Ledj EasiLED 4 User manual

Order code: LEDJ323
EasiLED 4 DMX Controller
User Manual
SPOT 1 SPOT 2 SPOT 3 SPOT 4
SAVE/DELETE
CHASES
MASTER BLACKOUT
TAP/TEMPO
AUTO
SOUND
FADER/
PRESET
USER/
BANK
SCENES
0
100
80
60
40
20
0
100
80
60
40
20
0% 100%
0% 100%
0% 100%
0% 100%
0
100
80
60
40
20
SPEED
FADE/SOUND SENS
STROBE
SPEED
STROBE
DC INPUT
DC 9V-12V
300mA min
POWER
AUDIO INPUT
LINE/MIC
DMX OUTPUT
1 = Ground
2 = Data -
3 = Data +
1
2
3
123456
CHANNEL MODE:
1: RGB 2: RGBD
3: RGBW 4: RGBWD
5: DRGB 6: DRGBW
1
17
33
49
1
4
7
10
SPOT 1
SPOT 2
SPOT 3
SPOT 4
12
1
2
3 5
6
7
10 9
11
4
8
12
1
2
3 5
6
7
10 9
11
4
8
EasiLED 4
EasiLED 4
www.prolight.co.uk
I
O

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProlight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thisxtureisforprofessionaluseonly-itisnotdesigned
fororsuitableforhouseholduse.Theproductmustbe
installedbyaqualiedtechnicianinaccordancewithlocal
territoryregulations.Thesafetyoftheinstallationisthe
responsibilityoftheinstaller.Thexturepresentsrisksof
severeinjuryordeathduetorehazards,electricshock
andfalls.
• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
3
Product overview & technical specications
TheEasiLED4fromLEDJisauniversalDMXcontrollerdesignedforcontrollingmulti-colourLEDxtures.Suitable
forusewithRGBorRGBWproducts,withorwithoutdimmerchannelsthecontrollermaybeusedforLEDparcans,
panelsorevenLEDstriplights.Designedtooperatefourxturegroups,thecontrollerhasanintuitivelayoutwitha
rotarycolourselectoranddimmerfaderforeachofthefourxturegroups.
EasiLED 4 DMX Controller
• CancontroluptofourxturesfromRGB
throughtoRGBW+Dimmer
• Masterdimmerfunction
• RGBWcolourselectonrotarycontrol
• Strobefunctionwithadjustablespeed(1-20Hz)
• Powerontolastusedfunction
• Internalmicrophone
• Linelevelaudioinput
Specications EasiLED 4
Powersupply DC9V-12V,300mAmin
(byadaptorincluded)
Dimensions 60x260x140mm
Weight 1.2kg
Ordercode LEDJ323
SPOT 1 SPOT 2 SPOT 3 SPOT 4
SAVE/DELETE
CHASES
MASTER BLACKOUT
TAP/TEMPO
AUTO
SOUND
FADER/
PRESET
USER/
BANK
SCENES
0
100
80
60
40
20
0
100
80
60
40
20
0% 100%
0% 100%
0% 100%
0% 100%
0
100
80
60
40
20
SPEED
FADE/SOUND SENS
STROBE
SPEED
STROBE
DC INPUT
DC 9V-12V
300mA min
POWER
AUDIO INPUT
LINE/MIC
DMX OUTPUT
1 = Ground
2 = Data -
3 = Data +
1
2
3
123456
CHANNEL MODE:
1: RGB 2: RGBD
3: RGBW 4: RGBWD
5: DRGB 6: DRGBW
1
17
33
49
1
4
7
10
SPOT 1
SPOT 2
SPOT 3
SPOT 4
12
1
2
3 5
6
7
10 9
11
4
8
12
1
2
3 5
6
7
10 9
11
4
8
EasiLED 4
EasiLED 4
www.prolight.co.uk
I
O
01-Rotarycolourselectors
02-Fixturedimmercontrols
03-Chaseselector(12settings)
04-Preset/Userbankselector
05-Sceneselector(12settings)
06-Save/Deletebutton
07-Masterdimmer
08-Speedcontrol
09-Fadetimecontrol
10-Strobespeedcontrol
11-Blackoutbutton
12-TAP/Tempobutton
13-Automodebutton
14-Soundmodebutton
15-Strobebutton
16-3-PinDMXoutput
17-DMXstartaddress
18-DMXchannelselection
19-Internalmicrophone/
externalaudioselect
20-AudioInput
21-DCpowerinput(centre+ve)
22-Poweron/offswitch
Inthebox:1 x controller,
1 x power adaptor
& 1 x user manual
01
12
13
08
09
16 17 18 19 20 21 22
02
04
05
06 10 15 14
03 07 11

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
4
Initial setup:
ConnectthesuppliedmainspoweradaptortotheDCpowerinputonthecontrollerandthentoa
suitablemainsvoltagesupply(100-240VAC~50/60Hz).ConnecttheLEDxturesusingstandard3-pin
DMXdatacables.FollowthesetupprocedureforthecontrollerrstbeforepoweringontheLEDxtures.
Thecontrollercanbeusedtocontrol3or4colourLEDproductseachwithorwithoutadimmerchannel.
DMX channel assignment:
ThecontrollerhaspresetDMXstartaddressesforeachofthefourxtures.Pleasesetyourxturetothe
followingDMXaddresses.Pleasenote:IftwoormorexturesaresettothesameDMXaddresstheywill
receivethesameDMXcommands.Thecontrollercanbesetuptoaddressfourindividual3channelRGB
xturesaddressedsequentially(001,004,007and010)orifthexturesfeatureRGBWorRGBwitha
dimmerchanneltheycanbeaddressedwithsufcientspacingbetweenthexturestoaccountforthe
extrachannels(001,017,033and049).
Operating instructions
Fixture Number Group DMX Start Address - LED Par Cans/Panels DMX Start Address - Multi LED Bars (3CH RGB only)
1001 001
2017 004
3033 007
4 049 010
Example of 4 RGBW par cans:
DMXaddress:001 DMXaddress:017 DMXaddress:033 DMXaddress:049
SPOT 1 SPOT 2 SPOT 3 SPOT 4
SAVE/DELETE
CHASES
MASTER BLACKOUT
TAP/TEMPO
AUTO
SOUND
FADER/
PRESET
USER/
BANK
SCENES
0
100
80
60
40
20
0
100
80
60
40
20
0% 100%
0% 100%
0% 100%
0% 100%
0
100
80
60
40
20
SPEED
FADE/SOUND SENS
STROBE
SPEED
STROBE
DC INPUT
DC 9V-12V
300mA min
POWER
AUDIO INPUT
LINE/MIC
DMX OUTPUT
1 = Ground
2 = Data-
3 = Data+
1
2
3
123456
CHANNEL MODE:
1: RGB 2: RGBD
3: RGBW 4: RGBWD
5: DRGB 6: DRGBW
1
17
33
49
1
4
7
10
SPOT 1
SPOT 2
SPOT 3
SPOT 4
12
1
2
3 5
6
7
10 9
11
4
8
12
1
2
3 5
6
7
10 9
11
4
8
EasiLED 4
EasiLED 4
www.prolight.co.uk
I
O
Example of 4 RGB pars on a bar:
DMXaddress:001 DMXaddress:004 DMXaddress:007 DMXaddress:010
SPOT 1 SPOT 2 SPOT 3 SPOT 4
SAVE/DELETE
CHASES
MASTER BLACKOUT
TAP/TEMPO
AUTO
SOUND
FADER/
PRESET
USER/
BANK
SCENES
0
100
80
60
40
20
0
100
80
60
40
20
0% 100%
0% 100%
0% 100%
0% 100%
0
100
80
60
40
20
SPEED
FADE/SOUND SENS
STROBE
SPEED
STROBE
DC INPUT
DC 9V-12V
300mA min
POWER
AUDIO INPUT
LINE/MIC
DMX OUTPUT
1 = Ground
2 = Data-
3 = Data+
1
2
3
123456
CHANNEL MODE:
1: RGB 2: RGBD
3: RGBW 4: RGBWD
5: DRGB 6: DRGBW
1
17
33
49
1
4
7
10
SPOT 1
SPOT 2
SPOT 3
SPOT 4
12
1
2
3 5
6
7
10 9
11
4
8
12
1
2
3 5
6
7
10 9
11
4
8
EasiLED 4
EasiLED 4
www.prolight.co.uk
I
O

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
5
Operation:
TheEasiLED4hasthreemainmodesofoperation:Manual,AutoorSoundcontrol.UsetheAuto,
MusicorFader/Preset&User/Bankbuttonstoswitchbetweeneachusermode.TheLEDindicatorswill
illuminatenexttoeachofthebuttonstoconrmtheusermodeselected.TheManualmodeisindicated
bythefader/presetgreenLED.
Afterpoweron,thecontrollerwillrestartinthelastusedmodeassumingthelastusedmodewasactive
for10secondsormore.
Pleasenote:Inallmodes,theblackoutbuttonmaybepressedtoturnoffthelightoutput.TheredLED
nexttoblackoutbuttonwillashtoindicateblackoutisactive.Blackoutwilloperateregardlessofthe
xture/groupselection.
Manual mode:
ManualModecanbeusedforselectionofcolourseitherforadhocscenesorforcreatingscenesbefore
recordingintosavedscenesorchases.SwitchthecontrollertoManualMode(indicatedbyGreenLED
bytheFader/Presetbutton)andfollowthestepslistedbelow:
-Setthecoloursofthextures/groupsusingtherotaryselectors
-Adjusttheintensity(brightness)ofthextures/groupsusingFaders1-4ensuringthe
masterdimmerisalsoactive.
-Turnthefadetimecontrolanti-clockwiseto“0”forinstantcolourchangesorrotateclockwisetoin
creasethefadetimebetweencolours.
Saving scenes:
AftersettingthesceneaspertheManualModeinstructionsyoucansavethesceneandatthesame
timesavethesceneasasinglestepintheselectedchase(1to12).SelecttheChaseandScenethen
pressthe“Save/Delete”button,thegreenLEDwillashquicklythreetimestoconrm.
Deleting scenes:
AftersettingthesceneaspertheManualMode.SelecttheChaseandScenethenpressandholdthe
“Save/Delete”button,alloftheLEDsonthecontrollerwillashtoconrm.
Scene playback:
PresstheFader/PresetbuttontoilluminatetheorangeLEDconrmingthecontrollerisnowinUser/
Bankmode.Selectthechaseandthenscenerequired.Sceneplaybackmaybemanuallyadvancedby
selectingscenesindividuallyusingtherotarySceneselector,ortheymaybeadvancedbyeitherSound
orAutomodes.
Operating instructions

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
6
Operating instructions
01) Rotary colour selectors:
Twelve,presetcoloursselectableusingsimplerotarycontrolswhenthecontrollerisusedinManual
Mode.
02) Fixture dimmer controls:
Fourdimmerfaders,eachforcontrollingtheintensityforaxture/group.
03) Chase selector (12 settings):
Thecontrollercanstoreupto12chases,eachchasemaybebuiltusingupto12scenesperchase.
Usetherotaryselectortochoosetherequiredchase.
04) Preset/User bank selector:
UsethisbuttontoswitchbetweenManual/FadermodeandUser/Bankmodes.
05) Scene selector (12 settings):
Thecontrollercanstoreupto12chases,eachchasemaybebuiltusingupto12scenesperchase.
Usetherotaryselectortochoosetherequiredsceneafterselectingthechase.
06) Save/Delete button:
WhenthecontrollerisinManualmode,aquickpresswillsaveaselectedscene,conrmedbythree
greenashesoftheLED.Pressandholdtodeleteaselectedscene,allLEDsonthecontrollerwillash
toconrmscenedeletion.
07) Master dimmer:
Activeinallmodes,themasterdimmercontrolcanbeusedtoadjusttheintensityofallxtures
connectedtothecontroller.
08) Speed control:
ThespeedcontrolcanbeusedtoadjustthechasespeedwhenthecontrollerisinAutomode.
Turnclockwisetoincreasethechasespeed.
09) Fade time control:
Activeinallmodes,theFadeTimecontrolcanbeusedtoadjustfadetimebetweenallfunctionsonthe
controllerincludingmanualcolourselections.Forinstantchangesthefadetimemustbeturnedfullyto
theleft(anti-clockwise).
10) Strobe speed control:
TheStrobeSpeedControlcanbepreselectedaheadofStrobeModeactivation.Turnclockwiseto
increasethestrobefrequency.
11) Blackout button:
PresstheBlackoutbuttontoactivateblackoutforallxturescontrolledbytheEasiLED4controller.
Whileactivated,BlackoutmodewillbeconrmedbyaredLEDashingnexttothebutton.
12) TAP/Tempo button:
TheTAP/Tempocontrolallowstheusertoselecttheplaybackspeedforchasesintime.WhileinAuto
mode,presstheTAP/Tempobuttonaminimumofthreetimestosetthedesiredplaybackspeed.

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
7
Operating instructions
13) Auto mode button:
SelectUser/BankmodethenpresstheAutobuttontoactivateAutomodeforscene/chaseplayback.
PlaybackspeedinAutomaybecontrolledbyeithertheTap/TemportheSpeedcontrol.
14) Sound mode button:
SelectUser/BankmodethenpresstheSoundbuttontoactivateSoundmodeforscene/chase
playback.Toadjusttheinternalmicrophonesensitivity,pressandholdtheSoundbuttonanduse
thefadecontrol.
15) Strobe button:
TheStrobefunctioncanbemadeactiveinallmodesacrossthecontroller.PresstheStrobecontrol
buttontoactivateStrobemode,theredLEDwillilluminatetoconrmStrobemodeisactive.Thecontrol
forstrobeislatchingandwillremainactiveuntilthebuttonispressedasecondtime.
16) 3-Pin DMX output:
3-PinXLRsocketoutput.Pin1=Ground,Pin2=data–ve,Pin3=data+ve
17) DMX start address:
ThecontrollerhaspresetDMXstartaddressesforeachofthefourxtures.Pleasesetyourxturetothe
followingDMXaddresses.Pleasenote:IftwoormorexturesaresettothesameDMXaddresstheywill
receivethesameDMXcommands.Thecontrollercanbesetuptoaddressfourindividual3channelRGB
xturesaddressedsequentially(001,004,007and010)orifthexturesfeatureRGBWorRGBwitha
Dimmerchanneltheycanbeaddressedwithsufcientspacingbetweenthexturestoaccountforthe
extrachannels(001,017,033and049).
18) DMX channel selection:
ThecontrollercanbeusedtocontroluptofourxturesfromRGBthroughtoRGBW+Dimmer.Slidethe
switchtothepositionsuitthexturesbeingused.Pleasenote:Tooperatecorrectly,allxturesshould
sharethesameDMXchannelallocation.
19) Internal microphone/external audio select:
Thecontrollercanbetriggeredeitherviatheinternalmicrophoneorfromanexternallinelevel
audiosource.
20) Audio input:
Unbalanced6.35mm(1/4”)jacksocketforlinelevelaudioinput.
21) DC power input (centre +ve):
Centrepositivetypeconnection.9-12VDC,300mAminimumregulatedtype.
22) Power on/off switch:
Usethisswitchtopowerthecontrolleron/off.

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
8
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-511.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Note: DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
9
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.Itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
10
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposed
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
11

www.prolight.co.uk EasiLED 4 DMX Controller User Manual
12