Lefroy Brooks TT 4969 User manual

TT 4969
TEN TEN WALL MOUNTED BRUSH AND POT
INSTALLATION GUIDE

2
DIMENSIONS
TOOLS REQUIRED
Powered drill with Ø6mm drill bit Flat blade screwdriver Spirit level
109mm
113.5mm
414mm
277mm
57mm
Front view or bracket with hole centres
32mm
31.5mm 31.5mm

3
INSTALLATION
1 Remove the brush and pot from the holder.
2 Use a spirit level to ensure the holder is level
then mark the hole positions on the mounting
surface.
3 Drill holes using a Ø6mm drill bit.
4 Insert the wall plugs into the holes then
secure the holder using the screws supplied.
Alternative wall plugs should be used subject
to mounting surface construction (not
supplied).
5 Place the pot and brush into the holder.
(6 o)
(6 o)

CUSTOMER SUPPORT
[phone]
LEFROYBROOKS.CO.UK
Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part
of the company’s product development process. The use of trademarks, product design and artwork is subject to
licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected
by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs
and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).
© LBIP Ltd 2016
20.065.248A / OCTOBER 2016