LENCO PDR-060WD User manual

Model No.: PDR-060WD
User manual - DAB+, FM radio with Bluetooth and rechargeable battery
Gebruikshandleiding - DAB+, FM-radio met bluetooth en oplaadbare batterij
Benutzeranleitung –DAB+, UKW-Radio mit Bluetooth und wiederaufladbarem Akku
Manuel d’utilisation - Radio DAB+, FM avec Bluetooth et batterie rechargeable
Manual de usuario - Radio DAB+ y FM con Bluetooth y batería recargable
Brugervejledning - DAB+, FM-radio med Bluetooth og genopladeligt batteri
Användarmanual –FM-radio med DAB+, Bluetooth och uppladdningsbart batteri

Index
English........................................................................................................ 3
Nederlands................................................................................................19
Deutsch.....................................................................................................38
Français.....................................................................................................58
Español......................................................................................................77
Dansk/Norsk .............................................................................................96
Svenska ...................................................................................................114
Version: 1.0

3
English
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a
shelf, leave 5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves,
candles and other heat-generating products or naked flame. The device can
only be used in moderate climates. Extremely cold or warm environments
should be avoided. Working temperature between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply
reset and restart the device following the instruction manual. During file
transmission, please handle with care and operate in a static-free
environment.
6. Warning! Never insert an object into the product through the vents or
openings. High voltage flows through the product and inserting an object can
cause electric shock and/or short circuit internal parts. For the same reason,
do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
8. The device shall not be exposed to dripping or splashing and make sure that
no objects filled with liquids, such as vases, are placed on or near the
apparatus.
9. Do not use this device when condensation may occur. When the unit is used in
a warm wet room with damp, water droplets or condensation may occur
inside the unit and the unit may not function properly; let the unit stand in
power OFF for 1 or 2 hours before turning on the power: the unit should be
dry before getting any power.
10. Although this device is manufactured with the utmost care and checked
several times before leaving the factory, it is still possible that problems may
occur, as with all electrical appliances. If you notice smoke, an excessive build-
up of heat or any other unexpected phenomena, you should disconnect the
plug from the main power socket immediately.
11. This device must operate on a power source as specified on the specification
label. If you are not sure of the type of power supply used in your home,
consult your dealer or local power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based
fluids.
14. To remove severe stains, you may use a damp cloth with dilute detergent.
15. The supplier is not responsible for damage or lost data caused by malfunction,
misuse, modification of the device or battery replacement.
16. Do not interrupt the connection when the device is formatting or transferring
files. Otherwise, data may be corrupted or lost.

4
17. If the unit has USB playback function, the USB memory stick should be plugged
into the unit directly. Don’t use an USB extension cable because it can cause
interference resulting in failing of data.
18. The rating label has been marked on the bottom or back panel of the device.
19. This device is not intended for use by people (including children) with physical,
sensory or mental disabilities, or a lack of experience and knowledge, unless
they’re under supervision or have received instructions about the correct use
of the device by the person who is responsible for their safety.
20. This product is intended for non professional use only and not for commercial
or industrial use.
21. Make sure the unit is adjusted to a stable position. Damage caused by using
this product in an unstable position vibrations or shocks or by failure to follow
any other warning or precaution contained within this user manual will not be
covered by warranty.
22. Never remove the casing of this device.
23. Never place this device on other electrical equipment.
24. Do not allow children access to plastic bags.
25. Only use attachments/accessories specified by the manufacturer.
26. Refer all servicing to qualified service personnel. Servicing is required when
the device has been damaged in any way, such as the power supply cord or
the plug, when liquid has been spilled or objects have fallen into the device,
when the device has been exposed to rain or moisture, does not operate
normally, or has been dropped.
27. Long exposure to loud sounds from personal music players may lead to
temporary or permanent hearing loss.
28. If the product is delivered with power cable or AC power adaptor:
⚫If any trouble occur, disconnect the AC power cord and refer servicing
to qualified personnel.
⚫Don’t step on or pinch the power adaptor. Be very careful, particularly
near the plugs and the cable’s exit point. Do not place heavy items on
the power adaptor, which may damage it. Keep the entire device out of
children’s reach! When playing with the power cable, they can seriously
injure themselves.
⚫Unplug this device during lightning storms or when unused for a long
period.
⚫The socket outlet must be installed near the equipment and must be
easily accessible.
⚫Do not overload ac outlets or extension cords. Overloading can cause
fire or electric shock.
⚫Devices with class 1 construction should be connected to a main socket
outlet with a protective earthed connection.
⚫Devices with class 2 construction do not require a earthed connection.
⚫Always hold the plug when pulling it out of the main supply socket. Do
not pull the power cord. This can cause a short circuit.
⚫Do not use a damaged power cord or plug or a loose outlet. Doing so
may result in fire or electric shock.

5
29. If the product contains or is delivered with a remote control containing
coin/cell batteries:
Warning:
⚫“Do not ingest battery, Chemical Burn Hazard” or equivalent working.
⚫[The remote control supplied with] This product contains a coin/button
cell battery. If the battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
⚫Keep new and used batteries away from children.
⚫If the battery compartment does not close securely, stop using the
product and keep it away from children.
⚫If you think batteries might have been swallowed or placed inside any
part of the body, seek immediate medical attention.
30. Caution about the use of Batteries:
⚫Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
⚫Battery cannot be subjected to high or low extreme temperatures,
low air pressure at high altitude during use, storage or transportation.
⚫Replacement of a battery with an incorrect type that can result in an
explosion or the leakage of flammable liquid or gas.
⚫Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
⚫Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or that leakage of
flammable liquid or gas.
⚫A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
⚫Attention should be drawn to the environmental aspects of battery
disposal.
INSTALLATION
•Unpack all parts and remove protective material.
•Do not connect the unit to the mains before checking the mains voltage and
before all other connections have been made

6
Charge lnstructions:
Fully charge the radio using the supplied AC adapter (9V/2A) prior to the first use.
A solid red LED light (under charging port) indicates that the device is charging. When
fully charged the LED indicator will turn green.
Content in the box:
DAB Radio
Remote Control
Adaptor
Audio Cable
User Manual
Model No.: PDR-060WD

7
Function description
●This product is a comprehensive portable stereo digital multimedia speaker device,
integrating DAB, Bluetooth, FM, USB and TF card playback
●Supports Band III DAB/DAB+ digital signal reception
●Supports Band II 87.5-108 MHz FM reception with RDS function
●Supports 5.0 standard Bluetooth version
●With 2.8 inch TFT color display
●With real-time clock function and automatic time update through DAB
●Two sets of alarm clock function with optional DAB/FM/Buzzer alarm sound source
●Built-in 7.4V/1800mAH rechargeable lithium battery
●Supports multi-language (nine languages) system operation

8
Product View

9

10
1. Standby button: Press it to enter/exit standby mode.
2. Volume knob/Mute button: Turn the knob -- Adjust volume Short press -- Mute
3. Alarm button: Press it to enter Alarm clock set up interface.
4. Shortcut button 1/2/3:
Short press 1/2/3 button to go to preset list radio station 1/2/3 directly.
Long press 1/2/3 button to add current radio station into the preset list 1/2/3.
5. MENU.INFO button
Short press -- Show DAB information Long press -- Enter menu set up
6. SCAN button
DAB/FM mode: Long press -- Automatic searching radio stations.
BT/USB/SD mode: Short press -- Play/Pause
7. SKIP-(Previous)/SLEEP/SNOOZE button FM/BT/USB/SD mode:
Short press -- SKIP-(Previous)
Alarm clock mode: When the alarm rings, short press to activate snooze
function. All modes: Long press -- Enter Sleep timer set up interface.
8. TUNE knob/ENTER button Turn the knob -- Skip+/- Short press -- Enter
DAB/FM mode: Long press -- Automatic searching radio stations.
9. PRESET button
DAB/FM mode: Short press -- Go to preset radio station list.
Long press -- Add current radio station to preset radio list.
10. MODE.LUM button
Short press -- Switch between DAB/FM/AUX/BT/SD/USB modes.
Long press -- Adjust the display brightness level 1-2-3
11. SKIP+(Next)/SLEEP/SNOOZE button FM/BT/USB/SD mode:
Short press -- SKIP+(Next)
Alarm clock mode: When the alarm rings, short press to activate snooze
function. All modes: Long press -- Enter Sleep timer set up interface.
12. 2.8 inch TFT color display
13. Speaker
14. Remote sensor
15. USB port
16. 3.5mm Headphone jack
17. 3.5mm Aux-in jack
18. Antenna
19. Power switch
20. Charging port
21. Micro SD card (TF card) port

11
Remote Control Schematic
1. Standby key: short press to enter function mode/standby mode.
2. Scan key: DAB & FM mode: short press to search for radio stations.
3. Clock setting key: short press to enter Time&Date setting interface.
4. ALARM key: short press to enter alarm setting interface.
5. MENU key: short press to enter menu settings interface.
6. INFO key: short press to check information.
7. Numeric keys: in combination with the numbers 0-9, select the station or song
number.
8. SKIP-
9. Mute key
10. Mode key
11. Sleep timer
12. Snooze key: when the alarm rings, short press to enter snooze function.
13. ENTER key: DAB/FM mode - Confirm, BT/USB/SD mode-Play or pause, Menu
mode - Confirm/Enter
14. BACK key: short press to return.
15. Brightness key: press it to adjust the display brightness level 1-2-3
16. VOL +
17. VOL -
18. PRESET key: short press --- recall radio list, long press --- add current radio
station to the radio list.
19. SKIP +
01
02
03
04
05
06
07
09 10
11 12
13
14
15
16
17
18
08
19

12
Power ON/OFF
When using this radio, please pull out the telescopic antenna. Move the power
switch on the back of the device to ON/OFF side to power on/off the device.
DAB Radio
1. Upon being powered on, the device will go to DAB mode automatically and will
start searching for available DAB stations, which will be stored after the search
is complete. (If the device has already searched for radio stations, you can also
press and hold the SCAN button to perform automatic searching).
2. Rotate the TUNE knob to select your desired DAB station, then press the
ENTER(TUNE) button to play. Rotate the VOLUME knob to adjust volume.
Press the MUTE(VOLUME) knob to mute sound.
3. Short press the MENU•INFO button to view the current station information:
text information, signal strength, program type, episode name, channel
number/frequency, signal error rate, bit rate, time and date, etc.
4. Saving stations into preset mode:
(1) Long press SCAN button (if a full scan was previously done please move to step 2)
(2) Find the radio station by rotating the TUNE knob.
(3) Select the channel you want to save, and press the ENTER button to enter.
(4) Press and hold the PRESET button for 3 seconds.
(5) Pick one of the available (Empty) slots from the preset store screen.
(6) Press the ENTER button to save the channel.
You also can press and hold the Shortcut button 1/2/3 to add current radio
station into the preset list 1/2/3.
5. Short press the PRESET button to recall preset radio list. Rotate the TUNE knob
to select DAB station, then press the ENTER button to play. (You also can press
the Shortcut button 1/2/3 to go to preset list radio station 1/2/3 directly).
Note: Please press the PRESET button to access your preset radio stations in DAB
mode, otherwise the stations will display in automatically set order.
IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio reception is different from FM radio reception.
•In FM, you can often still receive a weak station, but probably with a rustling or
crackling sound.
•DAB + reception works digitally and if there is not enough signal you hear
nothing. No hiss or crackle as with FM. This is not due to the radio, but to the
fact that there is not enough DAB+ signal at that location.
•DAB + rule is: no or weak reception = no sound.

13
What can you do if you do not have direct DAB+ reception.
•Always point the antenna straight up vertically first.
•Do not place the radio too close to potential sources of interference such as,
battery chargers, rotating machinery, computers, large metal surfaces, etc.
•Move the radio a few meters.
•Turn on the radio and activate a full scan in the DAB+ menu
•In the display of the radio you will see the progress of the scan and the number
of stations found in the current position of the radio.
Important
•With DAB+ reception, there can be a very big difference in reception level
between one location and "a few meters away". In case of a local weak DAB+
signal, move the radio to find a stronger signal.
•If you take the radio to another location, perform a full scan again. This will
show you which DAB+ stations can be received there.
FM Radio
1. Press the MODE.LUM button to switch to FM mode.
2. Press and hold the SCAN button for 2~3 seconds to start automatic searching
for FM radio channels. Available channels will be stored after the search is
completed. Scan Setting: Press and hold the MENU•INFO button for
2~3 seconds to enter menu set up list. Rotate the TUNE knob to select
“Scan Setting”, press the ENTER button to confirm and enter. Rotate the TUNE
knob to select All stations/Strong stations, and press the ENTER button to
confirm. If select All stations, all available channels will be stored after the
search is completed. If select Strong stations, only strong signal radio stations
will be stored after the search is completed.
3. Press the PRESET button to go to the stored Radio station list, then rotate the
TUNE knob to select the desired station and press the ENTER button to play.
You also can press the Shortcut button 1/2/3 to go to preset list radio station
1/2/3 directly.)
4. Rotate the TUNE knob to adjust radio frequency by 0.05MHz at a time. Rotate
the TUNE knob and hold it for 3 seconds to start automatic searching for
next/previous radio station.
5. Long press the PRESET button to add current radio station to the radio list,
rotate the TUNE knob to select list number you want to use, then press the
ENTER button to confirm. You also can press and hold the Shortcut button
1/2/3 to add current radio station into the preset list 1/2/3.

14
Bluetooth music play
1. Press the MODE.LUM button to switch to Bluetooth mode.
2. To use your Bluetooth enabled device, make sure the Bluetooth function is
enabled, then search for “Lenco PDR-060”on the list and click on it to connect.
3. Play music or any audio files from your Bluetooth enabled device. Rotate the
TUNE knob (or press the SKIP button) to go the next/previous track, turn the
volume knob to adjust volume.
4. Press the ENTER button to play/pause music. Press the VOLUME knob to mute
sound.
5. Long press the ENTER button to disconnect Bluetooth
This product operates at 2400 - 2483.5 MHz and is designated only to be used inside
a normal household environment. This product is suited for this purpose within all
EU counties.
“This product has a bluetooth reception function, you can not transmit any
bluetooth sound with it: this means that you can receive wirelessly a bluetooth
sound signal from an external source like a smartphone.”
USB/micro SD card playback
1. Insert USB/micro SD card, and press the MODE.LUM button to switch to
USB/SD mode. It will play music from USB/micro SD automatically (Largest
capacity of USB/micro SD the device can support 256GB).
2. Rotate the TUNE knob (or press the SKIP button) to go the next/previous song.
3. Turn the VOLUME knob to adjust volume.
4. Press the ENTER button to play/pause music. Press the VOLUME knob to mute
sound.
5. Press the PRESET button to switch to loop playback mode. There are currently
three switchable: Repeat All/Repeat one/Random.
6. Supports audio decoding format: MP3/WAV/FLAC/WMA/APE.
System Set up
Press and hold the MENU•INFO button for 2~3 seconds to enter menu set up list.
Rotate the TUNE knob to select the sub-menu items, press the ENTER button to
confirm and enter. During operation, short press the IMENU•INFO button to return.
Time and Date Set up
A- In DAB radio mode, if DAB signal can be searched, the device will automatically
set the local time.
B- Manual Time Set up:

15
Press and hold the MENU•INFO button for 2~3 seconds to enter menu set up
list. Rotate the TUNE knob to select <Time/Date>, press the ENTER button to
enter. Rotate the TUNE knob to select <Set Time/Date>/<Set Hour System>/
<Set Date Format>/<Clock style>/<Auto Update>.
Set Time/Date: Press the ENTER button to enter time & date set up: Date - Month -
Year - Hour- Minute (rotate the TUNE knob to select the numbers and press the
ENTER button to confirm.)
Set Hour System: Press the ENTER button to enter 24h/12h set up, rotate the TUNE
knob to select and press the ENTER button to confirm.
Set Date Format: Press the ENTER button to enter Date Format setting, rotate the
TUNE knob to select and press the ENTER button to confirm.
Alarm clock Set up
This device can set 2 sets alarms.
1. Press the ALARM button to enter alarm clock setting.
2. Rotate the TUNE knob to select Alarm 1/Alarm 2, and press the ENTER button
to confirm.
Alarm: Press the ENTER button to select ON/OFF
Time: Press the ENTER button to enter alarm time setting, rotate the TUNE
knob to select the numbers, press the ENTER button to confirm.
Source: Press the ENTER button to enter, then rotate the TUNE knob to select
FM/DAB/Buzzer as alarm source, press the ENTER button to confirm.
Repeat: Press the ENTER button to enter, then rotate the TUNE knob to select
Once/Daily/Weekends/Workday, press the ENTER button to confirm.
Volume: Press the ENTER button to enter, then rotate the TUNE knob to select
alarm volume. press the ENTER button to confirm.
3. When the alarm clock rings, press the snooze button to activate snooze
function. After 5 min, the alarm will ring again.
4. Press the ALARM button (or press the STANDBY button) to stop alarm clock, the
device goes into standby mode.
Sleep Timer Set up
1. Press and hold the MENU•INFO button for 2~3 seconds to enter menu set up
list, rotate the TUNE knob to select SLEEP, then press the ENTER button to
enter sleep timer setting.
2. Rotate the TUNE knob to select 15 minutes/30 minutes/…/2 Hours.
3. Press the ENTER button to confirm sleep timer setting.
4. The device will go to standby mode after 15 minutes/30 minutes/…/2 Hours.
(if you select “OFF” and then press the ENTER button, sleep timer will be
turned off).

16
Specifications
•Output power: RMS 10W
•Signal to noise ratio: ≥70dBA
•Distortion: ≤5%
•Frequency response: 100HZ-18KHZ
•Audio input interface: DAB, FM, BT, USB, TF, Aux
•Adjustment form: Button or Remote
•Input power: 7.4V/1800mAh rechargeable lithium ion battery
•USB/Micro SD maximum input sensitivity: 0dBm
•DAB receiving input sensitivity: -97dBm
•FM receiving input sensitivity: -105dBm
•Working environment temperature: -10ºC ~ 50 ºC
•Storage temperature: -20ºC ~ 70 ºC
•Product size specification: 120*120*185 mm
•Product Net weight: about 1.2kg
Power supply adaptor
Use only the power supply listed in the user instructions
Information
Value and precision
Manufacturers name or trade mark,
commercial registration and address
Shenzhen Fushigang Technology Co., Ltd
Model Identifier
AS1801A-0902000EU
Input voltage
100-240 VAC
Input AC frequency
50/60 Hz
Output voltage
9 VDC
Output current
2.0 A
Output Power
18.0 W
Average active efficiency
>85.00%
Efficiency at low load (10%)
>70.92%
No load Power consumption
<=0.1W

17
1. Guarantee
Lenco offers service and warranty in accordance to European law, which means that
in case of repairs (both during and after the warranty period) you should contact
your local dealer.
Important note: It is not possible to send products that need repairs to Lenco
directly.
Important note: If this unit is opened or accessed by a non-official service center in
any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
2. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this documentation may differ
slightly from your particular situation. All items described in this guide for illustration
purposes only and may not apply to particular situation. No legal right or
entitlements may be obtained from the description made in this manual.
3. Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To
ensure the correct waste treatment of the product and battery,
please dispose them in accordance to any applicable local laws of
requirement for disposal of electrical equipment or batteries. In so
doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of
electrical waste (Waste Electrical and Electronic Equipment
Directive).
4. DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type [Lenco PDR-060] is in
compliance with directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
https://commaxx-certificates.com/doc/pdr-060_doc.pdf
Type RF
Frequency range (MHz)
Power (dBm)
Bluetooth
2402-2480
< 6
DAB
174-240
-

18
FM
87.5-108
-
5. Service
For more information and helpdesk support, please visit
www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands

19
Nederlands
VOORZICHTIG:
Het gebruik van bedieningen of afstellingen of het uitvoeren van procedures anders
dan hierin gespecificeerd, kan leiden tot blootstelling aan gevaarlijke straling.
VOORZORGSMAATREGELEN VÓÓR GEBRUIK
NEEM MET DE VOLGENDE INSTRUCTIES IN ACHT:
1. Bedek of blokkeer geen van de ventilatieopeningen. Als u het apparaat op een
schap plaatst, dient u voor 5 cm (2") vrije ruimte rondom het gehele apparaat
te zorgen.
2. Installeer in overeenstemming met de meegeleverde gebruikshandleiding.
3. Houd het apparaat uit de buurt van warmtebronnen zoals radiatoren, kachels,
fornuizen, kaarsen en andere warmtegenererende producten of open vuur.
Het apparaat kan alleen worden gebruikt in gematigde klimaten. Extreem
koude of warme omgevingen dienen te worden vermeden.
Bedrijfstemperatuur tussen 0° en 35°C.
4. Gebruik het apparaat niet in de buurt van krachtige magnetische velden.
5. Elektrostatische ontlading kan de normale werking van dit apparaat verstoren.
In dit geval kunt u het apparaat gewoon resetten en opnieuw starten volgens
de gebruiksaanwijzingen. Wees voorzichtig tijdens bestandsoverdracht en
voer dit uit in een omgeving zonder statische interferentie.
6. Waarschuwing! Steek geen voorwerpen in het product via de ventilatie- of
andere openingen. Er is hoge spanning aanwezig in het product en als u er een
voorwerp insteekt, kan dat tot elektrische schokken en/of kortsluiting van de
interne onderdelen leiden. Laat om dezelfde reden geen water of vloeistof op
het product terechtkomen.
7. Gebruik het apparaat niet in natte of vochtige ruimtes zoals badkamers,
keukens met veel stoom of in de buurt van zwembaden.
8. Stel het apparaat niet bloot druppels of spetters en zorg ervoor dat er geen
met vloeistof gevulde voorwerpen, zoals vazen, op of in de buurt van het
apparaat worden geplaatst.
9. Gebruik dit apparaat niet als er condensatie kan optreden. Wanneer het
apparaat in een warme en vochtige kamer wordt gebruikt, dan kunnen er
waterdruppeltjes of condensatie binnenin het apparaat worden gevormd
waardoor het apparaat mogelijk niet meer goed werkt; houd en
apparaat 1 of 2 uur op UIT staan voordat u de voeding weer inschakelt: het
apparaat dient droog te zijn voordat deze stroom ontvangt.
10. Al is dit apparaat met de grootste zorg vervaardigd en meerdere keren
gecontroleerd voordat deze de fabriek verlaat, is het toch mogelijk dat er
problemen optreden, zoals bij alle elektrische apparaten. Als u rook,
overmatige warmteontwikkeling of andere onverwachte verschijnselen
constateert, dient u onmiddellijk de stekker uit het stopcontact te trekken.
11. Dit apparaat moet van stroom worden voorzien door een bron zoals
gespecificeerd op het nominale specificatielabel. Als u niet zeker weet welk
type stroomvoorziening in uw huis wordt gebruikt, neem dan contact op met
uw dealer of het plaatselijke energiebedrijf.
12. Houd uit de buurt van dieren. Sommige dieren knauwen graag aan
voedingskabels.
13. Gebruik een zachte, droge doek om het apparaat schoon te maken. Gebruik
geen oplosmiddelen of vloeistoffen op benzinebasis.

20
14. U kunt een vochtige doek met verdund schoonmaakmiddel gebruiken om
hardnekkige vlekken te verwijderen.
15. De leverancier is niet verantwoordelijk voor schade of verlies van gegevens
veroorzaakt door storing, misbruik, modificatie van het apparaat of vervanging
van de batterij.
16. Zorg ervoor de verbinding niet te verbreken terwijl het apparaat bezig is met
formatteren of bestandsoverdracht. Gegevens kunnen anders corrupt of
verloren raken.
17. Als het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick
rechtstreeks in het apparaat worden gestoken. Gebruik geen
USB-verlengsnoer, omdat deze interferentie kan veroorzaken waardoor uw
gegevens verloren kunnen gaan.
18. Het nominale specificatielabel is te vinden op het onder- of achterpaneel van
het apparaat.
19. Dit product is niet bestemd voor gebruik door personen (waaronder kinderen)
met verminderde fysieke, zintuiglijke of mentale capaciteiten, of met een
tekort aan kennis en ervaring, tenzij een persoon verantwoordelijk voor hun
veiligheid toezicht houdt of instructies heeft gegeven voor het correcte
gebruik van het apparaat.
20. Dit product is uitsluitend bedoeld voor niet-professioneel gebruik en niet voor
commercieel of industrieel gebruik.
21. Zorg ervoor dit apparaat op een stabiele plek te plaatsen. Beschadigingen
veroorzaakt door het gebruik van dit apparaat in een onstabiele positie,
trillingen of schokken of door het niet opvolgen van andere waarschuwingen
of voorzorgsmaatregelen beschreven in deze gebruikshandleiding, worden
niet gedekt door de garantie.
22. Verwijder nooit de behuizing van dit apparaat.
23. Plaats dit apparaat nooit op andere elektrische apparatuur.
24. Houd plastic zakken uit de buurt van kinderen.
25. Gebruik alleen uitbreidingen/accessoires gespecificeerd door de fabrikant.
26. Laat alle reparaties over aan bevoegd onderhoudspersoneel. Reparatie is
vereist wanneer het apparaat op enigerlei wijze is beschadigd, zoals een
beschadigde voedingskabel of stekker, wanneer vloeistof is gemorst of
voorwerpen in het apparaat zijn gevallen, wanneer het apparaat is
blootgesteld aan regen of vocht, niet normaal functioneert of is gevallen.
27. Langdurige blootstelling aan harde geluiden van persoonlijke muziekspelers
kan leiden tot tijdelijk of permanent gehoorverlies.
28. Als het product wordt geleverd met een voedingskabel of AC-stroomadapter:
⚫ Als er problemen optreden, koppel de AC-voedingskabel dan los en laat
reparaties over aan bevoegd personeel.
⚫ Niet op de stroomadapter gaan staan of deze indrukken. Wees zeer
voorzichtig, vooral in de buurt van de stekkers en waar de kabel uit het
apparaat komt. Plaats geen zware voorwerpen op de stroomadapter,
om beschadiging ervan te voorkomen. Houd het gehele apparaat buiten
bereik van kinderen! Wanneer kinderen met de voedingskabel spelen,
kunnen zij ernstig letsel oplopen.
⚫ Koppel dit apparaat los tijdens onweer of wanneer deze voor een lange
periode niet wordt gebruikt.
⚫ Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd
en eenvoudig te bereiken zijn.