LEGRAND Arteor User manual

Cat. Nos: 5 742 02/12/21/30
Technical data sheet: F02619EN/01 Updated: 03/09/2020 Created: 17/04/2018
1/2
ArteorTM
Connected switch without neutral
with dimmer option
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: [phone] - Fax: [phone]
www.legrand.com
5. OPERATION3. DIMENSIONS (mm)
4. CONNECTION
Terminal type: with screws
Terminal capacity: 2 x 1.5 mm2or 2x2.5 mm2
Stripping length: 8 mm
Flat screwdriver: 3 mm
1. USE
Connected switch without neutral with dimmer option, configured by default as ON/OFF.
Can be combined with one or more wireless lighting controls (dimmer mode can be activated from the Home + Control app).
For local or remote control of your lighting.
Supplied with an active power compensator (Cat. No. 0 401 49), mandatory to ensure optimum operation with commercially-available lamps.
One compensator per lighting circuit is sufficient.
Easy to install in place of a standard switch in a box 35 mm deep (minimum).
Claws and/or screws fixing.
2. RANGE
Description White Champagne Magnesium Soft Alu
Product for use in conjunction with the starter pack (5 742 09/18/27/36).
With LED indicator (conguration) and RESET button (hidden) used to return
to factory settings.
Supplied with rocker plate.
5 742 02 5 742 30 5 742 21 5 742 12
B
A
CD
A B C D
45 45 44.5 10
LED indicator:
- useful during installation
- blue LED illumination function can be activated from
the Home + Control app.
ON when pressed at the bottom and dimming when held
down until released.
OFF when pressed at the top and dimming when held
down until released.
ON
OFF
RESET button used to return to factory settings
0 401 49
5 742 02

2/2
Cat. Nos: 5 742 02/12/21/30
ArteorTM
Connected switch without neutral
with dimmer option
Technical data sheet: F02619EN/01 Updated: 03/09/2020 Created: 17/04/2018
6. TECHNICAL CHARACTERISTICS
 6.1 Mechanical characteristics
Protection against impacts: IK 04
Protection against solid bodies/liquids: IP 41 assembled product
6.2 Material characteristics
Rocker plate: ABS
Mechanism casing: PC
Halogen-free
UV-resistant
Self-extinguishing:
850°C/30 s for insulating parts holding live parts in place.
650°C/30 s for other insulating components.
6.3 Electrical characteristics
Voltage: 110-230 V~
Power: 300 W
Frequency: 50/60 Hz
Standby consumption: < 0.2 mW
(*)
Or 5 lamps max. For comfortable lighting, we recommend using bulbs of the
same type and make.
(**)The ferromagnetic transformers must be charged to more than 60% of their
power. When calculating the permissible power, the ferromagnetic transformer
efficiency must be taken into account. A load must be connected before
programming and using the product.
Zigbee technology 2.4 GHz to 2.4835 GHz
Power level: < 100 mW
Range: 200 m of unobstructed space
10 m between products indoors
 6.4 Climate characteristics
Usage temperature: + 5°C to + 45°C
Storage temperature: 0°C to + 45°C
7. CARE
Clean the surface with a cloth.
Do not use acetone, tar-removing cleaning agents or trichloroethylene.
Resistant to the following products:
Hexane (EN 60669-1), methylated spirit, soapy water, diluted ammonia,
pure bleach diluted to 10%, window-cleaning products, pre-impregnated
wipes.
8. STANDARDS AND APPROVALS
Compliant with installation and manufacturing standards.
See e-catalogue.
The undersigned, LEGRAND, declares that the radio-electric equipment
type (5 742 02/12/21/30) complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the
following website: www.legrandoc.com
R L
LED **
240 V~
Max. 300 W (*)50 W 50 W 300 VA 300 VA
Min. 7 W 5 W 9 W 10 VA 35 VA
100 V~
Max. 150 W (*)25 W 25 W 150 VA 150 VA
Min. 7 W 5 W 9 W 10 VA 35 VA
Caution: Always test before using special cleaning products.