LENCO CRW-110WH User manual

1
Model: CRW-110WH
User Manual-Smart clock radio with color wake-up light
Gebruikershandleiding - Smart wekkerradio met wake-up light
Bedienungsanleitung Smarter Radiowecker mit Wake-up light
Mode d’emploi-Radio-réveil smart avec èclairage simulation lever de soleil
Manual de usuario - Radio reloj inteligente con luz de despertadora en color

2
Index
ENGLISH ·········································································································· 3
NEDERLANDS································································································· 23
DEUTSCH ······································································································· 45
FRANÇAIS ······································································································ 67
ESPAÑOL········································································································ 87
Version : 1.0

3
ENGLISH
CRW-110
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space
around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating
products or naked flame. The device can only be used in moderate climates. Extremely cold or warm
environments should be avoided. Working temperature between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device
following the instruction manual. During file transmission, please handle with care and operate in a static-free
environment.
6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the
product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason,
do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such
as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp,
water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit
stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any
power.
10. Although this device is manufactured with the utmost care and checked several times before leaving the factory,
it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive
build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power
socket immediately.
11. This device must operate on a power source as specified on the specification label. If you are not sure of the
type of power supply used in your home, consult your dealer or local power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you
may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the
device or battery replacement.
15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be
corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use
an USB extension cable because it can cause interference resulting in failing of data.
17. The rating label has been marked on the bottom or back panel of the device.
18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or
a lack of experience and knowledge, unless they’re under supervision or have received instructions about the
correct use of the device by the person who is responsible for their safety.
19. This product is intended for non professional use only and not for commercial or industrial use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position
vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual
will not be covered by warranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in
any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the
device, when the device has been exposed to rain or moisture, does not operate normally, or has been
dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

4
27. If the product is delivered with power cable or AC power adaptor:
⚫ If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
⚫ Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit
point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out
of children’s reach! When playing with the power cable, they can seriously injure themselves.
⚫ Unplug this device during lightning storms or when unused for a long period.
⚫ The socket outlet must be installed near the equipment and must be easily accessible.
⚫ Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
⚫ Devices with class 1 construction should be connected to a main socket outlet with a protective earthed
connection.
⚫ Devices with class 2 construction do not require a earthed connection.
⚫ Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can
cause a short circuit.
⚫ Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
⚫ “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
⚫ [The remote control supplied with] This product contains a coin/button cell battery. If the battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
⚫ Keep new and used batteries away from children.
⚫ If the battery compartment does not close securely, stop using the product and keep it away from
children.
⚫ If you think batteries might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
29. Caution about the use of Batteries:
⚫ Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
⚫ Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during
use, storage or transportation.
⚫ Replacement of a battery with an incorrect type that can result in an explosion or the leakage of
flammable liquid or gas.
⚫ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can
result in an explosion.
⚫ Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or that leakage of flammable liquid or gas.
⚫ A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas.
⚫ Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
•Unpack all parts and remove protective material.
•Do not connect the unit to the mains before checking the mains voltage and before all other connections have
been made.

5
When unpacking, ensure that the following elements are included:
1ⅹ Smart wake up light (with inserted 1ⅹCR2032 backup battery)
1ⅹ Micro USB cable
1ⅹ Power adapter
1ⅹ User manual
UNPACKING YOUR DEVICE

6
Your alarm clock operates on DC 5V 2A power.
1. Connect the USB cable to the power adapter and alarm clock.
2. Plug the power adapter to the power socket
only 1 of below adapters is included
Backup battery (1xCR2032)
A battery is inserted in your alarm clock to provide a back-up power source.
Take out the battery isolator stripe from the battery compartment after time is set with socket power.
Note: the Backup battery is only used to hold your settings and time during a power off. The alarm clock can’t be
operated when there is no power connection with DC 5V
OVERVIEW
SET UP

7
1. Download the App
⚫ Please search “TuyaSmart” in the App Store, Android Market, Google Play or scan the QR code below to
download
Please note that the design of the interface may change during time because of Tuya updating the app on regular
bases. The screenshots shown in this manual are taken from the IOS version.
2. Register & Login to your Tuya account
⚫ Follow the registration steps in the Tuya app to register your account.
⚫ Login when you have registered successfully or if you have a Tuya account already.
3. Add the device ~
⚫ When the Lenco clock is powered up for the first time, the hour will blink and the will blink rapidly
⚫ Follow the below screenshot steps to add the device to your Tuya account:
TUYA SMART APP CONTROL

8
Note:
⚫ If the icon on the device is NOT blinking rapidly, press and hold the button for 5 seconds until it is.
⚫ If you want to turn off/on the wifi functionality of the clock, Press and hold the button for 5 seconds (the
icon will be off when the wifi is disabled.)
Note: The Tuya devices will only work on 2.4GHz networks!

9
Select a Wi-Fi hotspot that
can connect to the internet
in the device’s working area,
Enter the Wi-Fi password
and tap confirm

10
4. App operations
⚫ After the device is connected successfully, the device state is synchronized with the APP display. Click each
function icon to enter the setting page of this function.
⚫ All functions of the device can be controlled and set through the APP. (Please note that the app screens
are English only)

11

12
What you need to get started
⚫ Stable Wi-Fi network which could access to Amazon server.
⚫ An Echo device, including Echo, Echo Tap, or Echo Dot.
⚫ An Amazon account.
⚫ Tuya app and a related account.
⚫ Smart device, like this CRW-110
Alexa setting
1. Download "Amazon Alexa" in App Store or Google Play, login your account and password (please register
firstly if you don’t have an account yet).
2. Enter the “ Skill “ Interface in the Alexa App, search “ Tuya smart“ and choose it among results, then enable
it.
VOICE CONTROL – AMAZON ALEXA

13
3. Enter your “Tuya Smart” account credentials and password to log in and authorize Alexa to acquire relevant
information. The page shows that “ Tuya smart has been successfully Linked “ if the authorization was
successful
4. You can now use Echo speaker to control the Tuya smart devices.
Control commands
You can use the following commands to control your device.
IMPORTANT: Replace "the device" by the product name in the Tuya APP. For example: Wakeup light
Descriptions
Functions
Voice Commands
Light mode
Turn on the light
Alexa, turn on “the device”
Turn off the light
Alexa, turn off “the device”
1. Green light
Alexa, set “the device” to green
2. Red light
Alexa, set “the device” to red
3. Blue light
Alexa, set “the device” to blue
4. Pink light
Alexa, set “the device” to pink
5. Orange light
Alexa, set “the device” to orange
6. Light blue light
Alexa, set “the device” to light blue
7. Color changing automatically
Alexa, set “the device” to auto color
Light brightness
Adjust the light brightness
Alexa, set “the device” to 1-100 percent
Display brightness
Turn off the time display
Alexa, set “the device” screen mode to off
In low display brightness
Alexa, set “the device” screen mode to low
In high display brightness
Alexa, set “the device” screen mode to high
What you need to get started
Before you can start using Google Home to control your devices, make sure you meet the following conditions.
⚫ A Google Home device, Android or IOS phone with Google Assistant.
⚫ Latest Google Home app.
⚫ Latest Google app
⚫ A Google account.
⚫ The device display language must be set to English US.
⚫ Tuya smart app and a related account.
⚫ Smart device, like this CRW-110.
Google Home setting
1. Download "Google Home" in the App Store or Google Play, log into your account and password (please register
firstly if you don’t have an account).
2. Enter "Home Control" interface in Google Home app, enter "+" to search "Smart Life" in the list.
3. Employ the account and password of “Tuya Smart” to log in, and authorize Google Home to acquire relevant
information. The page shows that “ Smart Life has been successfully Linked “ after successful authorization.
4. You can use your Google speaker to control the smart device.
Control command
You can use the following commands to control your device.
VOICE CONTROL – GOOGLE HOME

14
IMPORTANT: Replace "the device"by the product name in the Tuya APP. For example: Wakeup light

15
Descriptions
Functions
Voice Commands
Light mode
Turn on the light
Ok google, turn on “the device”
Turn off the light
OK google, turn off “the device”
1. Green light
Ok google, set “the device” to green
2. Red light
Ok google, set “the device” to red
3. Blue light
Ok google, set “the device” to blue
4. Pink light
Ok google, set “the device” to pink
5. Orange light
Ok google, set “the device” to orange
6. Light blue light
Ok google, Set “the device” to light blue
7. Color changing automatically
Ok google, set “the device” to auto color
Light brightness
Adjust the light brightness
Ok google, set “the device” to 0-100 percent
Display brightness
Turn off the time display
Ok google, set “the device” screen mode to
off
In low display brightness
Ok google, set “the device” screen mode to
low
In high display brightness
Ok google, set “the device” screen mode to
high
CLOCK
Time setting
When the alarm clock is connected to power for the first time, the display flashes.
1. When the hours flash, use or to set the hours. Press to confirm and continue.
2. When the minutes flash, use or to set the minutes. Press to confirm and continue.
3. will display, use or select network timing or not. Press to confirm.
4. To restart the time setting mode, long press until the hours start to flash and repeat setting as mentioned
above.
Note: if there is no operation for 10 seconds in time setting mode, it will exit automatically without saving
Display brightness
Press to choose display brightness: low, high or off. Default is high.
ALARM
Alarm time setting
BUTTONS CONTROL

16
1. Press to activate or deactivate the alarm. The alarm icon will be displayed when alarm is activated,
and the alarm time will be displayed shortly.
2. Press and hold to set the alarm time.
3. When the hours flash, press or to set the hours. Press to confirm and continue.
4. When the minutes flash, press or to set the minutes. Press to confirm and continue.
Alarm mode
5. Press or to select the alarm mode F1, F2 or F3. (F1=Sunrise Light + Sound; F2=Sunrise Light only;
F3=Sound only)
6. Press to confirm and continue.
Alarm sound
7. Use or to set a alarm sound (1-8 = preset sound, 9 = recording voice, 10 = FM radio)
8. Press to confirm and continue.
Alarm Volume
9. Use or to set the volume level between 01 to 15 (Default is level 05).
10. Press to confirm and continue.
Sunrise light brightness
11. Use or to set the brightness of sunrise light between 01 to 30 (Default is level 10).
12. Press to confirm and finish alarm setting.
Please following the above steps to set .
Note: if there is no operation for 10 seconds in alarm setting mode, it will exit automatically without saving
Voice recorder
1. Press and hold until is displayed and you hear a beep sound.
2. Keep pressing and start your voice recording.
3. Release to finish the recording and your voice is stored as the 9th alarm sound after you hear 2 beeps
4. Press to listen to the recording. Press to quit. (It will exit automatically after 30 seconds.)

17
Note: The voice recorder function is NOT available when snooze is working.
Snooze function
When the alarm sounds, press to snooze the alarm and/or sunrise for 5 minutes.

18
Sunrise light simulation
On alarm mode F1 or F2, the sunrise will start 30 minutes prior the configured alarm time, gradually increasing to
reach the selected brightness at your configured alarm time. You need to activate the alarm before you go to sleep.
At the alarm time, sounds and/or light will last for 5 minutes. You can press any button except to stop the
alarm for 24 hours. Alarm will still work normally at the configured alarm time, the next day (if the or is
kept highlighted on the display)
Note: When the sunrise alarm function is active
1. Pressing or will stop the sunrise simulation and fix at the current brightness level.
2. Long pressing will turn off the sunrise light.
SUNSET LIGHT SIMULATION
Under mode F1 or F2 the sunset light starts at the selected brightness/sound volume with flashing and gradually
fades to off over the selected minutes. When is faded off the symbol disappears.
Sunset mode
1. Press , the symbol appears and the display flashes.
2. Use or to select sunset mode F1, F2 or F3. (F1=Sunset Light + Sound, F2= Sunset Light, F3= Sound).
3. Press again to confirm and continue.
Sunset sound
4. Use or to set a sunset sound (1-8 is preset sound, 9 is recording voice,10 is FM radio)
5. Press again to confirm and continue.
Sound volume
6. Use or to set the volume from 01 to 15 levels (Default is level 05).
7. Press again to confirm and continue.
Sunset light brightness
8. Use or to set the brightness of sunset light from 01 to level 30 (Default is level 10).
9. Press again to confirm and continue.
Sunset time
10. Use or to select 15 or 30 or 60 as the sunset fading minutes.

19
11. Press again to confirm and finish the sunset setting.
Note: if there is no operation for 10 seconds in alarm setting mode, it will exit automatically without saving
When sunset mode is active:
1. Press or / or would stop brightness/sound changing and fix at your adjust level and then get
off at selected time.
2. Long press to turn off both the light and/or sound directly.
3. Long press for 5 seconds will turn on/off the wifi function.
BEDSIDE LIGHT
Your alarm clock can be used as a dimmable or coloured bedside light.
1. Press to turn on white light.
2. Use or to adjust the white light brightness level up to 30 (Default is level 10).
3. Press a second time to enable the color changing mode.
Use or to select your favorite color from green, red, blue, pink, orange, light blue.
4. Long press or to adjust the brightness level of the current selected color. Max level is 30 (Default is
level 10).
5. Press a third time to turn off the light.
RADIO
When using the radio function for the first time, it must scan for available radio stations on the frequency range
87.5-108MHz.
1. Press to turn on/off radio.
2. Long press for 3 seconds to start auto scanning for available stations.
When a station is found and you would like to keep it as a preset station, press within 5 seconds to save
the station. (presets will be stored incremental from 1 up to 20). The radio will then continue with the auto-scan
after 5 seconds of no operation.
3. When the scan is finished you can long press or to select one of the saved preset stations.
4. Short press or to fine tune a station (one step is 0.1MHz).
5. Use or to set the desired volume (00 up to level 15)

20
Noted:
1) To get a good radio signal, fully unwind antenna and move it around until you get good reception.
2) When the preset stations are full, the display will shows “FUL”
3) When you want remove all presets and restart an auto scan, Long press for 3 seconds.
CHARGING A MOBILE PHONE
Connect your phones usb charging cable to the USB port on the backside of the clock.
Troubleshooting
WARNING: Never open the unit to keep the warranty valid and never try to repair the product yourself.
Before requesting any service, please check these possible resolutions.
Problem
Possible solution
The unit is not turning on
Ensure the USB cable and adaptor are connected correctly.
The buttons are not
responsive
Disconnect the power adaptor to restart the unit.
The unit did not save the
original time during a
power failure
Change the back-up battery (CR-2032)
Less radio stations found
Fully unwind antenna and move it around until you get good reception.
Technical Specifications
Input adaptor
100-240VAC 50/60Hz
Speaker output
Batteries in unit
3W±10%*1
CR2032*1
Power consumption
10W(Max.)
Power consumption (standby)
1.2W±10%
Operating Temperature
0°C-35°C
Operating position
Horizontal
Dim. unit
170*110*180 mm(main device)
173*110*205 mm (Gift box)
Weight
0.43KG (main device)
Power supply adaptor: (For EU only)
Manufacturer:
DONG GUAN HP-POWER TECHNOLOGY., LIMITED
Model Number:
HP12U-0502000-CEU
Use only original AC adaptor
Information
Value and and precision
Manufacturers name or trade mark, commercial
registration and address
DONG GUAN HP-POWER TECHNOLOGY., LIMITED
NO. 8, Shui Lin Road, TangXia Town, DongGuan City,
Guang Dong Province, China
Model Identifier
HP12U-0502000-CEU
Input voltage
100-240V
Input AC frequency
50/60Hz