LEMKEN TITAN 18 User manual

OPERATING INSTRUCTIONS
SEMI-MOUNTED REVERSIBLE
PLOUGH
TITAN 18
en-GB | Item no. 17514590 | BA 01/01.2021

Ensure that these instructions are always available when using the machine
and can be accessed by all users..
●
Keep these instructions for the entire service life of the machine.
●
Pass these instructions to all users / owners.
Original instructions
©2021 | This documentation is copyright protected. The copyright remains with LEMKEN GmbH & Co.
KG, Weseler Strasse 5, D-46519 Alpen.
The texts, diagrams and drawings must not be duplicated, distributed or disclosed in any other way,
either in whole or in part, without express approval.

Table of contents
1 About these instructions....................................................................................................................................... 1
1.1 Introduction......................................................................................................................................................... 1
1.2 Target groups...................................................................................................................................................... 2
1.3 Applied symbols................................................................................................................................................ 2
1.3.1 Design of warning signs.............................................................................................................................. 2
1.3.2 Signal words and hazard statements...................................................................................................... 3
1.3.3 Warning of property damage.................................................................................................................... 3
1.3.4 Other notices and information.................................................................................................................. 3
1.3.5 Symbols and text markings........................................................................................................................ 4
1.3.6 Direction specications................................................................................................................................ 4
1.3.7 Language setting........................................................................................................................................... 5
1.3.8 Operation with several ISOBUS operation terminals........................................................................ 5
1.4 Further applicable documents..................................................................................................................... 5
2 Safety.............................................................................................................................................................................. 6
2.1 Intended use........................................................................................................................................................ 6
2.2 Personnel qualication requirements........................................................................................................ 8
2.3 Hazardous areas................................................................................................................................................. 8
2.4 Workplaces and passengers........................................................................................................................ 10
2.5 Technically perfect condition..................................................................................................................... 11
2.6 Safe handling.................................................................................................................................................... 13
2.6.1 Personal protective equipment.............................................................................................................. 13
2.6.2 Driving the tractor-machine combination......................................................................................... 13
2.7 Safety devices and labels............................................................................................................................. 14
3 Design and description........................................................................................................................................ 15
3.1 Machine overview........................................................................................................................................... 15
3.2 Machine safety................................................................................................................................................. 16
3.2.1 Position of the label.................................................................................................................................... 16
3.2.2 Meaning of the labels................................................................................................................................. 16
3.2.3 Safety devices............................................................................................................................................... 18
3.3 Type plate.......................................................................................................................................................... 21
3.4 Headstock.......................................................................................................................................................... 22
3.5 Frame................................................................................................................................................................... 22
3.6 Working width adjustment.......................................................................................................................... 22
3.7 Turnover device............................................................................................................................................... 23
3.8 Wheels................................................................................................................................................................. 23
3.9 Overload safety devices................................................................................................................................ 23
3.10 On-land version............................................................................................................................................. 24
3.11 Plough body................................................................................................................................................... 24
Table of contents
en-GB | Item no. 17514590 | BA 01/01.2021 I

3.12 Additional tools............................................................................................................................................. 25
3.13 Disc coulter..................................................................................................................................................... 26
3.14 Subsoiler.......................................................................................................................................................... 27
4 Attaching.................................................................................................................................................................... 28
4.1 Checking suitability of the tractor............................................................................................................. 28
4.2 Preparing the tractor...................................................................................................................................... 29
4.3 Preparing the machine.................................................................................................................................. 30
4.4 Attaching the machine................................................................................................................................. 30
5 Road travel................................................................................................................................................................. 33
5.1 Information on road travel........................................................................................................................... 33
5.2 Preparing for road travel.............................................................................................................................. 33
5.2.1 Adjusting the suspension......................................................................................................................... 34
5.2.2 Preparing the lighting equipment for road travel........................................................................... 34
5.2.3 Subsoilers....................................................................................................................................................... 35
6 Operation................................................................................................................................................................... 36
6.1 Basic operation................................................................................................................................................. 36
6.1.1 Operating the stands.................................................................................................................................. 36
6.1.2 Turning process when turning............................................................................................................... 36
6.1.3 Moving the plough from operating position to transport position.......................................... 38
6.1.4 Moving the plough from transport position to operating position.......................................... 38
6.2 Changing the setup state............................................................................................................................. 39
6.2.1 All setup options at a glance................................................................................................................... 39
6.2.2 Mounting the sword coulter.................................................................................................................... 39
6.2.3 Mounting the wide furrow cutter.......................................................................................................... 40
6.3 Adjusting the machine.................................................................................................................................. 40
6.3.1 All adjustments at a glance...................................................................................................................... 40
6.3.2 Adjusting the operating pressure for the traction increase device........................................... 41
6.3.3 Adjusting the working depth.................................................................................................................. 42
6.3.4 Adjusting the inclination.......................................................................................................................... 44
6.3.5 Adjusting front furrow width.................................................................................................................. 45
6.3.6 Adjusting the draw point height........................................................................................................... 46
6.3.7 Adjusting the pitch angle of the plough bodies.............................................................................. 46
6.3.8 Adjusting the working width of the plough bodies....................................................................... 49
6.3.9 Landside.......................................................................................................................................................... 51
6.3.10 Adjusting the working depth of the subsoilers.............................................................................. 52
6.3.11 Adjusting the trashboard ...................................................................................................................... 52
6.3.12 Adjusting the skimmer ........................................................................................................................... 54
6.3.13 Adjusting the disc coulter...................................................................................................................... 56
6.3.14 Adjusting the hydraulic overload safety device............................................................................. 60
Table of contents
en-GB | Item no. 17514590 | BA 01/01.2021II

6.4 Working with the machine.......................................................................................................................... 62
6.4.1 Standard procedure.................................................................................................................................... 62
6.4.2 Driving on the headland........................................................................................................................... 63
7 Cleaning and care................................................................................................................................................... 64
7.1 After working in the eld.............................................................................................................................. 64
7.2 Cleaning with high-pressure cleaner....................................................................................................... 64
8 Detaching................................................................................................................................................................... 65
8.1 Detaching the machine................................................................................................................................ 65
9 Maintenance and repair work.......................................................................................................................... 67
9.1 Maintaining the machine properly........................................................................................................... 67
9.1.1 Preparations.................................................................................................................................................. 67
9.1.2 During the maintenance and repair..................................................................................................... 67
9.2 Maintenance..................................................................................................................................................... 68
9.2.1 Maintenance schedule............................................................................................................................... 68
9.2.2 Tractor connection...................................................................................................................................... 69
9.2.3 Frame............................................................................................................................................................... 69
9.2.4 Hydraulics....................................................................................................................................................... 70
9.2.5 Electrics............................................................................................................................................................ 71
9.2.6 Soil working tools........................................................................................................................................ 71
9.3 Lubricating......................................................................................................................................................... 72
9.3.1 Lubrication schedule.................................................................................................................................. 72
9.3.2 Lubricate components via grease nipples.......................................................................................... 72
9.3.3 Grease components.................................................................................................................................... 73
10 Troubleshooting and error correction......................................................................................................... 74
10.1 Find and eliminate errors correctly........................................................................................................ 74
10.1.1 Prior to troubleshooting at the implement..................................................................................... 74
10.1.2 When troubleshooting and eliminating errors.............................................................................. 74
10.2 Error - Cause - Remedies at a glance...................................................................................................... 75
10.3 Replacing the shear bolt............................................................................................................................ 76
11 Shutdown and disposal....................................................................................................................................... 78
11.1 Shutdown........................................................................................................................................................ 78
11.2 Disposal............................................................................................................................................................ 78
12 Technical data.......................................................................................................................................................... 79
12.1 Dimensions..................................................................................................................................................... 79
12.2 Implement weights...................................................................................................................................... 79
12.3 Permissible mass and loads...................................................................................................................... 80
12.4 Required drawbar load............................................................................................................................... 80
12.5 Performance data......................................................................................................................................... 80
Table of contents
en-GB | Item no. 17514590 | BA 01/01.2021 III

12.6 Connection data............................................................................................................................................ 81
12.6.1 Electrical connections.............................................................................................................................. 81
12.6.2 Hydraulic connections............................................................................................................................. 82
12.7 Noise, airborne sound................................................................................................................................. 82
12.8 Operating materials..................................................................................................................................... 82
12.9 Tyres and wheels........................................................................................................................................... 83
12.10 Permitted shear bolts............................................................................................................................... 83
12.11 Connecting equipment at the implement........................................................................................ 83
Index............................................................................................................................................................................. 84
Appendix.................................................................................................................................................................... 88
A Type plate variants............................................................................................................................................ 89
B Tightening torques............................................................................................................................................ 91
C Bolted connections............................................................................................................................................ 93
D Cross shaft overview....................................................................................................................................... 100
Table of contents
en-GB | Item no. 17514590 | BA 01/01.2021IV

1 About these instructions
1.1 Introduction
These operating instructions are important and belong to the
machine's scope of delivery.
These operating instructions must be available to the user at the place
of use.
nAlways read chapter "Safety" before using the machine for the rst
time.
nRead chapter "Operation - Basic operation" before using the
machine for the rst time.
nBefore starting work, also read the relevant steps in the operating
instructions.
For an unambiguous assignment of this document to the machine,
transfer the following data from the type plate of the machine
Ä Chapter 3.3 ‘Type plate’ on page 21:
Designation on the type
plate
Enter the machine data here:
Series
Type designation
Model year
Serial number
Year of manufacture
The machines can be equipped dierently at the factory.
Standard components, special equipment or optional accessories are
not marked separately.
The contents of these operating instructions, e.g. illustrations, may
therefore dier from the equipment of the machine.
Depending on the equipment, additional documents may be required
for operation.
Observe the operating instructions
Validity range
Equipment variants
About these instructions
en-GB | Item no. 17514590 | BA 01/01.2021 1

These operating instructions do not describe initial commissioning.
INFORMATION
Prior to operation, initial commissioning and instruction
in operation, setting and maintenance must have been
carried out by the dealer.
1.2 Target groups
The target groups of these operating instructions are operators, users
and service personnel of the machine.
The target groups must meet the requirements for the qualication of
the personnel Ä, see page 8.
1.3 Applied symbols
1.3.1 Design of warning signs
The warning signs in these instructions have the following design:
WARNING
Type and source of hazard
Possible consequences of non-adherence
– Measures for hazard avoidance
The signal word indicates the risk level.
Initial commissioning
About these instructions
en-GB | Item no. 17514590 | BA 01/01.20212

1.3.2 Signal words and hazard statements
The following signal words and hazard statements are used to label
warning signs and to warn of residual risks:
DANGER
Indicates an immediate hazardous situation
If the hazardous situation is not avoided, it will result in
death or serious injury.
WARNING
Indicates a hazardous situation
If the hazardous situation is not avoided, it may result in
death or serious injury.
CAUTION
Indicates a hazardous situation
If the hazardous situation is not avoided, it may result in
moderate or minor injury.
1.3.3 Warning of property damage
ATTENTION
Indicates a situation that may result in property
damage
If the situation is not avoided, it may result in damage to
the machine or to objects in the vicinity of the machine.
1.3.4 Other notices and information
INFORMATION
Indicates tips and useful information for the user
The tips and information facilitate work. This ensures
proper use of the machine.
ENVIRONMENTAL PROTECTION
Indicates notices and special measures regarding
environmental protection
The tips and information on environmental protection
facilitate environmentally friendly use of the machine.
About these instructions
en-GB | Item no. 17514590 | BA 01/01.2021 3

1.3.5 Symbols and text markings
Symbol, text marking Meaning
In front of and in texts
●Marking for routine maintenance
tasks
Activities that demand the help
of service sta.
nListing
[1], , Position numbers
Example: ‘Settings’ Software element
Example: [OK] Softkey, key, switch and button
[kg] Unit
ÄCross reference
In work instructions
√ Preconditions
►nWorking steps in single-step
work instructions
nMeasures for hazard avoid‐
ance in safety information
1.
2.
Working steps in multi-step work
instructions
ðResult
In illustrations
Light grey coloured components Non-relevant components, visible
to facilitate orientation
Yellow coloured components Action-relevant components
1.3.6 Direction specications
The direction specications used in the text (left, right, front and rear)
refer to the direction of travel of the tractor when moving forwards, i.e.
in normal operation.
About these instructions
en-GB | Item no. 17514590 | BA 01/01.20214

1.3.7 Language setting
The language of the control is coupled with the language setting of the
ISOBUS operation terminal. If a set language is not available for the
control, English is displayed automatically.
1.3.8 Operation with several ISOBUS operation terminals
If several ISOBUS operation terminals are connected to the machine via
an interface, machine operation can be switched to any ISOBUS opera‐
tion terminal.
1.4 Further applicable documents
Further documents to be observed:
nOperating instructions of the tractor
nFor partially assembled or disassembled delivery:
Mounting instructions
nSpare-parts list
nOperating instructions for the coupling carriage
INFORMATION
In other documents and in sections of these operating
instructions, the machine is also referred to as an imple‐
ment.
About these instructions
en-GB | Item no. 17514590 | BA 01/01.2021 5

2 Safety
2.1 Intended use
The machine is used for soil cultivation on agricultural land.
It may only be used in accordance with the recognised rules of good
agricultural practice.
The permitted working depth is limited to the cultivatable soil horizons.
Not intended for use in the following cases:
nOn very or deep-frozen soils
nIn soil horizons with unweathered bedrock
nIn soil horizons with loose rock or solid hard rock
►Only suciently qualied personnel may use the machine.
ÄPersonnel qualication requirements, see page 8.
►Only use the machine with a suitable tractor.
►When using the machine, observe the permitted loads and weights
for the tractor, machine and tractor-machine combination.
Limitations
Personnel
Tractor
Safety
en-GB | Item no. 17514590 | BA 01/01.20216

The operating instructions are part of the machine. The machine is
intended exclusively for use in accordance with these operating
instructions. Applications of the machine not described in these oper‐
ating instructions may result in personal injury or death or property
damage. If applications other than those described in the operating
instructions are planned, obtain the prior written consent of the manu‐
facturer. This also applies to unauthorised modications and alterations
to the machine.
►Observe the operating instructions and follow the working steps
given therein.
►Clarify questions of comprehension concerning the contents of
these operating instructions before starting work. If necessary, con‐
tact the manufacturer’s sales partner.
INFORMATION
In other documents and in sections of these operating
instructions, the machine is also referred to as an imple‐
ment.
►Operate the machine only in a technically perfect condition.
►Observe the maintenance instructions. Perform all the necessary
tests.
►Use original spare parts or parts approved by the manufacturer.
►Only use the auxiliary and operating materials listed.
►Dispose of auxiliary materials and operating materials in an envi‐
ronmentally responsible manner.
Liability and warranty are excluded if personal injury and damage to
property can be traced back to improper use or non-observance of the
operating instructions.
Operating instructions
Technically perfect condition
Liability and warranty
Safety
en-GB | Item no. 17514590 | BA 01/01.2021 7

2.2 Personnel qualication requirements
The operator is obliged to inform all the users about correct application
of the machine and the respective hazards. This can be done on the
basis of these operating instructions. The operator is responsible for
ensuring that the operating instructions are always available at the
machine and that the users observe the operating instructions. The
operator must also provide any necessary personal protective equip‐
ment.
Users are persons who drive, adjust, operate or maintain the machine.
Users must be able to use the machine safely. This means:
nUsers understand how the machine works.
nUsers know and are able to avoid dangers.
nUsers are physically capable of controlling the machine.
In order to use the machine as intended and in a professional manner,
users must have the required technical (agricultural) knowledge.
Unless otherwise indicated, users may carry out all activities described
in these operating instructions themselves.
Certain activities should only be performed by service personnel, e.g.
work on braking systems. These activities are indicated in the operating
instructions by the symbol .
Service personnel within the meaning of these instructions are all per‐
sons who maintain and repair safety-relevant components. Service per‐
sonnel are qualied for these activities based on their training and
expertise (for example agricultural machine mechanics).
2.3 Hazardous areas
If the hazardous areas are not heeded, this may result in death or
serious injury to personnel.
Only once all persons have left the hazardous areas: Switch on drives
and motors.
Any work required while the motor or drive is running in a hazardous
area requires special attention and precautions. Follow the instructions
for action in these operating instructions exactly.
Labels on the machine indicate the hazardous areas Ä, see page 16.
Operator
Users
Service personnel
Safety
en-GB | Item no. 17514590 | BA 01/01.20218

The hazardous area of the machine during operation.
b
Moving hazardous area
b
The hazardous area includes the area in the direction of travel across
the entire width
b
of the machine.
►NEVER climb out of the tractor while it is moving.
►NEVER allow other persons to board the tractor while it is moving.
►In addition, maintain a safety distance of 2 m from the machine.
►While driving on the eld, observe the entire hazardous area. Stop
if required.
When standing between the tractor and machine, there is a risk due to
tractor movements or sudden machine movements.
►Secure the tractor against rolling away.
►Before operating the linkage: Keep all persons away from the
movement area of the linkage.
Moving hazardous area
Hazardous area between the tractor
and machine
Safety
en-GB | Item no. 17514590 | BA 01/01.2021 9

The parked machine may overturn. This may result in fatal or serious
injuries.
►Park the machine in transport position.
►Park the machine on rm and level ground only.
►Place a plate (metal, wood, stone) with sucient carrying capacity
under the stands.
The machine is equipped with components in which mechanical
energy is stored (e.g. springs, overload safety units). Uncontrolled
release of mechanical energy accelerates components like a projectile.
This may result in fatal or serious injuries.
►NEVER dismantle or open components that store mechanical
energy.
The hydraulic system is under high pressure. Leaking hydraulic oil can
penetrate through the skin into the body.
Risk of injury to body parts, face, eyes and unprotected skin areas
The hydraulic oil may be hot.
The hydraulic oil is harmful to health.
►When working on the hydraulic system:
Wear safety goggles and gloves.
►Check the condition of the hydraulic system according to the main‐
tenance schedule. Replace damaged or worn components of the
hydraulic system immediately.
►NEVER touch leaks without hand protection.
►If hydraulic oil has penetrated the body:
Seek medical attention immediately. Remove the hydraulic oil from
the body as quickly as possible. Risk of infection
2.4 Workplaces and passengers
The main workplace for working with the machine is the driver's seat in
the tractor. Further workplaces are described in the respective instruc‐
tions for action.
Dangerous situations may occur if several persons operate the machine
functions at the same time.
Parked machine
Risk of injury due to stored mechan‐
ical energy
Risk of injury at the hydraulic system
Workplaces
Safety
en-GB | Item no. 17514590 | BA 01/01.202110

►Observe the hazardous areas.
►Pay attention to other persons in the vicinity of the machine.
Passengers may fall from the machine and seriously injure themselves.
Scattered objects may hit and injure passengers.
►NEVER allow persons to ride along on the machine.
2.5 Technically perfect condition
Operational safety of the machine cannot be guaranteed without
proper preparations in accordance with these operating instructions.
This may result in fatal or serious injuries.
►Use the machine only after proper preparations.
Ä Chapter 4.2 ‘Preparing the tractor’ on page 29
If the technical limit values of the machine are not observed, the
machine will be damaged.
This may result in fatal or serious injuries.
►Adhere to machine-specic limit values Ä, see Technical
data page 79.
Passengers
Operation only after proper prepara‐
tions
Observe the technical limit values
Safety
en-GB | Item no. 17514590 | BA 01/01.2021 11

Damage to the machine can impair the operational safety of the
machine and cause accidents.
This may result in fatal or serious injuries.
To ensure that the machine is in a safe condition, carry out the fol‐
lowing measures:
►Inspect the machine according to the maintenance schedule
Ä, see page 68.
►Repair damage and eliminate causes of damage immediately.
►Remove coarse dirt.
If safety-relevant damage cannot be repaired in accordance with these
operating instructions:
►Have damage repaired by a qualied specialist workshop.
Structural modications and extensions can impair the functionality
and operational safety of the machine.
This may result in fatal or serious injuries.
Auxiliary equipment and spare parts that do NOT comply with the man‐
ufacturer's requirements may negatively aect the operational safety of
the machine and cause accidents.
►Modications and conversions may only be carried out with the
written consent of the manufacturer.
►Structural modications and extensions must only be carried out
by an authorised specialist workshop.
►Use original spare parts or parts approved by the manufacturer.
►Only use the auxiliary and operating materials listed
Ä, see page 82.
Improper welding work endangers the operational safety of the
machine.
This may result in fatal or serious injuries.
►Have welding work carried out by a qualied specialist workshop.
Danger due to damage to the
machine
Modications at the machine
Welding work
Safety
en-GB | Item no. 17514590 | BA 01/01.202112

2.6 Safe handling
2.6.1 Personal protective equipment
Carrying and wearing protective equipment is an important safety
component.
Lack of or inappropriate protective equipment increases the risk of
damage to health and injury to persons.
For certain work on the machine, the following protective equipment is
required in addition to suitable workwear:
nSafety gloves
Use protective equipment as follows:
►Only use protective equipment that is in proper condition.
►Only use protective equipment that provides eective protection.
►Adapt protective equipment to the respective person, e.g. size.
2.6.2 Driving the tractor-machine combination
Mounted or trailed machines change the driving characteristics of the
tractor.
The driving characteristics also depend on the operating status, the
lling or loading and on the subsoil.
If the driver does not consider changed characteristics, accidents may
occur.
►Observe changed driving behaviour when driving.
Ä Chapter 5 ‘Road travel’ on page 33
An insuciently secured and unattended tractor-machine combination
is a danger to persons, e.g. children playing.
►Before leaving: Stop the tractor-machine combination.
nEngage the parking brake.
nTurn o the engine.
nRemove ignition key.
►Before continuing to drive: Check the safe condition of the tractor-
machine combination again.
Ä Chapter 5 ‘Road travel’ on page 33
Dierent driving behaviour
Unattended parking
Safety
en-GB | Item no. 17514590 | BA 01/01.2021 13

2.7 Safety devices and labels
For the protection of the user, other persons and the machine, the
machine is equipped with special safety devices, e.g.:
nStabilisation
The actual equipment of the machine with safety devices depends on
the country-specic rules and regulations.
Ä Chapter 3.2.3 ‘Safety devices’ on page 18
Existing and fully functional safety devices protect against death or
serious personal injury.
►Replace damaged safety devices.
►Install dismantled safety devices before commissioning.
►Move the safety devices to the protective position.
►In case of doubt whether all safety devices are properly installed
and fully functional: Commission a specialist workshop.
Labels on the machine warn of dangers at danger points and belong to
the safety equipment of the machine.
Missing labels increase the risk of fatal and serious injury.
►Clean dirty labels.
►Replace damaged, illegible or lost labels immediately.
►Provide spare parts with the provided labels.
Ä Chapter 3.2.1 ‘Position of the label’ on page 16
Ä Chapter 3.2.2 ‘Meaning of the labels’ on page 16
Keeping the safety devices fully func‐
tional
Keeping the labels legible
Safety
en-GB | Item no. 17514590 | BA 01/01.202114