POWER SUPPLY
AC power : 230V ~ 50 Hz
DC power : 3V battery type "AAA" (not provided) for clock back-up system only. An
alkaline type battery is recommended. For optimum performance, this battery should be
replaced every 6 months.
1. Insert the AC power cord into a convenient standard AC wall outlet.
2. Connect the 2 x 1.5V battery inside the compartment at the bottom of the unit .
TO SET THE TIME
Hold the TIME button for 2 seconds and press HOUR > (+) or < HOUR (-) to set the
hour digit, hold the TIME for 2 seconds and press MINUTE > (+) or < MINUTE (-) to set
the minute digit.
TO POWER ON RADIO
Press the RADIO button to turn the radio on, press again to turn off.
LISTEN TO THE RADIO
1. Press the RADIO button to turn the radio on.
2. Adjust the TUNING control to select the desired radio station.
3. Adjust the VOLUME Control for a desired listening level.
4. To turn off the radio, press RADIO button.
SETTING THE ALARM
Hold the ALARM 1-SET/OFF button for 2 seconds and press HOUR > (+) or
< HOUR (-) to set the ALARM 1 hour digit, hold the ALARM-SET/OFF and
press MINUTE > (+) or < MINUTE (-) to set the ALARM 1 minute digit.
Hold the ALARM 2-SET/OFF button for 2 seconds and press HOUR > (+) or
< HOUR (-) to set the ALARM 2 hour digit, hold the ALARM 2-SET/OFF and press
MINUTE > (+) or < MINUTE (-) to set the ALARM 2 minute digit, the ALARM 2 will
show on alarm display when ALARM 2-SET/OFF button is pressed.
SETTING THE WAKE MODE
Switch the ALARM 1-AUTO/BUZZER/OFF and or ALARM 2-AUTO/BUZZER/OFF to
select the mode below:
AUTO: will wake up by radio when the time reach
BUZZER: will wake up by buzzer when the time reach
OFF: no wake up
The ALARM 1 standby indicator or ALARM 2 standby indicator on the real time display
become on when select AUTO or BUZZER.
SNOOZE FUNCTION
When the radio or buzzer sounds, press the SNOOZE to temporarily stop for 9min
until alarm reach, press ALARM 1-SET/OFF to terminate the ALARM 1,
press ALARM 2-SET/OFF to terminate the ALARM 2.
GB 2
