité de votre enfant, ne pas le laisser jouer sans
surveillance. Les cheveux de l’enfant pourraient s’emmêler au
contact des parties mobiles du jouet.
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
Unlock the Packaging Locks

5
INSTRUCTIONS
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a
screwdriver to loosen the screw and then open the battery
cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 4 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

6
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.

7
PRODUCT FEATURES
1. Off/Low/High Volume Selector
To turn the unit On, slide the Off/Low/
High Volume Selector to the Low or
High position. To turn the unit Off,
slide the Off/Low/High Volume Selector
to the Off position.
2. Mode Selector
Slide the Mode Selector to choose from:
Numbers mode , Colors mode or
Creative Cakes mode .
3. Five Mixing Buttons
Lower the Mixer Head and press one
of the Five Mixing Buttons to start the
mixing and a colorful light show in the
bowl.
4. Hat Button
Press the Hat Button to start a fun
activity. Each mode has a different set
of activities to practice counting, colors
or creativity.

8
5. Mixer Head
Manually lift up the Mixer Head to add
ingredients to the Mixing Bowl or to
remove the Mixing Bowl from the mixer.
Remember to lower the Mixer Head and
Paddle into the bowl before pressing
a Mixing Button to start mixing the
ingredients.
6. Double-Sided Cake Pan
Pour pretend batter into the Double-
Sided Cake Pan then flip the cake pan
over to show a decorated cake.
7. Automatic Shut-Off
To preserve battery life, the Rainbow Learning Lights Mixer™
will automatically shut off after approximately 70 seconds
without input. The unit can be turned on again by pressing
any button or sliding the Mode Selector.
NOTE
Do not place any object into the Mixing Bowl to mix other than
the Eggs, Pieces of Chocolate and Pieces of Butter provided
with the Rainbow Learning Lights Mixer™.
NOTE :
Ne placer dans le bol aucun autre objet ou élément que les
pièces de jeu en forme d’œufs, de chocolat et de morceaux
de beurre, fournies avec le Rainbow Learning Lights Mixer™.
NOTE
If the unit powers down or if the light fades out during play,
please install a new set of batteries.

9
Activities
1. Numbers Mode
Slide the Mode Selector to Numbers mode. Press one of
the Five Mixing Buttons to hear the number and see the
Paddle mix. The number on the Mixing Button corresponds
with the mixing duration. Press the Hat Button to follow a
recipe that requests ingredients by quantity. Count along
with the mixer for extra baking fun.
2. Colors Mode
Slide the Mode Selector to Colors mode. Press one of the
Five Mixing Buttons to hear the color name and see the
Paddle mix. The color of the Mixing Button corresponds
with the color that lights up the bowl. Press the Hat Button
to follow a recipe that requests ingredients by color.
3. Creative Cakes
Slide the Mode Selector to Creative Cakes mode. Press
the Hat Button to get an idea for a Fantasy Cake and use
creativity to make a recipe for the perfect tasty treat. Press
one of the Five Mixing Buttons to watch the Paddle mix and
see a colorful light show illuminate the bowl.

10
SONG LYRICS
Intro Song
Let’s mix up a cake.
Check the recipe, make it great!
Woohoo!
Numbers Song
Let’s mix up a cake.
Check the recipe, make it great!
1, 2, 3, 4 or 5 ingredients.
Add them to the bowl, let’s take it for a spin!
Oh, yeah!
Pour the Batter in Song
When the mixing is done,
Grab the pan, tip the bowl, and pour the batter in.
(Pour the batter in!)
We’re gonna’ need some heat to cook our tasty treat.
(Mmmmm!)
(Ding!) Flip it over. I think it’s done!
Colors Song
Whipping up treats, colorful treats,
Spinning round and round the mixing bowl,
Red, orange, purple, blue and green.
Creative Cakes Song
Let’s bake your creation,
Use your imagination!

11
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back On. The unit should now be ready to use
again.
5. If the unit is still not working properly, install a brand new
set of batteries.

12
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions you
might have. A service representative will be happy to help you.

13
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

14
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6179
Product Name: Rainbow Learning Lights Mixer™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500
Emeryville, CA 94608
Website: leapfrog.com

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
Read our complete warranty policy online at
leapfrog.com/legal
LeapFrog Enterprises, Inc.
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China.
IM-617900-000
Version:0