LeapFrog Tumbling Blocks Fire Truck Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003726-000 US
608300 manual.indd 1 05/24/2019 09:44:58

2
INTRODUCTION
Thank you for purchasing the Tumbling Blocks Fire Truck™.
Head out on a learning mission with Scout! Place a letter block
in the driver's seat to hear the name of the letter, the animal
on the block and the letter sound. Raise the ladder to send
the blocks tumbling down, then lower it to autoload another
learning block for tumble-down fun.
Mission
Button
Ladder
Hose Dial
Letter
Block
Music
Button
Number
Dial
On/Off/
Volume
Control
Switch
Driver’s
Seat
Five Letter Blocks
608300 manual.indd 2 05/24/2019 09:44:59

3
INCLUDED IN THIS PACKAGE
• One Tumbling Blocks Fire Truck™
• Five letter blocks
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Note:
Please cut and discard
the cords before playing
with the unit. The cords
are not part of the
product and should
be discarded for your
child’s safety.
608300 manual.indd 3 05/24/2019 09:45:01

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery cover.
4. Remove old batteries by pulling up on one end of each
battery.
5. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
6. Replace the battery cover and tighten the screw to secure.
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks.
Unlock the packaging locks:
608300 manual.indd 4 05/24/2019 09:45:01

5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.
608300 manual.indd 5 05/24/2019 09:45:01

6
PRODUCT FEATURES
1. On/Off/Volume Control Switch
Slide the On/Off/Volume Control switch
to turn the truck on and select the
volume.
2. Music Button
Press the Music button for exciting
rescue music.
3. Number Dial
Rotate the Number Dial to set the
pretend water pressure feature and to
listen to fun number-related sounds and
music.
4. Hose Dial
Spin the Hose Dial to hear realistic water
sounds or to activate a counting activity.
608300 manual.indd 6 05/24/2019 09:45:02

7
5. Ladder
Place Letter Blocks in the truck’s storage
area on the back of the truck. Lower the
Ladder to automatically load a block
onto the Ladder. Raise the Ladder to
watch it tumble down!
Raising and lowering the Ladder also
plays fire-truck-themed sounds and
music.
6. Letter Blocks
Place the five Letter Blocks one at a
time in the Driver’s Seat to hear silly
letter and animal phrases and sounds. All
twenty-six letters of the alphabet have a
corresponding firefighter animal.
7. Mission Button
Press this button to activate role-play
rescue missions.
8. Wheel Sensor
Push the truck to hear exciting rescue
songs, phrases, sirens and sounds.
608300 manual.indd 7 05/24/2019 09:45:02

8
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep it out of direct sunlight and away from direct heat
sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play
again.
5. If the unit still does not work, replace with an entire set of
new batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
608300 manual.indd 8 05/24/2019 09:45:02

9
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
Supplier’s Declaration of Conformity
Trade Name: LeapFrog®
Model: 6083
Product name: Tumbling Blocks Fire Truck™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Website: leapfrog.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
608300 manual.indd 9 05/24/2019 09:45:02

10
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.
608300 manual.indd 10 05/24/2019 09:45:03

11
608300 manual.indd 11 05/24/2019 09:45:03

Read our complete warranty policy online
at leapfrog.com/warranty
LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2019 LeapFrog Enterprises, Inc.
All rights reserved.
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
91-003726-000 US
608300 manual.indd 12 05/24/2019 09:45:03