Leigh Country CHAR-LOG TX 93465 User manual

1
35
2
UPPER SUPPORT
X 4PCS X 1PC
X 1PC X 32PCS
X 4PCS
X 16PCSX 16PCS
X 8PCS
STEP 1: STEP 2:
Mallet
Socket & Wrench
Phillips
Screwdriver
Tools Required for Assembly
13mm
STEP 5:STEP 4:
LEG
1S x 2PCS
1P x 2PCS
4 6
STEP 3:
1. Do not tighten bolts until fully assembled.
2. Recessed holes to face outward.
3. Insert bolts with washer and secure with washer and nut.
4. Pre-checked side must always face downward or inward.
IMPORTANT: READ CAREFULLY BEFORE BEGINNING
Recessed Hole
Pre-Checked
PARTS AND HARDWARE LIST
Tools Included
LOWER SUPPORT
X 4PCS
SHAFT
CROSS BRACE
7A
Congratulations
on your assembly!
N08-11
B
D E
S04-5
C
STAKE
PLATFORM
WINDMILL HEAD NUT & BOLT
B
5
B
C
6
2
Fit the Shaft (5) between the angles at the
top of the legs: Secure with the screws (B)
using a standard or electric drill.
Assembling
Place the Windmill Head (7) on the Shaft (5)
Slide the Platform (6) through
the Shaft (5), and secure with
the Screws (B). Fix the Cross
Braces (2) on to the legs
with the screws (C)
Tighten all Bolts and Screws
8
S04-3
ITEM#: TX 93465, TX 93457
X 4PCS
CLAMP
Please tighten the Clamp (E) on each
windmill leg (about 8cm to the end ),
in order to avoid the wooden legs
cracked when insert the Stakes (D)
into the ground.
D
E
CHAR-LOG®WINDMILL
Do not fully tighten the bolts.
Connect the Upper Support (3) and the
Lower Support (4) between the Legs by
using the Bolts (A x 16).
2P
3
A
A
4
1S
1S
1P
1P
A
Separate assembly instructions
included in box with windmill head.
Assemble the Windmill Head (7),
make sure the Stop Nut is screwed
on well.
Overhead View
1P
1P
1S
1S
Length: 13.5”

www.LeighCountry.com
© 2020 UGS Co., Inc. All Rights Reserved The Char-log finishis copyright protected
DISTRIBUTED BY:
UNITED GENERAL SUPPLY CO., INC.
HOUSTON, TX 77036
Limited Warranty and Care Instructions
ONE (1) YEAR LIMITED WARRANTY (NON-TRANSFERABLE)
This product is covered underUnited General Supply’s (UGS) one (1) year limited warranty. To the original
purchaser of this piece of furniture, cooler, or accessory; UGS warrants that it will be free from defects
in material and workmanship for up to one year from the date of purchase under normal use and proper
care.
Replacement ofdefective or missingparts will be sentatnocharge to the customer for a period of 30days
from the date of purchase.UGS will no longer be responsible for missingparts or hardware 30 days after
date ofpurchase. Freight, packaging, labor, or material charges to and from our customer service center is
not covered under the warranty and is therefore the customer’s responsibility.
The limited warranty does not cover this piece offurniture, cooleroraccessoryfor commercial purposes,
abusive use, damage bymodification, freeze damage, damage from bad weather, rust, fading and issues
caused byimpropercare.
For minor defects or missing parts/hardware, please contactcustomer service immediately upon
purchase.Please do not return product to the store unless the product is irreparable.A customer service
agentmay help determine whether the damage is reparable and will provide furtherinstructions.
For returns and refunds, please refer to your local store return policywith proof of purchase.
Proof ofpurchase (dated register receipt) will be required for warranty claims.
Please register yourproduct warranty at www.leighcountry.com/register.
The use of power tools during assemblymay void this warranty.
PROPER CARE INSTRUCTIONS
Ifleft untreated, wood will naturally weather.Duringlong periods of non-use, store furniture or
cooler in covered and dry place. For the least maintenance, place yourfurniture, cooler, or accessory
under a covered area.
To preserve and maintain the original finish of Char-log/Aspen log furniture, we recommend that a
light lacquer coatingbe applied every 4 to 6 months depending on the seasons.
We recommended anexterior polyurethane product thatfeatures aclearsatinorsemi-gloss finish and
a fast drying process.
Customer Service may be reached Monday through Friday from 9:00a.m. to 5:00p.m. CST.