Lefroy Brooks Mackintosh MK 4651 User manual

MK 4651
MACKINTOSH SPARE PAPER HOLDER
INSTALLATION GUIDE

DIMENSIONS
TOOLS REQUIRED
Powered drill with Ø6mm drill bit Flat blade screwdriver Spirit level
125mm
230mm
100mm diamter
38mm
centres

INSTALLATION
1 Mark the hole positions on the mounting
surface. Use a spirit level to ensure the holes
are level.
2 Drill holes using a Ø6mm drill bit.
3 Insert the wall plugs into the holes then secure
the spare paper holder using the screws
supplied.

CUSTOMER SUPPORT
[phone]
LEFROYBROOKS.CO.UK
Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part
of the company’s product development process. The use of trademarks, product design and artwork is subject to
licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected
by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs
and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).
© LBIP Ltd 2016
20.065.204A / JANUARY 2016